Product ID:VV-W-95C
MSDS Date:03/01/1991
FSC:9160
NIIN:00-701-3681
MSDS Number: BSVQD

Emergency Phone: 215-785-6511

Info Phone: 215-785-6511

Cage: 0LM34

Telephone: 215-785-6511

Cage: 0LM34

PARAFFIN WAX; (CLAY TREATED PARAFFIN WAX)

CAS: 64742-43-4

Fraction By Weight: 100%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MOLTEN WAX MAY CAUSE BURNS. MIST OR
FUMES MAY CAUSE RESPIRATORY IRRITATION OR DISCOMFORT. HOT MATERIAL
MAY CAUSE INJURY TO EYES AND SKIN. INHALATION OF FUMES FROM HOT
MATERIAL CAN PRODUCE NAUSEA AND I RRITATE UPPER RESPIRATORY TRACT.
NO HARM FROM INGESTION OF SMALL QUANTITIES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: COOL MATL SHOULD NOT CAUSE EYE IRRIT.IF HOT MATL SHOULD
ENTER EYES, FLUSH IMMED W/FRESH WATER FOR AT LST 15 MINS WHILE
HOLDING EYELIDS OPEN. SEE MD. SKIN: QUICKLY COOL IN WATER. SEE MD
FOR EXTENS IVE BURNS. DO NOT TRY TO PEEL SOLIDIFIED MATL. VEGETABLE
OIL/MINERAL OIL IS RECOM TO REMOVE MATL FROM SKIN. INHAL: REMOVE
PERSON TO FRESH AIR. SEE MD IF DISCOMFORT OR IRRIT CONTINUES.
INGEST: (SUPDAT)

Flash Point:500F,260C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER TO EXTINGUISH FLAMES. TURN
OFF HEAT SOURCE AND SMOTHER FLAMES.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:IF LIQUID, KEEP MATERIAL FROM DRAINS AND
SEWERS, AND PERMIT IT TO SOLIDIFY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT HEAT ABOVE FLASH POINT. DO NOT
HEAT WITH OPEN FLAMES OR OPEN ELECTRICAL COILS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NORMALLY NOT NEEDED. IF VAPOR OR MIST IS
GENERATED, USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE AS NEEDED. USE LOCAL EXHAUST IF REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS (SUPDAT)
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROCEDURES: NOT TOXIC. SMALL QUANTITIES WILL PASS THROUGH THE
SYSTEM. EYE PROT:GOGGLES AND FULL LENGTH FACESHIELD .

Melt/Freeze Pt:M.P/F.P Text:>135F,>57C
Spec Gravity:<1 (H*2O=1)
Solubility in Water:INSOLUBLE IN WATER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXTREMES IN HEAT AND LIGHT.
Hazardous Decomposition Products:COMPLETE COMBUSTION FORMS CARBON
DIOXIDE AND WATER. INCOMPLETE COMBUSTION CAN PRODUCE CARBON
MONOXIDE.

Waste Disposal Methods:CONTACT FEDERAL, STATE AND LOCAL ENVIRONMENTAL
AUTHORITIES FOR APPROVED DISPOSAL METHODS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.