BSWVN - 23-740

  • MSDS: BSWVN
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: 23-740
  • National Stock Number: 8010-00N048021
Product Identification

Product ID:23-740
MSDS Date:10/09/1990
FSC:8010
NIIN:00N048021
MSDS Number: BSWVN

Responsible Party
PPG INDUSTRIES INC
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300; 412-492-5555

Info Phone: 800-245-2590; 800-441-9695

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

CORROSIVE MATL; PERSISTENT SKIN/EYE IRRIT OR

RTECS: 9999999ZZ


TO DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST

RTECS: 9999999ZZ


BELOW STATED LIM & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ


NITRILE RUBBER, BUTYL RUBBER OR LATEX RUBBER

RTECS: 9999999ZZ


ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SOLVENT NAPHTHA PETROLEUM MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K


FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K


TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF

RTECS: 9999999ZZ


TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF THIS

RTECS: 9999999ZZ


FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ


SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION &
VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN:MAY CAUSE MOD
IRRIT. DRYNESS, ITCH, CRACKING, BURNING, R EDNESS & SWELL ARE
CNDTNS ASSOC W/EXCESSIVE CONT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL IF INHALED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:VAP IRRITS EYES, NOSE & THROAT. RPTD
EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN &
NERV SYS DMG. INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS
CAN BE HARMFUL/FATAL . EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF
COORD ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. CHRONIC:AVOID
(SUPDAT)

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LST 15 MINS. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY AR TF RESP & OTHER SUPPORTIVE MEASURES AS REQD. IF ANY OF
FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT POIS CTL
CTR, EMER ROOM/MD IMMED; HAVE MSDS INFO AVAIL:INGEST; EXCESSIVE
EXPOS TO(ING 10)

Fire Fighting

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA
CLASS(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS II COMBUST LIQS.
CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQS IN EXCESS OF A FEW INCHES. IF
THIS MATL IS PART OF MULTIPLE COMPONENT COATING SYS, READ MSDS(S)
FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIXTURE MAY
HAVE HAZARDS OF ALL OF ITS PARTS.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE
EXPOS. READ RESP MFR'S INSTR UCTIONS & LITERATURE CAREFULLY (ING
11)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(ING 12)
Protective Gloves:POLYVINYL ALCOHOL, NEOPRENE RUB,(ING 13)
Eye Protection:CHEM-TYPE SPLASH GOGGS & FULL FACE SHLD.
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER . WEAR
PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:II COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN
EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO
HAZ:SURFS. TOX GASES MAY FROM WHEN PROD IS CONTACTED BY FLAME/ HOT
SURFS. HAZ DECOMP PROD:FUMES INCL:CARBON MONOXIDE. EFTS OF OVEREXP:
LONG TERM & RPTD CONT. THIS PROD CONTAINS(ING 6)

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:2
Vapor Density:HVR/AIR
Spec Gravity:1.25
Evaporation Rate & Reference:17 (BUOAC=100)
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGS SECTION.
Percent Volatiles by Volume:50

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT F ACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.