BSYDM - E 2748 BLACK M C, 800057
- MSDS: BSYDM
- Manufacturer: ICI FIBERITE
- Product Name: E 2748 BLACK M C, 800057
- National Stock Number: 9330-00N043029
Product Identification
Product ID:E 2748 BLACK M C, 800057
MSDS Date:11/06/1992
FSC:9330
NIIN:00N043029
MSDS Number: BSYDM
Responsible Party
WINONA, MN 55987
US
Emergency Phone: 800-922-7745;800-424-9300(CHEMTREC)
Info Phone: 507-454-5105;507-452-8051
Preparer: BRAD DIERINGER
Cage: IO068
Contractor
Telephone: 507-454-3611
Cage: IO068
Ingredients
EPOXY RESIN
OSHA PEL N/K
ACGIH TLV: N/K
PHENOLIC RESIN
OSHA PEL N/K
ACGIH TLV: N/K
FIBERGLASS
OSHA PEL 15 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 DUST
SILICA, CRYSTALLINE - QUARTZ; (SILICA, CRYSTALLINE)
CAS: 14808-60-7
RTECS: VV7330000
OSHA PEL 0.1 MG/M3 RDUST
ACGIH TLV: 0.1 MG/M3 RDUST
ANTIMONY OXIDE (SARA III)
CAS: 1309-64-4
RTECS: CC5650000
Fraction By Weight: 1-5%
OSHA PEL 0.5 MG/M3 (SB)
ACGIH TLV: 0.5 MG/M3 (SB)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TETRABROMOBISPHENOL A
CAS: 79-94-7
OSHA PEL N/K
ACGIH TLV: N/K
EYES, MUC MEMBS & RESP TRACT & CAN CAUSE SKIN
RTECS: 9999999ZZ
IN LUNG DISEASE & TUMORS, LIVER DMG & CHANGES IN
RTECS: 9999999ZZ
HEATING OPERATIONS OCCUR.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CAUTION! MACHINING OF CURED MATL MAY
LIBERATE RESPIRABLE CRYSTALLINE SILICA PARTICLES. MAY CAUSE SKIN
IRRIT & DERM. MAY CAUSE ALLERGIC SKIN RESPONSE IN SENSITIVE
INDIVIDUALS. INGS 1 & 2:CAUSE IRRIT OF SKIN & EYES, & POSS DERM OR
ALLERGY/SENSIT. VAPS COMING OFF HEATED MATL MAY CAUSE IRRIT TO
EYES, NOSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
MONOGRAPHS, SUPP, VOL 7, PG 341, 1987:GRP 2A. NTP 6TH ANNUAL REPORT
ON CARCINS, (SUPDAT)
Effects of Overexposure:HLTH HAZ:& THROAT. LIVER & KIDNEYS MAY BE
TARGET ORGANS IF SOME EPOXIES ARE INGESTED. EPOXIES ARE COMMONLY
MUTAGENIC TO BACTERIA. ING 3:INERT, HOWEVER, ABRASIVE & IRRIT
CHARACTS MAY BE NOTED AFTER PAR TICULATE CONT W/SKIN OR MUC MEMBS
OF EYES & NOSE. ING 4:SILICOSIS (MASSES OF FIBROUS TISS (SUPP DATA)
Medical Cond Aggravated by Exposure:EXISTING ALLERGIES MAY BE
AGGRAVATED.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. PROVIDE OXYGEN IF NEC. IF NOT
BRTHG, GIVE MOUTH-TO-MOUTH RESUSCITATION. CALL MD. EYES: IRRIGATE
W/WATER FOR MIN OF 15 MINS. SEEK MED ATTN. SKIN:WASH THORO W/SOAP &
WATER. SE EK MED ATTN IF IRRIT DEVELOPS. WASH CONTAM CLTHG BEFORE
REUSE. INGEST:INDUCE VOMIT IF LG AMTS ARE INGESTED. NEVER GIVE
ANYTHING BY MOUTH TO/INDUCE VOMIT ON UNCONSCIOUS VICTIM.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CONTAMINATED MATERIAL SHOULD BE PICKED UP &
DISPOSED OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AT/<65F. USE OF GLOVES WHEN
HNDLG UNCURED MATL IS REC. WHEN PROCESSING AT ELEVATED TEMPS,
PROVIDE ADEQ VENT TO CONTROL PROCESSING FUMES & VAPS.
Other Precautions:AVOID SKIN CONTACT. THIS PRODUCT CONTAINS UNCURED
RESIN(S). CURING SHOULD ONLY BE DONE IN WELL-VENTILATED OR CLOSED
SYSTEMS.
Exposure Controls
Respiratory Protection:USUALLY NOT NEEDED. USE NIOSH/MSHA APPRVD RESP
IF EXPOS LIMS ARE EXCEEDED. IN ABSENCE OF ADEQ GEN/LOC VENT,
PROVIDE NIOSH/ MSHA APPRVD RESPS TO MIN EXPOS TO GAS, VAPS OR FUMES
RELEASED DURING LAY UP O R MOLDING OPERATIONS.
Ventilation:PROVIDE GOOD GEN &/OR LOC EXHST VENT TO CONTROL AIRBORNE
LEVELS BELOW EXPOS LIMS, PARTICULARLY WHERE GRINDING OR (ING 9)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APP CHEM WORK GOG&FULL FCSHLD
Other Protective Equipment:AVOID SKIN CONTACT W/RESIN OR UNCURED
MATERIAL! USE CLEAN BODY-COVERING CLOTHING TO PREVENT EXPOSURE.
Work Hygienic Practices:IN ACCORDANCE W/GOOD INDUSTRIAL HYGIENE, HANDLE
W/CARE & AVOID UNNECESSARY PERSONAL CONTACT.
Supplemental Safety and Health
EXPLAN OF CARCIN:1991:ANTIC TO BE CARCIN. ANTIMONY TRIOXIDE:IARC
MONOGRAPHS ON EVALUATION OF CARCIN RISK OF CHEMS TO MAN, VOL 47, PG
291, 1989:GRP 2B. EFTS OF OVEREXP:GROWTH IN LUNGS) CAN RSLT FROM PR
LNG INHAL, PROGRESSIVELY CAUSING SHORTNESS OF BREATH, LTD CHEST
EXPANSION, COUGH & PAIN IN LUNGS. ING 5:IRRITS (ING 7)
Chemical Properties
HCC:T6
Spec Gravity:1.78-1.83
Appearance and Odor:BLACK MOLDING MATERIAL; SLIGHT ODOR.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG BASES, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DENSE SMOKE, ACRID VAPORS & FUMES,
HYDROCARBONS OF VARIABLE COMPOSITION, COX, NOX.
Conditions to Avoid Polymerization:RAPID OR EXCESSIVE HEATING.
DISSIPATE HEAT BY SPREADING MATL APART & DOUSING W/WATER. CONTAIN
EMISSIONS USING LOC EXHST.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. QUESTIONS CONCERNING DISPOSAL SHOULD BE DIRECTED TO
ICI FIBERITE'S SAFETY, HEALTH & ENVIRONMENTAL AFFAIRS DEPARTMENT
FOR EVALUATION ON A CASE-BY-CA SE BASIS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.