BSYRQ - HONING OIL 362
- MSDS: BSYRQ
- Manufacturer: G C LUBRICANTS CO
- Product Name: HONING OIL 362
- National Stock Number: 9150-00N042917
Product Identification
Product ID:HONING OIL 362
MSDS Date:07/27/1988
FSC:9150
NIIN:00N042917
MSDS Number: BSYRQ
Responsible Party
SAN CARLOS, CA 94070
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 415-592-1050
Cage: 0HJB5
Contractor
Telephone: (415) 592-1050
Cage: 0HJB5
Ingredients
KEROSENE
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 31.1%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:UNKNOWN - NO HISTORY OF HEALTH
HAZARDS W/THIS PRODUCT. CHRONIC:PROLONGED OR REPEATED SKIN CONTACT
MAY CAUSE IRRITATION OR DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN CONDITIONS.
First Aid
First Aid:INHAL:MOVE VICTIM AWAY FROM AREA TO FRESH AIR. RESUSCITATE &
ADMINISTER OXYGEN. CONSULT MD. EYES:IMMED FLUSH W/PLENTY OF WATER
FOR AT LST 15 MINS. HOLD EYELIDS APART TO INSURE FLUSHING OF ENTIRE
EYE. SEE MD. SKIN:WASH ALL CONTAM AREAS W/PLENTY OF SOAP & WATER.
WASH ALL CONTAM CLOTHING BEFORE RE-USE. INGEST:NEVER GIVE ANYTHING
BY MOUTH TO UNCONSCIOUS PERSON. DO NOT INDUCE VOMIT. CONSULD MD
IMMED.
Fire Fighting
Flash Point:340F,171C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . FIRE YIELDS CARBON MONOXIDE, CARBON DIOXIDE & HYDROGEN
CHLORIDE GAS.
Unusual Fire/Explosion Hazard:THIS MATL SHOULD BE TREATED AS AN OIL
WHEN EXPOSED TO FIRE. OVERPRESSURIZATION WILL OCCUR WHEN CNTNR IS
EXPOSED TO FIRE. USE WATER TO COOL FIRE-EXPOSED CNTNRS.
Accidental Release
Spill Release Procedures:CONTAIN W/ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE NORMAL GOOD PRACTICES.
Other Precautions:DO NOT INGEST.
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:APPROPRIATE VENTILATION. LOCAL EXHAUST SUGGESTED.
MECHANICAL (GENERAL) ACCEPTABLE.
Protective Gloves:LATEX GLOVES.
Eye Protection:ANSI APPRVD CHEM SAFETY GOGGLES .
Other Protective Equipment:NONE REQUIRED FOR NORMAL OPERATIONS.
Work Hygienic Practices:WASH ALL CONTAMINATED CLOTHING BEFORE RE-USE.
ALWAYS WASH HANDS PRIOR TO SMOKING & EATING.
Supplemental Safety and Health
MATLS TO AVOID:POTASSIUM HYDROXIDE. THE PRESENCE OF ZINC OR IRON IN ANY
FORM WILL CATALYZE THIS REACTION.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:320F,160C
Vapor Pres:1
Vapor Density:>1
Spec Gravity:0.91 (H2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN LIQUID.
Percent Volatiles by Volume:0.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID, HYDROGEN PEROXIDE &
CHROMIC ACID. STRONG ALKALIES SUCH AS SODIUM & (SUPDAT)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FIRE YIELDS CARBON MONOXIDE, CARBON
DIOXIDE & HYDROGEN CHLORIDE GAS.
Disposal
Waste Disposal Methods:INCINERATE OR BURY IN A LICENSED CHEMICAL WASTE
DISPOSAL SITE OR DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.