BTCCJ - C-10
- MSDS: BTCCJ
- Manufacturer: INTERSTATE CHEMICAL CO
- Product Name: C-10
- National Stock Number: 6850-00F033302
Product Identification
Product ID:C-10
MSDS Date:01/07/1991
FSC:6850
NIIN:00F033302
MSDS Number: BTCCJ
Responsible Party
HERMITAGE, PA 16148
US
Emergency Phone: 412-981-3771
Info Phone: 412-981-3771
Preparer: F. JAMES CORBETT
Cage: ICHEM
Contractor
Telephone: 412-981-3771
Cage: ICHEM
Ingredients
MAGNESIUM PHOSPHATE, MONOBASIC
CAS: 13092-66-5
Fraction By Weight: 49.8%
CHROMIC ACID (CHROMIUM TRIOXIDE, CRO3)
CAS: 7738-94-5
RTECS: GB2450000
Fraction By Weight: 0.3%
ACGIH TLV: 0.05 MG/CUM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 49.9%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION/SKIN/EYES: CAUSES BURNS, MAY
CAUSE TISSUE DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING, GIVE LARGE QUANTITIES OF
WATER. EYES/SKIN: FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Accidental Release
Spill Release Procedures:NEUTRALIZE, FLUSH W/LARGE AMOUNTS OF WATER.
Neutralizing Agent:SODA ASH
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED.
Other Precautions:CORROSIVE LIQUID. AVOID SKIN CONTACT. AVOID SPLASHING
INTO EYES. AVOID MIST.
Exposure Controls
Respiratory Protection:NIOSH ACID MIST CARTRIDGE
Ventilation:MECHANICAL (GENERAL): ADEQUATE
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:RUBBER APRON & BOOTS
Work Hygienic Practices:WASH THOROUGHLY. KEEP AWAY FROM FOOD.
Supplemental Safety and Health
PERCENT VOLATILE VOLUME (WATER): 49.9.
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.475
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, LIGHT ORANGE, VISCOUS LIQUID; ODORLESS
Percent Volatiles by Volume:SUPP
Stability
Stability Indicator/Materials to Avoid:YES
ORGANIC SOLVENTS
Stability Condition to Avoid:HEAT
Disposal
Waste Disposal Methods:SEAL IN DRUMS, DISPOSE OF IN TOXIC LANDFILL IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.