BTCTY - GREENGUN-45
- MSDS: BTCTY
- Manufacturer: A P GREEN INDUSTRIES INC
- Product Name: GREENGUN-45
- National Stock Number: 6850-00F032596
Product Identification
Product ID:GREENGUN-45
MSDS Date:04/17/1991
FSC:6850
NIIN:00F032596
MSDS Number: BTCTY
Responsible Party
MEXICO, MO 65265-2582
US
Emergency Phone: 314-473-3626
Info Phone: 314-473-3626
Cage: 84446
Contractor
Telephone: 573-473-3626
Cage: 84446
Ingredients
GLASS DUST
Fraction By Weight: <5%
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 1-4%
ACGIH TLV: 0.1 MG/CUM RESP DUST
SILICA CRYSTALLINE, SILICA (CRISTOBALITE) (SUSPECTED HUMAN
CAS: 14464-46-1
RTECS: VV7325000
Fraction By Weight: 3-12%
ACGIH TLV: 0.05 MG/CUM
ALUMINUM SULFATE
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: <5%
ACGIH TLV: 2 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: MECHANICAL IRRITATION. ALUMINUM
SULFATE MAY CAUSE EYE DAMAGE. SKIN: MECHANICAL ABRASION, ALUMINUM
SULFATE MAY CAUSE INJURY. INHALATION: UPPER RESPIRATORY IRRITATION.
PROLONGED EXPOSURE MAY CAUSE LUNG DAMAGE, SILICOSIS, OR OTHER
RESPIRATORY DISEASES. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Explanation of Carcinogenicity:SEE INGREDIENTS
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER,
TREAT ABRASIONS USING NORMAL FIRST AID PROCEDURES. INHALATION:
REMOVE TO FRESH AIR. INGESTION: CONTACT PHYSICIAN IMMEDIATELY.
DON'T INDUCE V OMITING UNLESS INSTRUCTED TO DO SO BY PHYSICIAN.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NON-COMBUSTIBLE
Unusual Fire/Explosion Hazard:THE ALUMINUM SULFATE PRESENT IF HEATED TO
DECOMPOSITION WILL EMIT TOXIC FUMES OF SULFUR OXIDES.
Accidental Release
Spill Release Procedures:SWEEP, SHOVEL UP, OR PICK UP.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHEN WORKING
AROUND DRIED MATERIAL OR WHEN REMOVING THIS PRODUCT AFTER SERVICE.
THE PRESENCE OF FOREIGN SUBSTANCES MAY WARRANT ADDITIONAL
PRECAUTIONS DURING TEAROUT & DIS POSAL.
Ventilation:GENERAL MECHANICAL IS ADEQUATE
Protective Gloves:LEATHER
Eye Protection:GOGGLES OR SAFETY GLASSES
Other Protective Equipment:LONG-SLEEVED & LONG-LEGGED CLOTHING PROTECTS
HANDS, ARMS & LEGS FROM SKIN CONTACT & ABRASION. SAFETY SHOES
Supplemental Safety and Health
Chemical Properties
Spec Gravity:2.6
Solubility in Water:SLIGHT
Appearance and Odor:GRAY GRANULAR SOLID W/NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:MAY BE DISPOSED OF IN AN APPROVED LANDFILL, IN
ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.