Product ID:DYHOLD
MSDS Date:01/04/1993
FSC:3439
NIIN:00N043115
MSDS Number: BTFXL

DYTRON CORP

17000 MASONIC BLVD
FRASER, MI 48026
US

Emergency Phone: 313-296-9600

Info Phone: 313-296-9600

Cage: 69702

DYTRON CORP

FRASER, MI 48026 US

Telephone: 313-296-9600

Cage: 69702

EXPECTED FUME CONSTITUENTS MAY INCL CARBON MONOXIDE

RTECS: 9999999ZZ

FORMED BY RADIA FROM ARC. ONE REC WAY TO DETERMINE

RTECS: 9999999ZZ

ARE EXPOS IS TO TAKE AN AIR SAMPLE INSIDE WELDERS

RTECS: 9999999ZZ

FILTER LENS. AS A RULE OF THUMB, START W/SHADE

RTECS: 9999999ZZ

LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF WELD

RTECS: 9999999ZZ

SHIELD OTHERS.

RTECS: 9999999ZZ

ELEC SHOCK. SEE ANSI Z49.1. THIS MAY INCL

RTECS: 9999999ZZ

AS DARK SUBSTANTIAL CLOTHING.

RTECS: 9999999ZZ

SILICATE, MICA; (MUSCOVITE POTASSIUM)

CAS: 12001-26-2

RTECS: VV8760000

OSHA PEL 3 MG/M3 RDUST

ACGIH TLV: 3 MG/M3 RDUST

ALGINIC ACID, SODIUM SALT; (SODIUM ALGINATE)

CAS: 9005-38-3

RTECS: AZ5820000

OSHA PEL N/K

ACGIH TLV: N/K

SODIUM CHLORIDE

CAS: 7647-14-5

RTECS: VZ4725000

OSHA PEL N/K

ACGIH TLV: N/K

107-22-1.

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

CI PIGMENT BLUE; (SODIUM ALUMINASULPHIC SILICATE)

CAS: 57455-37-5

OSHA PEL N/K

ACGIH TLV: N/K

OTHER INGREDIENTS (NON-TOXIC OR CARCINOGENIC)

OSHA PEL N/K

ACGIH TLV: N/K

HEAD W/RESPECT TO FUME PLUME, AS WELL AS PRESENCE OF

RTECS: 9999999ZZ

FROM CLEANING & DEGREASING ACTIVITIES. WHEN ELECTRODE

RTECS: 9999999ZZ

DIFF IN PERCENT & FORM FROM INGS LISTED. FUME & GAS

RTECS: 9999999ZZ

DECOMP PRODS INCL THOSE ORIGINATING FROM

RTECS: 9999999ZZ

COATING, ETC. THESE COMPONENTS ARE VIRTUALLY ALWAYS

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING/OXY FUEL WELDING
MAY CREATE ONE/MORE OF THE FOLLOWING HEALTH HAZARDS. FUMES & GASES
CAN BE DANGEROUS TO YOUR HEALTH. ACUTE:SHORT TERM OVEREXPOSURE TO
WELDING FUMES MAY RESULT IN D ISCOMFORT SUCH AS DIZZINESS, NAUSEA
OR DRYNESS OR IRRITATION OF NOSE, THROAT OR EYES. CHRONIC:LONG
TERM(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE MAY LEAD TO SIDEROSIS
(IRON DEPOSITS IN THE LUNG) & IS BELIEVED BY SOME INVESTIGATIONS TO
AFFECT PULMONARY FUNCTIONS. ARC RAYS CAN INJURE EYES & BURN SKIN.
ELECTRIC SHOCK CAN KIL L. CADMIUM, NICKEL, CHROMIUM & THEIR
COMPOUNDS ARE CONSIDERED POSSIBLE CARCINOGENS BY EITHER OSHA, IARC
OR NTP.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST:CALL MD IMMEDIATELY .
INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ ARTF RESP) .
EY ES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .

Flash Point:NONFLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING THE USE OF WELDING & ALLIED PROCEDURES.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS HEAD OF THE
FUMES. TRAIN WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS & TO
INSULATE HIMSELF FROM WORK & GROUND.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PRECAUTIONARY
LBL ON PROD. SEE ANSI Z49.1, SFTY IN WELDING & CUTTING PUBLISHED BY
AWS, P. O. BOX 351040, MIAMI, FL 33135 & OSHA PUB 2206 (29CFR1910),
U.S. GOVT P RINTING OFC, WASHINGTON D.C. 20402.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT THE ARC, OR BOTH, TO KEEP
FUMES & GASES BELOW TLV'S IN WORKERS BTHG ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD W/ (ING 15)
Other Protective Equipment:EMER EYE WASH & DELUGE SHOWER . WEAR HEAD,
HAND & BODY PROT WHICH HELP TO PVNT INJURY FROM RADIA, SPKS & (ING
18)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:WELDED, PROCESS, PROCS & CONSUMABLES USED. OTHER CNDTNS
WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKERS MAY BE EXPOS INCL: COATINGS ON METAL BEING USED (SUCH A S
PAINT, PLATING/GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA,
QUALITY & AMT OF VENT, POSITION OF WELDER'S (ING 7)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (SUPP DATA)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.