BTJCR - E-BOND 1241 EPOXY ADHESIVE-STD SET,HARDENER(PIGMENTED BLACK)
- MSDS: BTJCR
- Manufacturer: E BOND EPOXIES INC
- Product Name: E-BOND 1241 EPOXY ADHESIVE-STD SET,HARDENER(PIGMENTED BLACK)
- National Stock Number: 8010-00F002804
Product Identification
Product ID:E-BOND 1241 EPOXY ADHESIVE-STD SET,HARDENER(PIGMENTED BLACK)
MSDS Date:05/15/1991
FSC:8010
NIIN:00F002804
Kit Part:Y
MSDS Number: BTJCR
Responsible Party
FT. LAUDERDALE, FL 33307
US
Emergency Phone: 800-255-3924
Info Phone: 305-566-6555
Cage: F6245
Contractor
Telephone: 305-566-6555
Cage: F6245
Ingredients
N-AMINOETHYLPIPERAZINE
CAS: 140-31-8
RTECS: TK8050000
Fraction By Weight: N/GIVEN
PHENOL, 4-NONYL, BRANCHED
CAS: 84852-15-3
Fraction By Weight: N/GIVEN
Hazards
LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:INHAL:RESPIRATORY TRACT IRRIT.
SKIN:PRODUCT IS MODERATELY IRRIT. MAY CAUSE IRRIT &/OR
SENSITIZATION AFTER REPEATED CONTACT. EYE:IRRIT. REPEATED CONTACT
MAY CAUSE SEVERE EYE INJURY. DAMAGE MAY BE IRREV ERSIBLE.
INGEST:EXPECTED TO BE SLIGHTLYTOXIC BY THIS ROUTE.
Explanation of Carcinogenicity:PER MFG'S MSDS NOT ESTABLISHED.
Effects of Overexposure:A SKIN SENSITIZER. MILD SKIN & EYE IRRITANT.
INHAL:HEADACHES, NAUSEA, DIZZINESS.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE/SKIN/RESPIR
DISORDERS MAY BE AGGRAVATED BY EXPOSURE OF THIS
PRODUCT.PRE-EXISTING SKIN OR RESPIR ALLERGYS MAY INCREASE THE
CHANCE OF DEVELOPING INCREASE ALLERGY SYMPTOMS FROM EXPOSURE
First Aid
First Aid:EYE:FLUSH W/PLENTY OF WATER FOR 15MINS HOLDING EYELIDS
OPEN.GET MED ATTN.SKIN:REMOVE CONTAMINATED CLOTHING/SHOES.WIPE
EXCESS FROM SKIN.FLUSH SKIN W/WATER,WASH W/SOAP & WATER.IF IRRIT
OCCURS GET MED AT TN.INHAL:REMOVE TO FRESH AIR.PROVIDE OXYGEN IF
BREATHING IS DIFFICULT.GIVE ARTIFI RESP IF NOT BREATHING.GET MED
ATTN.INGEST:DO NOT INDUCE VOMIT.IF VOMIT OCCURS SPONTA KEEP HEAD
BELOW HIPS.GET MED ATTN
Fire Fighting
Flash Point Method:OC
Flash Point:390F,199C
Extinguishing Media:WATER FOG, ALCOHOL FOAM, CARBON DIOXIDE, DRY
CHEMICAL.
Fire Fighting Procedures:DECOMPOSITION & COMBUSTION PRODUCTS MAY BE
TOXIC. USE FULL PROTECTING CLOTHING. USE WATER TO COOL FIRE-EXPOSED
CONTAINER.
Unusual Fire/Explosion Hazard:USE A POSITIVE PRESSURE, SELF-CONTAINED
BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:ABSORB INTO SAND OR OTHER ABSORBENT MATERIAL.
SHOVEL INTO CLOSED CONTAINER FOR DISPOSAL. WEAR PROTECTIVE
EQUIPMENT SPECIFIED. FLUSH CONTAMINATED AREA WITH WATER. KEEP OUT
OF SURFACE WATERS, SEWERS & W ATER WAYS ENTERING OR LEADING TO
SURFACE WATERS.
Neutralizing Agent:NOT GIVEN.
Handling
Handling and Storage Precautions:AVOID CONTACT W/SKIN. AVOID BREATHING
VAPOR/MIST/SPRAY. STORE IN CLOSED, COOL & DRY AREA. PROVIDE GOOD
VENTILATION. KEEP AWAY FROM HEAT & OPEN FLAMES.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. FOR INDUSTRIAL
USE ONLY.
Exposure Controls
Respiratory Protection:USE NIOSH-APPROVED RESPIRATOR FOR ORGANIC VAPORS
IF REQUIRED.
Ventilation:GOOD MECHANICAL VENTIALTION & LOCAL EXHAUST. CONTROL
AIRBORNE CONCENTRATION BELOW EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH PROOF CHEM GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAIN. WEAR PROTECTIVE EQUIPMT
TO PREVENT EXPOSURE & PERSONAL CONTACT. USE OF BARRIER CREAM IS
RECOMMENDED.
Work Hygienic Practices:USE GOOD CAUTION & PERSONAL CLEANLINESS.
CONTAMINATED CLOTHING TO BE WASHED BEFORE REUSE. WASH AFTER
HANDLING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:390F,199C
Vapor Pres:<1
Vapor Density:3.0
Spec Gravity:1.38-1.40
Evaporation Rate & Reference:<1 (REF NOT GIVEN)
Solubility in Water:SLIGHTLY SOLUBLE
Appearance and Odor:BLACK PASTE, AMMONIA AMINE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & EPOXY RESINS UNDER UNCONTROLLED CONDITONS.
STR0NG REDUCING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES, STRONG OXIDIZING &
REDUCING AGENTS, STRONG OXIDANTS & EPOXY RESINS UNDER UNCONTROLLED
CONDITIONS.
Hazardous Decomposition Products:OXIDES OF NITROGEN & HAZ GASES SUCH AS
CARBON MONOXIDE, CARBON DIOXIDE, HYDROCARBONS & AMMONIA.
Disposal
Waste Disposal Methods:PLACE IN APPROPRIATE DISPOSABLE FACILITY IN
COMPLIANCE W/LOC/STATE/FED PROTECTION AGENCY REGULATIONS. NOTIFY
AUATHORITIES OF WHEN EXPOSURE TO THE GENERAL PUBLIC OR ENVIRONMENT
OCCURS AND/OR IS LIKELY TO OCCUR.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.