BTJDR - AMERLOCK 400GFA RESIN
- MSDS: BTJDR
- Manufacturer: AMERON PROTECTIVE COATINGS
- Product Name: AMERLOCK 400GFA RESIN
- National Stock Number: 8010-00N044291
Product Identification
Product ID:AMERLOCK 400GFA RESIN
MSDS Date:05/28/1992
FSC:8010
NIIN:00N044291
MSDS Number: BTJDR
Responsible Party
BREA, CA 92622-1020
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 714-529-1951
Preparer: H. KLINE
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE). PIGMENT CONTENTS
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: <25%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
IRON (III) OXIDE; (IRON OXIDE). PIGMENT CONTENT DEPENDS ON
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: <10%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE)
PROPANOL, (1,1-DIMETHYLETHOXY)-; (PROPYLENE GLYCOL BUTYL
CAS: 57018-52-7
RTECS: UB3772000
Fraction By Weight: 3.13%
OSHA PEL N/K
ACGIH TLV: N/K
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (HIGH FLASH
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 2.81%
OSHA PEL N/K
ACGIH TLV: N/K
BENZENE, 1,2,4-TRIMETHYL-; (1,2,4-TRIMETHYLBENZENE)
CAS: 95-63-6
RTECS: DC3325000
Fraction By Weight: 1.36%
OSHA PEL 25 PPM
ACGIH TLV: 25 PPM
CARBON BLACK. PIGMENT CONTENT DEPENDS ON COLOR
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
RHEOLOGY ADDITIVE
CAS: 121888-68-4
Fraction By Weight: <5%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <1%
OSHA PEL 0.1 MG/M3 RDUST
ACGIH TLV: 0.1 MG/M3 RDUST
(ORAL,RAT)11.4G/KG
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: <50%
OSHA PEL N/K
ACGIH TLV: N/K
FIBROUS GLASS (GLASS BEADS); (GLASS FLAKE)
CAS: 65997-17-3
Fraction By Weight: <30%
OSHA PEL 15 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAP/SPRAY MIST CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, NOSE & THROAT. EXCESS INHAL CAN CAUSE
HDCH, NAUS/DIZZ. RPTD & PRLNGD OCCUP OVEREXP TO SOLV IS ASSOC
W/PERM BRAIN & NERV SYS DAM. CAN BE HARMFUL IF SWALLOWED. CAN BE
HARMFUL IF INHALED. CAN BE HARMFUL IF INHALED/ ABSORBED THRU SKIN.
OVEREXP (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA-QUARTZ: IARC
MONOGRAPHS, SUPPLEMENT. VOL 7, PG 341, 1987: GRP 2A. NTP 6TH ANNUAL
REPORT (SUPP DATA)
Effects of Overexposure:HLTH HAZ: CAN CAUSE SEV SKIN IRRIT. SKIN
SENSIT/ALLERGIC RXN CAN OCCUR SUCH AS RASH/HIVES. ASPIRATION
HAZARD.
Medical Cond Aggravated by Exposure:RESPIRATORY. ALLERGIES. SKIN. EYES.
First Aid
First Aid:INHAL: PROVIDE FRESH AIR; IF BRTHG LABORED, GIVE OXYGEN/ARTF
RESP. SKIN: WASH THORO W/SOAP & WATER. EYES: FLUSH IMMED W/PLENTY
OF WATER FOR @ LST 15 MIN & GET MED ATTN. INGEST: DRINK 1-2 GLASSES
OF WA TER TO DILUTE. DO NOT INDUCE VOMIT. CONSULT PHYS/POIS CTL CTR
IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:SCC
Flash Point:131F,55C
Lower Limits:0.50%
Upper Limits:6.80%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS & OPEN FLAME.
PVNT STATIC DISCHARGE. AN INGRED MAY PRDCE (SUPP DATA)
Accidental Release
Spill Release Procedures:AVOID BRTHG OF VAPS. USE ABSORBENT CLEANUP
MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS AND
WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOURCES O F IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTR CLSD, UPRIGHT WHEN NOT IN
USE. STORE IN COOL, DRY, WELL-VENTD AREA. AVOID STOR TEMP ABOVE
100F. DO NOT TAKE INTERNALLY.
Other Precautions:AVOID PRLNGD BRTHG OF VAP/SPRAY MIST/CONT W/SKIN &
EYES. DESTROY CONTAMD LEATHER & ABSORB SHOES WHICH CANNOT BE
DECONTAMD. CONT LENSES SHOULD NOT BE WORN WHEN USING MATL. DO NOT
WELD/FLAME CUT AN EMPT Y CONTR. GROUND CONTRS WHEN POURING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA CERTIFIED RESP. FOR SPEC CNDTNS,
REFER TO CURRENT NIOSH POCKET GUIDE TO CHEM HAZS. USE NIOSH/MSHA
APPRVD AIR-LINE RESP IN CONFINED/RESTRICTED VENT AREAS. REFER TO 29
CFR, OSHA PARTS 1910 & 1915, FOR COATING OPERATIONS.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIM. REMOVE WELD/ (SUPP DATA)
Protective Gloves:NEOPRENE, OTHER SUITABLE (SUPP DATA)
Eye Protection:ANSI APVD CHEM SFTY GOG & (OTR PROT EQT)
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT. EYE PROT: FULL LENGTH FACESHIELD .
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING/USING
WASHROOM. LAUNDER CONTAMD CLTHG BEFORE REUSE.
Supplemental Safety and Health
EVAP RATE: 0.30-0.37(BUTYL ACETATE=1). EXPLO HAZ: A FLOATING FIRE HAZ.
EXPLAN OF CARCIN: ON CARCINS, 1991: ANTIC TO BE CARCIN. VENT: FLAME
CUTTING DECOMP PROD. REFER TO 29 CFR, OSHA PARTS 1910 & 1915, FOR
COATING OPERATIONS. PROT GLOVES: IMPERVIOUS MATERIALS FOR
SOLVENT(S).
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>304F,>151C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.38-1.68
Evaporation Rate & Reference:SUPP DATA
Appearance and Odor:LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:13
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC/SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
IRON OXIDE FUMES. ALDEHYDES.
Disposal
Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER I/A/W
APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS. EPA WASTE # D001.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.