BTKCV - TONER CARTRIDGE FOR LASER BEAM PRINTER P90 FOR HP(SEE SUPPL)
- MSDS: BTKCV
- Manufacturer: CANON INC
- Product Name: TONER CARTRIDGE FOR LASER BEAM PRINTER P90 FOR HP(SEE SUPPL)
- National Stock Number: 6850-00F034651
Product Identification
Product ID:TONER CARTRIDGE FOR LASER BEAM PRINTER P90 FOR HP(SEE SUPPL)
MSDS Date:01/25/1993
FSC:6850
NIIN:00F034651
MSDS Number: BTKCV
Responsible Party
TOKYO
Emergency Phone: 09-3758-2111
Info Phone: 09-3758-2111
Cage: GO330
Contractor
Telephone: 619-487-4100
Cage: 98220
Ingredients
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 30-40%
STYRENE ACRYLATE COPOLYMER
Fraction By Weight: 45-55%
Hazards
LD50 LC50 Mixture:OSHA(TWA/PEL): 15MG/M3 (TOTAL DUST)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE UNTIL
THE CARTRIDGE IS FORCED TO BE BROKEN. EFFECTS OF
OVEREXPOSURE:MINIMAL RESP TRACT IRRIT MAY OCCUR AS WITH EXPOSURE TO
LARGE AMOUNTS OF ANY DUST. EYE:NO SPECIFIC HAZ ARD IS KNOWN TO
CANON. HOWEVER ANY MATERIAL THAT CONTACTS THE EYE MAY BE
IRRITATING.
Effects of Overexposure:RESP TRACT IRRITATION.
Medical Cond Aggravated by Exposure:NONE GIVEN.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE. EYE:FLUSH WITH PLENTY OF WATER.
IF IRRIT PERSISTS CONTACT A PHYSICIAN. SKIN:WASH WITH SOAP AND
WATER.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE,WATER,DRY CHEMIC.MATERIAL NON-FLAMM
ACCORDING TO TEST METHOD USA16 CFR 1500.44 & 84/449/EEC(ANNEX V
A.10)
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:THIS MATERIAL LIKE MOST ORGANIC MATERIAL
IN POWDER FOAM IS CAPABLE OF CREATAING A DUST EXPLOSION.
Accidental Release
Spill Release Procedures:SWEEP MATERIAL ONTO PAPER OR COLLECT IT.
Neutralizing Agent:NONE GIVEN.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NONE GIVEN.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
CANON ITEM #:R74-2001.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.5-1.8
Evaporation Rate & Reference:NEGLIGIBLE (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER WITH SLIGHT PLASTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE GIVEN.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.
Disposal
Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE IS REQUIRED.
ENSURE COMPLIANCE WITH FEDERAL, STATE, LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.