BTLSC - 556 LATEX ADHESIVE
- MSDS: BTLSC
- Manufacturer: R C MUSSON RUBBER CO
- Product Name: 556 LATEX ADHESIVE
- National Stock Number: 8040-00N044249
Product Identification
Product ID:556 LATEX ADHESIVE
MSDS Date:09/01/1990
FSC:8040
NIIN:00N044249
MSDS Number: BTLSC
Responsible Party
AKRON, OH 44306
US
Emergency Phone: 800-228-5635
Info Phone: 800-228-5635
Preparer: FRED R. DAVIS
Cage: 20326
Contractor
Telephone: 800-228-5635
Cage: 20326
Ingredients
2@20C. FL PT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 1-10%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
ETHYLENE GLYCOL
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1-10%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM,VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
97 GRAMS VOC/LITER OF MATERIAL
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
140 GRAMS VOC/LITER, LESS WATER
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED. EYE
CONTACT MAY CAUSE IRRITATION. PROLONGED/REPEATED SKIN CONTACT
W/PRODUCT MAY CAUSE IRRITATION. INHAL OF HIGH VAPOR CONCENTRATIONS
MAY CAUSE DIZZINESS OR HEADACHES. CHRO NIC: NO ANTICIPATED CHRONIC
EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.
First Aid
First Aid:INGEST: IF PERSON CAN SWALLOW, GIVE 1 GLASS OF WATER/MILK. DO
NOT INDUCE VOMITING. GET IMMED MED ATTN. EYE: FLUSH IMMED W/WATER
FOR AT LEAST 15 MINUTES. GET IMMED MED ATTN. SKIN: WASH AFFECTED
AREA WI TH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER
BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. KEEP WARM AND QUIET. GET
MED ATTN.
Fire Fighting
Flash Point Method:SCC
Flash Point:ING 1
Lower Limits:ING 1
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, CHEMICAL FOAM, WATER
SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSE CONTAINERS MAY RUPTURE WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:SCRAPE UP AND PLACE IN DISPOSAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL DILUTION VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES
Other Protective Equipment:EYE WASH WHICH MEETS ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>200F,>93C
pH:8.9
Appearance and Odor:LIQUID
Percent Volatiles by Volume:36(WT)
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS AND CARBON MONOXIDE.
Disposal
Waste Disposal Methods:THIS PRODUCT DOES NOT MEET DEFINITION OF
HAZARDOUS WASTE UNDER 40 CFR 261. DISPOSE OF I/A/W LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.