BTMZC - MIL-C-2275OE 26521 COMP B
- MSDS: BTMZC
- Manufacturer: SEAGRAVE COATINGS CORP OF VA
- Product Name: MIL-C-2275OE 26521 COMP B
- National Stock Number: 8010-01-033-7794
Product Identification
Product ID:MIL-C-2275OE 26521 COMP B
MSDS Date:10/29/1992
FSC:8010
NIIN:01-033-7794
Kit Part:Y
MSDS Number: BTMZC
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 804-488-4411
Cage: 60163
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
3 @ 20C.
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 30%
OSHA PEL 400 PPM;500 PPM STEL
ACGIH TLV: 400 PPM;500 PPM STEL
UNIDENTIFIED COMPONENTS
Fraction By Weight: 75%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRITATION TO RESPIRATORY TRACT,
HEADACHE, DIZZINESS & NAUSEA. SKIN CONTACT:PRIMARY IRRITATION. EYE
CONTACT:PRIMARY IRRITATION. CHRONIC HEALTH EFFECTS ARE POSSIBLE
FROM LONG TERM EXPOSURE TO THI S MATERIAL, INCLUDING DRYING,
CRACKING & IRRITATION OF THE SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR,
RESTORE BREATHING. CONSULT MD. SKIN:FLUSH W/WATER. EYE:FLUSH
IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
CONSULT MD.
Fire Fighting
Flash Point Method:TCC
Flash Point:54.0F,12.2C
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLSD CONTAINERS TO PVNT PRESS BUILD-UP &
POSS AUTOIGNIT/EXPLO WHEN EXPOS (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS & OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES & ANYTHING WHICH COULD CAUSE
FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA
W/VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENTS
SECTION.
Other Precautions:PROVIDE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
AGAINST FUMES GENERATED DURING BURNING. SMOKE IN DESIGNATED AREAS
ONLY.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESP TYPES SUITABLE FOR MATLS
IN INGS SECTION REC. NIOSH/MSHA APPRVD CHEM/MECH FILTERS REC WHEN
VENT IS RESTRICTED. NIOSH/MSHA APPRVD AIRLINE TYPE RESP/HOODS REC
IN CONFINED AREAS.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM BELOW CURRENT APPLIC PEL/TLV LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM SAFETY GOGGLES
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. REMOVE &
WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FIRE FIGHT PROC:TO EXTREME HEAT.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:0.97
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID; ALCOHOL SOLVENT ODOR.
Percent Volatiles by Volume:31.5
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS W/ANY OTHER ORGANIC MATERIALS,
COMBUSTION WILL PRODUCE CARBON DIOXIDE & PROBABLY CARBON MONOXIDE.
Disposal
Waste Disposal Methods:SOAK LIQUIDS W/SAWDUST OR RAGS & REMOVE. FLUSH
W/WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD BE I/A/W
LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.