Product ID:A865 SMC RESIN
MSDS Date:11/22/1991
FSC:6850
NIIN:00F035887
MSDS Number: BTPDC

FIBRE GLASS EVERCOAT CO INC

6600 CORNELL RD
CINCINNATI, OH 45242-2033
US

Emergency Phone: 800-729-7600

Info Phone: 800-729-7600

Preparer: JEFF ZYCH

Cage: 7A609

FIBRE GLASS-EVERCOAT CO INC

CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

STYRENE, (MONOMER), SUSPECTED ANIMAL CARCINOGEN BY IARC,

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 35.84%

ACGIH TLV: 213 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POLYESTER RESIN

CAS: 68797-54-6

Fraction By Weight: 55%

METHYL METHACRYLATE, (MONOMER)

CAS: 80-62-6

RTECS: 9999999VO

Fraction By Weight: NONE

OSHA PEL 410 MG/CUM

ACGIH TLV: 410 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPORS MAY CAUSE NOSE,
THROAT & RESPIRATORY TRACT IRRITATION. REPEATED HIGH CONCENTRATION
EXPOSURE MAY CAUSE LIVER & KIDNEY DAMAGE. SKIN: PROLONGED/FREQUENT
CONTACT MAY CAUSE IRRITATION/PO SSIBLE DERMATITIS. EYES:
IRRITATION. INGESTION: GI DISTURBANCES.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, DEFATTING,
DRYNESS, TEARING, PAIN, DISCOMFORT
Medical Cond Aggravated by Exposure:LIVER & KIDNEY DISORDERS

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE VICTIM FROM EXPOSURE. IF UNCONSCIOUS, GIVE
CPR/OXYGEN AS NEEDED. INGESTION: DON'T INDUCE VOMITING. ASPIRATION
HAZARD. OBT AIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:CC
Flash Point:49F
Lower Limits:1.1
Upper Limits:12.5
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:POLYMERIZATION MAY TAKE PLACE AT ELEVATED
TEMP SUCH AS IN A FIRE, IF CONTAINED, VIOLENT RUPTURE MAY RESULT.

Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB W/ABSORBENT
MATERIAL SUCH AS VERMICULITE/SAND. SMALL QUANTITIES CAN BE REACTED
W/THE APPROPRIATE HARDNER TO SOLIDIFY.

Handling and Storage Precautions:AVOID STORAGE >100F. STORE ONLY IN
ORIGINAL CONTAINERS.

Respiratory Protection:A CANISTER TYPE RESPIRATOR MUST BE WORN TO
PREVENT INHALATION OF VAPORS/MISTS WHEN TLV/PEL IS EXCEEDED. WEAR A
DUST MASK WHEN SANDING CURED PRODUCT.
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) TO MAINTAIN
EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC/CHEMICAL RESISTANT
Eye Protection:FACE SHIELD/CHEMICAL GOGGLES
Other Protective Equipment:USE OF A BARRIER CREAM SUCH AS GLOVE COAT
WHEN USING THE PRODUCT.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
BOILING POINT (METHYL METHACRYLATE): 214F.

Boiling Pt:B.P. Text:(SEE SUPP)
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:PASTE W/SHARP AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, ELEVATED
TEMPERATURES
Hazardous Decomposition Products:ACRID FUMES
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.