BTQDQ - 009 POLYACETAL
- MSDS: BTQDQ
- Manufacturer: SCIENTIFIC POLYMER PRODUCTS INC
- Product Name: 009 POLYACETAL
- National Stock Number: 9330-00N046025
Product Identification
Product ID:009 POLYACETAL
MSDS Date:03/01/1991
FSC:9330
NIIN:00N046025
MSDS Number: BTQDQ
Responsible Party
ONTARIO, NY 14519
US
Emergency Phone: 716-265-0413
Info Phone: 716-265-0413
Cage: 0MWG0
Contractor
Telephone: 716-265-0413
Cage: 0MWG0
Ingredients
POLYACETAL CONTAINING INGREDIENT 2.
CAS: 9002-81-7
Fraction By Weight: 100%
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
OSHA PEL 0.75 PPM; 2 STEL
ACGIH TLV: 0.3 PPM; C
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL: FORMALDEHYDE IS AN UPPER
RESPIRATORY IRRITANT AND ANIMAL CARCINOGEN. EYE: MECHANICAL
IRRITATION.
Explanation of Carcinogenicity:FORMALDEHYDE: IARC MONOGRAPHS, SUPP, VOL
7, PG 211, 1987; GROUP 2A, NTP 6TH ANNUAL RPT ON CARCINOGENS, 1991:
(SUPP DATA)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
ARTF RESP. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:
WASH AFFECTED ARE A WITH SOAP & WATER FOR AT LEAST 15 MINUTES.
REMOVE DIRTY CLOTHING. INGEST: CALL MD IMMEDIATELY.
Fire Fighting
Extinguishing Media:USE WATER, CARBON MONOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:PROTECTION FROM FUMES OF FORMALDEHYDE. USE
NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:BURNS WITH A COLORLESS FLAME. DUST CLOUD
IGNITION TEMPERATURE 440C.
Accidental Release
Spill Release Procedures:SWEEP UP TO PREVENT SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID PROLONGED HEATING ABOVE MELTING
POINT(178C). DRY STORAGE. KEEP CONTAINERS CLOSED TO PREVENT
CONTAMINATION. OPEN CNTNRS IN WELL-VENTED AREA.
Other Precautions:NOTE: THIS MATERIAL INTENDED FOR LABORATORY USE ONLY.
IT IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.
Exposure Controls
Respiratory Protection:IF NEEDED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLAN OF CARCIN: ANTICIPATED TO BE CARCINOGEN. ANIMAL: NASAL TUMORS:
OSHA REGULATED CARCINOGEN, 29 CFR 1910.1048, 1 JUL 1993. .
Chemical Properties
HCC:T7
Melt/Freeze Pt:M.P/F.P Text:>342F,>172C
Solubility in Water:INSOLUBLE
Appearance and Odor:GRANULES OR POWDER, SLIGHT FORMALDEHYDE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES. STRONG OXIDIZING.
Stability Condition to Avoid:HEATING ABOVE 230C - FORMS FORMALDEHYDE.
Hazardous Decomposition Products:FORMALDEHYDE IS CLASSFIED AS AN ANIMAL
CARCINOGEN BY NTP.
Disposal
Waste Disposal Methods:INCINERATION OR LANDFILL IN COMPLIANCE WITH
FEDERAL, STATE & LOCAL REGULATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.