BTQMM - CAN DO HEAVY DUTY ENAMEL, 300 E
- MSDS: BTQMM
- Manufacturer: COWMAN CAMPBELL PAINT CO
- Product Name: CAN DO HEAVY DUTY ENAMEL, 300 E
- National Stock Number: 8010-00N046399
Product Identification
Product ID:CAN DO HEAVY DUTY ENAMEL, 300 E
MSDS Date:05/01/1986
FSC:8010
NIIN:00N046399
MSDS Number: BTQMM
Responsible Party
SEATTLE, WA 98107
US
Emergency Phone: 206-783-8835
Info Phone: 206-783-8835
Cage: HO230
Contractor
Cage: HO230
Ingredients
STODDARD SOLVENT; (MINERAL SPIRITS).
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 34-40%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DATA AVAIL FOR SIMILAR MATL INDICATES
THAT THIS MATL IS NOT EXPECTED TO BE ACUTELY TOXIC. SIGNS/SYMPS OF
CNS DEPRESS MAY INCLUDE ONE/MORE OF THE FOLLOWING:HDCH, DIZZ, LOSS
OF APPETITE, WEAKNESS, & LOS S OF COORDINATION. EFFTD PERSONS WILL
EXPERIENCE COMPLETE RECOVERY WHEN REMOVED FROM AREA.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:DO NOT INDUCE VOMITING. CALL MD IMMED. INHAL:MOVE THE
PERSON TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY ARTIFICIAL
RESPIRATION. CALL A MD IMMED. EYES:RINSE WITH WATER FOR AT LEAST 15
MINUTES . SKIN:WASH THOROUGHLY WITH SOAP AND WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:LIQUID EVAP & FORMS VAP (FUMES) WHICH CAN
CATCH FIRE & BURN W/EXPLO VIOLENCE. INVISIBLE VAP SPREADS EASILY &
CAN BE SET ON FIRE BY MANY SOURCES SUCH AS (SUPDAT)
Accidental Release
Spill Release Procedures:CLEAN UP SPILLS AS SOON AS POSSIBLE. ABSORB LG
SPILLS WITH ABSORBENT CLAY, DIATOMACEOUS EARTH, OR OTHER SUITABLE
MATL. A FIRE OR VAPOR HAZ MAY EXIST SINCE THESE CLEANUP MATERIALS
WILL ONLY ABSORB LIQU ID THEY WILL NOT ABSORB VAPOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE OR USE NEAR FLAME,
SPARKS, OR HOT SURFACES. USE ONLY IN WELL-VENTILATED AREA.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:WEAR AN NIOSH/MSHA APPRVD RESPIR PROT SUCH AS
ORG VAP CARTRIDGE RESPIR/AIR-SUPPLYING RESPIR UNLESS VENT EQUIP IS
ADEQUATE TO KEEP AIRBORNE CONCENTRATIONS BELOW THE EXPOS STANDARD.
Ventilation:LOCAL EXHAUST:PROVIDE VOLUME TO PREVENT VAPOR CONCENTRATION
IN EXCESS OF TLV.
Protective Gloves:NEOPRENE OR RUBBER GLOVES
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH FACILITIES SHOULD BE
ACCESSIBLE IN THE WORK AREA. SOLVENT RESISTANT CLOTHING IF NEEDED
TO (SUPP)
Work Hygienic Practices:INDIVIDUALS WORKING W/THIS MATL SHOULD WASH
HANDS THORO BEFORE EATING, DRINKING, SMOKING/USING TOILET
FACILITIES.
Supplemental Safety and Health
VP:5MM HG @77F. EXPLO HAZ:PILOT LIGHTS, WELDING EQUIP, & ELECTRICAL
MOTORS & SWITCHES. FIRE HAZ IS GREATER AS LIQUID TEMPERATURE RISES
ABOVE 85F. OTHER PROT EQUIP:AVOID SKIN CONTACT.
Chemical Properties
Boiling Pt:B.P. Text:>314F,>157C
Vapor Pres:SUPP DATA
Vapor Density:4.9
Spec Gravity:1.(H*20=1)
Evaporation Rate & Reference:0.13 (BUAC=1)
Appearance and Odor:OPAQUE LIQUID, PETROLEUM DISTILLATE ODOR.
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON DIOXIDE
AND WATER VAPOR; INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF MATL IN APPROVED LOCAL, FED, OR STATE
FACILITY FOR HANDLING HAZ WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.