BTRBR - TANSPRENE 113M - NEOPRENE GLUE
- MSDS: BTRBR
- Manufacturer: ZODIAC OF NORTH AMERICA INC
- Product Name: TANSPRENE 113M - NEOPRENE GLUE
- National Stock Number: 2090-01-347-8571
Product Identification
Product ID:TANSPRENE 113M - NEOPRENE GLUE
MSDS Date:01/01/1994
FSC:2090
NIIN:01-347-8571
MSDS Number: BTRBR
Responsible Party
STEVENSVILLE, MD 21666-9301
US
Emergency Phone: 410-643-4141
Info Phone: 410-643-4141
Cage: 60042
Contractor
Cage: 60042
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 20%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANE (SARA III)
CAS: 110-82-7
RTECS: GU6300000
Fraction By Weight: 30%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM, 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 20%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POLY(CHLOROPRENE)
CAS: 9010-98-4
RTECS: EI9660000
Fraction By Weight: 25%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DERMAL IRRITATION. EFFECTS OF
OVEREXPOSURE ARE NARCOTIC.
Effects of Overexposure:IRRITATING TO SKIN, EYES AND RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:TO BE DRIVEN TO A DOCTOR WHEN
INGESTED.
First Aid
First Aid:ALLOW TO BREATH FRESH AIR. IN CASE OF CONTACT WITH SKIN,
EYES, WASH IMMEDIATELY WITH ABUNDANT WATER.
Fire Fighting
Flash Point Method:CC
Flash Point:1F,-17C
Autoignition Temp:Autoignition Temp Text:UNKNON
Lower Limits:1.1
Upper Limits:12
Extinguishing Media:CARBON DIOXIDE, FOAM, POWDER.
Accidental Release
Spill Release Procedures:KEEP AWAY FROM FIRE. FORBID SPILLING AND
DRIPPING. MOP UP WITH ABSORBING MATERIALS. (SAND, SAW DUST).
RESIDUE MUST BE KEPT IN A TIGHTLY CLOSED DRUM.
Exposure Controls
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health
NONE.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:158F,70C
Vapor Pres:110 MBAR
Vapor Density:3
Spec Gravity:0.86
Evaporation Rate & Reference:500
Appearance and Odor:CLEAR SANDY - SOLVENT SMELLING.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:OVER HEATING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROGEN CHOLRIDE.
Disposal
Waste Disposal Methods:TO BE INCINERATED IN AN APPROVED CENTER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.