Product ID:LEAD-ACID BATTERY
MSDS Date:09/01/1993
FSC:6140
NIIN:01-324-1958
MSDS Number: BTRRV

YUASA-EXIDE CORP

645 PENN STREET
READING, PA 19612-4205
US

Emergency Phone: 215-378-0500/800-424-9300(CHEMTREC)

Info Phone: 215-378-0798

Cage: KO888

YUASA-EXIDE CORP

READING (FORMALLY IN HORSHAM), PA 19612-4205 US

Telephone: 610-378-0550/ FAX -0616

Cage: KO888

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 60%

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3,DUST;9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG (SB)/M3; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ARSENIC (SARA III)

CAS: 7440-38-2

RTECS: CG0525000

Fraction By Weight: 0.2%

OSHA PEL SEE 1910.1018

ACGIH TLV: 0.01 MG/M3, A1; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

CALCIUM

CAS: 7440-70-2

RTECS: EV8040000

Fraction By Weight: 0.2%

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0.2%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9394

SULFURIC ACID (SARA III) (ELECTROLYTE)

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 10-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

PROPENE POLYMERS (POLYPROPPYLENE)

CAS: 9003-07-4

RTECS: UD1842000

Fraction By Weight: SEE #16%

POLYSTYRENE

CAS: 9003-53-6

Fraction By Weight: SEE #16%

STYRENE ACRYLONITRILE

CAS: 9003-54-7

RTECS: AT6978000

Fraction By Weight: SEE #16%

ACRYLONITRILE BUTADIENE STYRENE

CAS: 9003-56-9

RTECS: AT6970000

Fraction By Weight: SEE #16%

STYRENE BUTADIENE

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: SEE #16%

POLYVINYL CHLORIDE

CAS: 9002-86-2

RTECS: KV0350000

Fraction By Weight: SEE #16%

POLYCARBONATE

Fraction By Weight: SEE #16%

HARD RUBBER

Fraction By Weight: SEE #16%

POLYETHYLENE

CAS: 9002-88-4

RTECS: TQ3325000

Fraction By Weight: SEE #16%

CASE MATERIAL, TOTAL OF INGREDIENTS #7 THRU 15.

Fraction By Weight: 5-10%

SILICON DIOXIDE (GEL BATTERIES ONLY) (SEE INGRED #19)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 10%

OSHA PEL 10 MG/M3 RDUST; Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9394

SHEET MOLDING COMPOUND (GLASS-REINFORCED POLYESTER) (SEE

Fraction By Weight: 10%

OTHER(INORG PB & ELECTROLYTE PRIM CMPNTS OF EVERY BATTERY

RTECS: 9999999ZZ

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:H2SO4:INHAL:SEVER RESP
IRRIT.INGEST:IRRT MOUTH/THROAT/ESOPHAGUS/STOMACH.SKIN/EYE:SEVE
IRRIT,BURNS,ULCERATION,BURNS,CORNEA DAMAGE,BLINDNESS.PB
CMPDS:INHAL:IRRT UPPER RESP TRACT & LUNGS.INGEST:SYS TOXIC
ITY.EYE:IRRIT.CHRONIC:TOOTH ENAMEL,INFLAMM OF NOSE/THROAT/BRONCHIAL
TUBES.ANEMIA,NEUROPATHY(MOTOR NERVES)KID/REPROD DAMA
Explanation of Carcinogenicity:PER MSDS:H2SO4 MIST FROM MISUSE OF
PRODUCT. LEAD CMPDS. ARSENIC.
Effects of Overexposure:SKIN IRRIT, DAMAGE TO CORNEA, UPPER RESP IRRIT.
SYMPTOMS OF TOXICITY OF LEAD CMPDS WHEN PRODUCT HEATED, OXIDIZED OR
OTHERWISE PROCESSED OR DAMAGED TO CREATE DUST/VAPOR/FUME:HEADACHE,
FATIGUE, ABDOMINA L PAIN, LOSS OF APPETITE, MUSCULAR ACHES&
WEAKNESS, SLEEP DISTURBANCES & IRRITABILITY.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO H2SO4 MIST MAY
CAUSE LUNG DAM,AGGRAVATE PULM CONDITIONS.H2SO4 CONTACT W/SKIN MAY
AGGRAVATE SKIN DISEASES(ECZEMA & CONTACT DERM).PB & CMPDS CAN
AGGRAVATE SOME FORMS OF KID/LIV/NEURO DIS

First Aid:INHAL:ACID:REMOVE TO FRESH AIR IMMED. IF BREATH DIFFI GIVE
OXY.PB:GARGLE,WASH NOSE/LIPS.CALL DR.INGEST:ACID:GIVE LG QUANTITIES
OF H2O.DON'T INDUCE VOMIT.CALL DR.SKIN:ACID:FLUSH W/LOTS AMTS OF
H2O FOR @ LEAST 15MINS.REMOVE CONTAMIN CLOTH/SHOE.PB:WASH IMMED
W/SOAP & WATER.EYE:ACID/PB:FLUSH IMMED W/LG AMTS OF H2O FOR @ LEAST
15MINS.SEE DR.

Lower Limits:4.1 H2 GAS
Upper Limits:74.2
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:IF BATTERIES ARE ON CHARGE, SHUT OFF POWER.
USE + PRES SCBA. WATER APPLIED TO ELECTROLYTE GENERATES HEAT &
CASUES IT TO SPATTER. WEAR ACID-RESISTANT CLOTHING.
Unusual Fire/Explosion Hazard:HIGHLY FLAMM H2 GAS GENERATED DURING
CHARG/OPER OF BATTERY.KEEP SPARKS OR OTHER SOURCES OF IGN
AWAY.DON'T ALLOW METALLIC MATLS TO CONTACT -/+ TERMINALS.

Spill Release Procedures:STOP FLOW.CONTAIN/ABSORB SM SPILLS W/DRY
SAND,EARTH,VERMI.DON'T USE COMBUST MATLS.CAREFULLY NEUTRALIZE
ELECTROLYTE W/SODA ASH,SODIUM BICARBONATE,LIME,ETC.WEAR
ACID-RESISTANT CLOTH,BOOT,GLOV,FACESHIELD .DON'T ALLOW DISCHARGE OF
UNTREATED ACIDTO SEWER.
Neutralizing Agent:SODA ASH, SODIUM BICARBONATE, LIME.

Handling and Storage Precautions:STORE BATTERIES IN COOL,DRY,WELL-VENTI
AREAS W/IMPERVIOU SURFACES & ADEQUATE CONTAINMENT IN EVENT OF
SPILLS.SEPARATE FROM INCOMP MATLS,SPARKS,HEAT,FIR
Other Precautions:BATTERIES SHOULD ALSO BE STORED UNDER ROOF FOR
PROTECTION AGAINST ADVERSE WEATHER CONDITIONS.STORE & HANDLE ONLY
IN AREAS W/ADEQUATE H2O SUPPLY & SPILL CONTROL.AVOID DAMAGE TO
CONTAINERS.FOLLOW MFG'S INSTRUCTIONS FOR INSTALLATION & SERVICE.

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITONS. WHEN
CONCENTRATION OF H2SO4 MIST ARE KNOWN TO EXCEED PEL USE NIOSH OR
MSHA APPROVED RESPIRATORY PROTECTION.
Ventilation:STORE & HANDLE IN WELL-VENTILATED AREA. IF MECHANICAL
VENTILATION IS USED COMPONENTS MUST BE ACID-RESISTANT.
Protective Gloves:RUB,PLASTIC ACID RESISTANT W/ELBOW LENGT
Eye Protection:CHEMNICAL GOGGLES OR FACE SHIELD.
Other Protective Equipment:ACID-RESIS APRON.UNDER SEVERE EXPOSURE OR
EMERG CONDITIONS WEAR ACID-RESIS CLOTH/BOOTS.EYEWASH & SHOWERS
W/UNLIM H2O SUP
Work Hygienic Practices:HANDLE CAUTIOUSLY TO AVID SPILLS.MAKE CERTAIN
VENT CAPS ON SECURLEY.AVOID CONTACT W/INTERNAL COMPONENTS.
Supplemental Safety and Health
CONSULT STATE ENVIRONEMNTAL AGENCY &/OR FED EPA FOR DISPOSAL. WEAR
PROTECTIVE CLOTHING WHEN FILLING OR HANDLING BATTERIES.

HCC:C1
Boiling Pt:B.P. Text:203F,95C
Vapor Pres:10
Vapor Density:>1
Spec Gravity:1.215-1.350
Evaporation Rate & Reference:<1, BUAC=1
Solubility in Water:COMPLETE, ELECTROLYT
Appearance and Odor:ARTICLE;NO APPARENT ODOR.ELECTROLYTE:CLEAR LIQ
W/SHARP,PENETRATING PUNGENT ODOR

Stability Indicator/Materials to Avoid:YES
STRG REDUCING AGENTS;METALS(SO2,H2);SO3;STRG OXIDIZERS;H2O;STR
ACIDS,BASES,HALIDES,HALOGENATES,KNO3,NASCENT H,PERM PEROX
Stability Condition to Avoid:PROLONGED OVERCHARGE, SOURCES OF IGNITION.
Hazardous Decomposition Products:SO3,CO,H2SO4 MIST,SO2,H2.TOXIC METAL
FUME/VAPOR/DUST.ARSINE GAS FROM CONTACT W/STRONG OR BASE OR
PRESENCE OF NASCENT H2.

Waste Disposal Methods:SEND SPENT BATTERIES TO SECONDARY LEAD SMELTER
FOR RECYCLING.NEUTRALIZED SLURRY INTO SEALED CONTAINERS & DISPOSE
OF AS HAZ WASTE AS APPLICABLE.LG H2O-DILUTED SPILLS AFT
NEUTRALIZATION & TESTING SHOULD BE MANAGED IAW APPROVED
LOC/STA/FED REQMTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.