Product ID:STOODY 104
MSDS Date:06/06/1991
FSC:3439
NIIN:01-014-0846
MSDS Number: BTRWK

STOODY CO

5557 NASHVILLE RD
BOWLING GREEN, KY 42101-7546
US

Emergency Phone: 502-781-9777

Info Phone: 502-781-9777

Cage: 57965

STOODY CO

90032 BOWLING GREEN, KY 42102-9032 US

Telephone: 502-781-9777

Cage: 57965

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0-5%

OSHA PEL C 5 MG/M3

ACGIH TLV: 5 MG/M3, DUST; 9394

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0-2%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

MOLYBDENUM COMPOUND

CAS: 7439-98-7

Fraction By Weight: 0-6%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0-2%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 60-95%

OSHA PEL 5 MG/M3

ACGIH TLV: 10 MG/M3 AS FE2O3

BORON

CAS: 7440-42-8

RTECS: ED7350000

Fraction By Weight: 0-4.5%

OSHA PEL 15 MG/M3 (AS OXIDE)

ACGIH TLV: 10 MG/M3 (AS OXIDE)

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT. CHRONIC: OVEREXPOSURE TO WELDING FUMES
CAN LEAD TO SIDEROSIS (IRON DEPOSITS IN THE LUNG) AND AFFECT
PULMONARY FUNCTION. ARC RAYS CAN INJU RE & BURN SKIN. HEAT RAYSCAN
INJURE EYES. ELECTRIC SHOCK CAN KILL. NOISE CAN DAMAGE HEARING.
Explanation of Carcinogenicity:CHROMIUN AND NICKEL AND THEIR COMPONENTS
ARE ON THE IARC & NTP LIST AS POSING A CARCINOGENIC RISK TO HUMANS.
Effects of Overexposure:OVEREXPOSURE TO FUMES MAY RESULT IN DIZZINESS,
NAUSEA OR DRYNESS OR IRRITATION OF NOSE, THROAT OR EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS.

Flash Point:NONFLAMMABLE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:WELING ARC & SPARKS CAN IGNITE
COMBUSTIBLES & FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARD
Z49.1 FOR FIRE PREVENTION DURING USE OF WELDING & PROCEDURES.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:READ AND UNDERSTAND THE MANUFACTURERS INSTRUCTIONS
AND THE PRECAUTIONARY LABEL ON THE PRODUCT.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURES BELOW TLV.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC, OR BOTH,
TO KEEP THE FUMES & GASES BELOW TLV'S IN THE WORKERS AIR ZONE
Protective Gloves:WELDERS' GLOVES.
Eye Protection:WEAR HELMET OR USE FACE SHIELD WITH LEN.
Other Protective Equipment:WEAR HEAD, HAND AND BODY PROTECTION WHICH
HELP TO PREVENT INJURY FROM RADIATION, SPARKS, AND ELECTRICAL
SHOCK.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WELDING FUMES CANNOT BE CLASSIFIED SIMPLY. THE COMPOSITION AND QUANTITY
OF BOTH ARE DEPENDENT UPON THE METAL BEING USED, THE PROCESS,
PROCEDURES AND ELECTRODES USED.

HCC:N1

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED FUME CONSTITUENTS
WOULD INCLUDE: PRIMARILY COMPLEX OXIDES OF IRON; SECONDARY COMPLEX
OXIDES OF CHROM

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AN D LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.