BTSDX - SODIUM PEROXIDE
- MSDS: BTSDX
- Manufacturer: MALLINCKRODT INC
- Product Name: SODIUM PEROXIDE
- National Stock Number: 6810-00-241-1159
Product Identification
Product ID:SODIUM PEROXIDE
MSDS Date:08/30/1985
FSC:6810
NIIN:00-241-1159
MSDS Number: BTSDX
Responsible Party
ST. LOUIS, MO 63134
US
Emergency Phone: 314-539-1600
Info Phone: 314-539-1600
Cage: 37940
Contractor
Telephone: 908-859-2151
Cage: 62910
Ingredients
SODIUM PEROXIDE
CAS: 1313-60-6
RTECS: WD3450000
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) WAS NOT FOUND
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALED:MAY BE CORROSIVE TO
RESPIRATORY TRACT. INGESTED:CORROSIVE. MAY CAUSE BURNS IN MOUTH,
ESOPHAGAS AND G/I TRACT. SKIN:CORROSIVE EYE:CORROSIVE CHRONIC:NO
INFORMATION FOUND.
Explanation of Carcinogenicity:THIS CHEMICAL IS NOT CONSIDERED TO BE
CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:INHALED:SYMPTOMS MAY INCLUDE SORE THROAT,
SHORTNESS OF BREATH, LABORED BREATHING, COUGHING.
INGESTED:VOMITING, DIARRHEA, GASTRITIS MAY OCCUR. SKIN:MAY CAUSE
REDNESS, PAIN, SERIOUS SKIN BURNS. EYE:MA Y CAUSE REDNESS, PAIN,
BLURRED VISION AND DAMAGE FROM CORROSIVE EFFECTS.
Medical Cond Aggravated by Exposure:NO INFORMATION FOUND.
First Aid
First Aid:GET IMMEDIATE MEDICAL ATTENTION WHERE ANY SYMPTOMS OCCUR.
EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WIPE OFF THEN WASH
WITH SOAP & WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. IN HALED:REMOVE TO FRESH AIR. AID/RESTORE BREATHING IF
NECESSARY. INGESTED:DO NOT INDUCE VOMITING. GIVE LARGE QUANTITYS OF
MILK OR WATER & GET IMMEDIATE MEDICAL CARE. NOTHING BY MOUTH IF
UNCONSCIOUS.
Fire Fighting
Flash Point:STRONG OXIDIZER
Extinguishing Media:DRY CHEMICAL **DO NOT USE CARBON DIOXIDE**
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA
W/FULL FACEPIECE OPERATED IN PRESSURE DEMAND MODE & FULL PROTECTIVE
EQUIPMENT WHEN FIGHTING FIRE.
Unusual Fire/Explosion Hazard:CONTACT WITH COMBUSTIBLE, ORGANIC OR
OXIDIZABLE SUBSTANCES MAY CAUSE EXTREMELY VIOLENT REACTION. MAY
REACT EXPLOSIVELY IN CONTACT WITH LARGE QUANTITY OF WATER.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE CLOTHING. DO NOT SAVE FOR
RECLAIMATION. COVER WITH 2 TIMES AMOUNT OF 90%SAND/10%SODA ASH. MIX
THOROUGHLY. TRANSFER TO A CLOSED METAL CONTAINER. ALTERNATE:SLOWLY
& W/STIRRING, USING PL ASTIC SCOOP, ADD MIXTURE TO AN EXCESS OF
WATER.
Neutralizing Agent:90%SAND / 10% SODA ASH FOR ALTERNATE
PROCEDURE:SULFURIC ACID. (CAUTION!)
Handling
Handling and Storage Precautions:KEEP IN TIGHTLY COSED CONTAINER,
STORED IN A COOL, DRY, VENBTILATED AREA. PROTECT FROM MOISTURE.
SEPARATE FROM COMBUSTIBLE OR EASILY OXIDIZED MATERIAL
Other Precautions:DO NOT GET IN EYS,ON SKIN OR CLOTHING. AVOID
BREATHING DUST. KEEP CONTAINER CLOSED. USE W/ADEQUATE VENTILATION.
KEEP FROM CONTACT W/CLOTHING OR OTHER COMBUSTIBLES. WASH THOROUGHLY
AFTER HANDLING. PROM PTLY REMOVE & WASH CONTAMINATED CLOTHING
Exposure Controls
Respiratory Protection:(NIOSH APPROVED) FOR CONDITIONS OF USE WHERE
EXPOSURE TO DUST IS APPARENT, A DUST/MIST RESPIRATOR MAY BE WORN.
FOR EMERGENCIES, A SELF-CONTAINED BREATHING APPARATUS MAY BE
NECESSARY.
Ventilation:A LOCAL EXHAUST WHICH CAPTURES THE CONTAMINANT AT ITS
SOURCE IS RECOMMENDED TO PREVENT ITS DISPERSION INTO WORKROOM AIR.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SAFETY GOGGLES / FULL FACE SHIELD
Other Protective Equipment:IMPERVIOUS CLOTHING INCLUDING BOOTS, GLOVES,
LAB COAT,APRON, OR COVERALLS TO PREVENT SKIN CONTACT. NO CONTACT
LENSES.
Work Hygienic Practices:MFR: ? HMIS:USE STRICT CHEMICAL HYGIENE
PRACTICE. AVOID UNNECESSARY EXPOSURE. WASH THOROUGHLY BEFORE EATING
OR DRINKING.
Supplemental Safety and Health
MSDS RECEIVED FROM NAVY (FOCAL POINT N). NSN IDENTIFIED BY THEM.
Chemical Properties
HCC:D1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:1215F,657C
Melt/Freeze Pt:M.P/F.P Text:860F,460C
Spec Gravity:2.81
Solubility in Water:REACTS VIOLENTLY
Appearance and Odor:WHITE TO PALE YELLOW GRANULES
Stability
Stability Indicator/Materials to Avoid:YES
WATER REACTIVE. MFR ALSO LIST NUMEROUS EASILY OXIDIZABLE SUBSTANCES
SUCH AS ORGAINC COMPOUNDS, REACTIVE METALS, ETC.
Stability Condition to Avoid:STABLE UNDER ORDINARY CONDITIONS OF USE
AND STORAGE.
Hazardous Decomposition Products:EMITS OXYGEN WHEN HEATED TO
DECOMPOSITION WHICH MAY INCREAS A FIRE HAZARD.
Conditions to Avoid Polymerization:THIS SUBSTANCE DOES NOT POLYMERIZE.
Disposal
Waste Disposal Methods:SEND TO RCRA-APPROVED WASTE DISPOSAL FACILITY.
FOR ALTERNATE PROCEDURE:NEUTRALIZE W/SULFURIC ACID, DECANT SOLUTION
TO DRAIN W/EXCESS WATER. SEND SOLIDS TO WASTE FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.