Product ID:AMBERLITE IRA-410 RESIN
MSDS Date:01/04/1989
FSC:8010
NIIN:00-937-4087
MSDS Number: BTSXQ

Emergency Phone: 215-502-2000/CHEMTREC 800-424-9300

Info Phone: 215-502-2000/CHEMTREC 800-424-9300

Cage: 77902

Telephone: 215-592-2521/215-592-3000

Cage: 77902

STYRENE/DIVINYLBENZENE ANION EXCHANGE RESIN

Fraction By Weight: 40-55%

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45-60%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT-PRODUCT CAN CAUSE EYE
IRRITATION.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE CONTACT: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. CONSULT A PHYSICIAN IF IRRITATION PERSISTS.

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS, WATER SPRAY.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
(PRESSURE-DEMAND, MSHA/NIOSH-APPROVED OR EQUIVALENT) AND FULL
PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:TOXIC COMBUSTION PRODUCTS INCLUDE
HYDROGEN CHLORIDE AND OXIDES OF NITROGEN.

Spill Release Procedures:FLOOR MAY BE SLIPPERY. USE CARE TO AVOID
FALLS. SWEEP UP AND TRANSFER TO CONTAINERS FOR RECOVERY OR
DISPOSAL.

Handling and Storage Precautions:STORE AT AMBIENT TEMPERATURES. AVOID
REPEATED FREEZE-THAW CYCLES. STORAGE TEMPERATURE:MAX. 60C/140F.
MIN. 0C/32F.
Other Precautions:NOTE: THE MAXIMUM OPERATING TEMPERATURE RECOMMENDED
FOR THIS PRODUCT IS 77C/170F BECAUSE FUNCTIONAL GROUP DESTRUCTION
AND LOSS OF CAPACITY WILL OCCUR.

Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:NONE REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH FACILITY
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CAUTION: DO NOT PACK WITH DRY ION EXCHANGE RESIN. DRY BEADS EXPAND WHEN
WETTED; THIS EXPANSION CAN CAUSE A GLASS COLUMN TO SHATTER.
CAUTION: NITRIC ACID AND OTHER STRONG OXIDIZING AGENTS CAN CAUSE
EXP LOSIVE REACTIONS WHEN MIXED WITH ION EXCHANGE RESIN.

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Decomp Temp:Decomp Text:NA
Vapor Pres:17
Vapor Density:<1
Spec Gravity:1.05-1.15
pH:5-9
Viscosity:NA
Evaporation Rate & Reference:LESS THAN 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BEADS.
Percent Volatiles by Volume:45-60

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AT ALL TIMES.
Stability Condition to Avoid:TEMPERATURES OVER 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
STYRENE MONOMER AND DIVINYLBENZENE, HYDROGEN CHLORIDE AND NITROGEN.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPIATE DISPOSAL METH OD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.