Product ID:"B" COMPONENTS FOR FOAM KIT (URETHANE RESIN)
MSDS Date:04/01/1989
FSC:9330
NIIN:01-075-0324
Kit Part:Y
MSDS Number: BTSZF

SOBEK D CO

6000 STEVENSON BLVD
FREMONT, CA 94538
US

Emergency Phone: 415-657-7633

Info Phone: 415-657-7633

Cage: 5U322

SOBEK D CO

FREMONT, CA 94538 US

Telephone: 415-657-7633

Cage: 5U322

POLYOL

Fraction By Weight: <90%

SILICONE SURFACTANT

Fraction By Weight: <2%

CATALYST

Fraction By Weight: <10%

TRICHLOROFLUOROMETHANE (CFC-11) (SARA III) (R-11)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: <

OSHA PEL 1000 PPM

ACGIH TLV: C 1000 PPM; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:HAS NOT BEEN ESTABLISHED.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MIXTURE HAS NOT BEEN TESTED FOR HEALTH
HAZ.IT'S ASSUMED BY OSHA THAT UNTESTED MIXTURE PRESENTS SAME HEALTH
HAZ AS DO COMPONENETS WHICH ARE PRESENT 1% OR GREATER. EYE:IRRIT.
SKIN:MILD TO SEVERE IRRIT. INHAL:HI CONCEN MAY CAUSE ASPHYXIATION
DUE TO OXY DEPRIVATION. INGEST:IRRIT TO MUCOUS MEMBRANE.
Explanation of Carcinogenicity:PER MSDS THE COMPONENTS OF THIS MIXTURE
ARE NOT CLASSIFIED AS CARCINOGENIC BY IARC, NTP OR OSHA.
Effects of Overexposure:IRRITANT TO EYE, SKIN, MUCOUS MEMBRANE.
Medical Cond Aggravated by Exposure:PEOPLE WITH CARDIAC ARRHYTHMIA MAY
BE AT INCREASED RISK IN SEVERE EXPOSURE.

First Aid:EYE:FLUSH W/WATER 15MINS. GET MED ATTN. SKIN:REMOVE
CONTAMINATED CLOTH. WASH WELL W/SOAP & WATER. INHAL:MOVE TO AREA
FREE OF EXPOUSRE. GIVE OXY OR ARTIF RESP AS NEEDED. GET MED ATTN.
INGEST:IMMED DILU TE BY GIVING 1-2 GLASSES OF WATER. INDUCE VOMIT
BY TOUCHING BACK OF TONGUE. GET MED ATTN.

Flash Point:NON-FLAMMABLE
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:FIREFIGHTERS SHULD WEAR SELF-CONTAINED
BREATHING APPARATUS & PROTECTIVE CLOTHING (RUBBER COAT, BOOTS,
GLOVES, HELMET, ETC).
Unusual Fire/Explosion Hazard:DURING A FIRE, FLUOROCARBON VAPORS &
OTHER DECOMPOSITION PRODUCTS THAT ARE HIGHLY TOXIC CAN BE
GENERATED.

Spill Release Procedures:PROVIDE VENTILATION. ABSORB "B" COMPONENT
SPILL W/SAWDUST, VERMICULITE OR OTHER SUITABLE MEANS & COLLECT IN
WASTE CONTAINERS. WASH REMAINING RESIUDE FROM SURFACE W/SOAP &
WATER.
Neutralizing Agent:NONE SPECIFIED BY MFG.

Handling and Storage Precautions:EDUCATE/TRAIN WORKERS IN SAFE USE OF
MATL.READ ALL PACKAGE DIRECTIONS.PROTECT CANS FROM PHYSICAL
ABUSE.AVOID SMOKING,OPEN FLAMES IN AREA DURING FOAMIN
Other Precautions:FOR LONGEST SELF-LIFE AVOID STORAGE ABAOVE 90F. SHORT
TERM STORAGE BETWEEN 40-60F WILL NOT HARM THE MATERIAL. IDEAL
STORAGE IS 60-90F. STORAGE @ LESS THAN 40F MAY CAUSE LIQUIDS IN
CONTAINER TO SEPARAT E THEREBY PRODUCING LOWER QUALITY FOAM.

Respiratory Protection:NONE SPECIFIED BY MFG. USE APPROPRIATE
RESPIRATORY PROTECTION FOR SPECIFIC WORKING CONDITIONS THAT
WARRANT.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:CHEM RESISTANT RUBBER OR PLASTIC GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:LONG SLEEVE WORK CLOTHES.
Work Hygienic Practices:READ & UNDERSTAND ALL DIRECTIONS PROVIDED ON
KIT PACKAGING & INCLUDED BULLETINS. DO NOT SMOKE. WASH CONTAMIN
CLOTH.
Supplemental Safety and Health
BOILING PT:R11 PRESENT AS LIQUIFIED GAS & @ 1 STM BOILS @ 74.9F. WHEN
FLUOROCARBONS ARE INHALED THROUGH A LIGHTED CIGARETTE, TOXIC
PRODUCTS ARE GENERATED. KIT CONSISTS OF 1-4OZ BTL OF 107G OF
ISOCYANA TE (PNIND:A) & 1-8OZ BTL OF 100G OF POLYOL/CATALYST
(PNIND:B).

HCC:N1
Boiling Pt:B.P. Text:SEE SUPPLEM
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:PARTLY SOLUBLE.
Appearance and Odor:BROWN TO YELLOW, MILD FLUOROCARBON ODOR.
Percent Volatiles by Volume:<25

ALKALI OR ALKALINE EARTH METALS-POWDERED AL, ZN, BE,ETC; ACIDS, BASES,
OXIDIZING AGENTS & CATALYSTS (ALCL3, FECL3).
Stability Condition to Avoid:NONE SPECIFIED BY MFG. HOWEVER AVOID OPEN
FLAMES & SEE STORAGE INFO IN OTHER PRECAUTIONS SECTION.
Hazardous Decomposition Products:DECOMPOSED BY HI TEMP FORMING
HYDROCHLORIC & HYDROFLUORIC ACIDS, CARBONYL HALIDES.ORG MATLS
PYROLIZE TO HAZ GAS/MIST/FUM
Conditions to Avoid Polymerization:HAZ POLYMERIZATION DOES NOT OCCUR
UNLESS REACTED WITH "A" COMPONENT BY A NONSTANDARD METHOD.

Waste Disposal Methods:INVERT EACH CAN SEPARATELY & DISPENSE BOTH "A" &
"B" COMPONENT DIRECTLY INTO PLASTIC LINED WASTE CONTAINER. IMMED
MIX WASTE MATL TO FORM SOLID PLASTIC WASTE. DISPOSE OF THIS PRODUCT
AS YOU WOULD OTHER PLASTIC WASTE IAW FED/STATE/LOCAL ENVIRO REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.