Product ID:NORLINE ALKYD WHITE TRAFFIC PAINT
MSDS Date:03/09/1991
FSC:8010
NIIN:01-306-9143
MSDS Number: BTTCD

MORTON INTL INC SPECIALTY CHEMICALS GROUP

333 W WACKER DR
CHICAGO, IL 60606-1218
US

Emergency Phone: 312-807-2000, CHEMTREC 800-424-9300

Info Phone: 312-807-2000

Cage: 32063

MORTON INTL INC SPECIALTY CHEMICALS GROUP

CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

NAPHTHA PETROLEUM HIGH FLASH

CAS: 8030-30-6

RTECS: VL8047000

Fraction By Weight: 10%

OSHA PEL 100 PPM;

ACGIH TLV: 100 PPM 8990

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 4%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 5-20%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPYLENE OXIDE (SARA III)

CAS: 75-56-9

RTECS: TZ2975000

Fraction By Weight: ).12%

OSHA PEL 100 PPM

ACGIH TLV: 20 PPM; 9394

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE AND SKIN IRRITATION.
BREATHING OF VAPORS MAY IRRITATE RESPIRATORY TRACT, CNS DEPRESSION.
INGESTION:GI DISTRESS. CHRONIC:BRAIN AND NERVOUS SYSTEM DEPRESSION,
LIVER AND KIDNEY DAMAGE.
Explanation of Carcinogenicity:PROPYLENE OXIDE IS LISTED BY IARC AND
NTP AS A PROBABLE/ANTICIPATED CARCINOGEN.
Effects of Overexposure:EYE, SKIN & RESPIRATORY TRACT IRRITATION,
HEADACHE, NAUSEA AND DIZZINESS, CONFUSION, UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN, OR
RESPIRATORY TRACT MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
TREAT SYMPTOMATICALLY. EYES:IMMEDIATELY FLUSH WITH WATER FOR 15
MINUTES HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN:REMOVE
CONTAMINA TED CLOTHING. WASH WITH SOAP AND WATER.IF IRRITATION
PERSISTS, GET MEDICAL ADVICE. INGESTION:DO NOT INDUCE VOMITING.
GIVE 1 OR 2 GLASSES OF WATER IF CONSCIOUS. GET IMMEDIATE MEDICAL
HELP.

Flash Point Method:TCC
Flash Point:23.0F,-5.0C
Lower Limits:1%
Upper Limits:37%
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. WEAR
APPROPRIATE PERSONAL PROTECTION EQUIPMENT AND APPROVED RESPIRATOR.
CONTAIN SPILL WITH ABSORBENT MATERIAL AND PUT INTO CONTAINERS.
PREVENT MATERIAL FROM CONTAMINATI NG ANY WATER SOURCES OR STORM
SEWERS.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE IN A COOL, WELL VENTILATED AREA,
AWAY FROM OPEN FLAMES AND SOURCES OF IGNITION. STORE BELOW 120F.
GROUND CONTAINERS WHEN POURING.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT BREATHE MIST. AVOID
PROLONGED OR REPEATED BREATHING OF VAPOR. AVOID CONTACT WITH EYES.
USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING. READ
MANUFACTURER'S SAFETY PRECAUTIONS BEFORE USE.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS TO REMOVE
SOLID AIRBORNE PARTICLES OF OVER SPRAY DURING SPRAY APPLICATIONS.
IN RESTRICTED VENTILATION AREAS USE NIOSH/MSHA APPROVED RESPIRATOR
DESIGNED TO REMOVE BO TH PARTICLES AND VAPOR.
Ventilation:SUFFICIENT VENTILATION IN VOLUME AND PATTERN SHOULD BE
PROVIDED TO KEEP AIR CONTAMINATION BELOW OSHA'S CURRENT PELS.
Protective Gloves:IMPERVIOUS NATURAL RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT BY USING
CLEAN WORK CLOTHING, INCLUDING A HAT.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOM FACILITIES. DO NOT WEAR CONTAMINATED CLOTHING OR FOOTWEAR.
Supplemental Safety and Health
GROUND CONTAINERS WHEN POURING LIQUIDS AND POWDERS TO AVOID STATIC
CHARGE BUILD UP. DO NOT HANDLE UNTIL MANUFACTURES SAFETY
PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD. PROVIDE ADEQUATE
VENTILATION OR R ESPIRATORY PROTECTION TO REMOVE DECOMPOSITION
PRODUCTS DURING WELDING OR FLAME CUTTING COATED SURFACES.

HCC:F3
Boiling Pt:B.P. Text:93.0F,33.9C
Vapor Density:>1
Spec Gravity:1.5
Evaporation Rate & Reference:<1 (ETHER =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID, HYDROCARBON ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALKALIS, NA, K, REACTIVE METALS, NITROGEN
MONOXIDE.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON
DIOXIDE,HYDROGEN CHLORIDE, PHOSGENE, CHLORINE AND OXIDES OF HEAVY
METALS.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.