Product ID:1104/0180,BELZONA 1111 (SUPER METAL) SOLIDIFIER,PART B
MSDS Date:07/14/1994
FSC:4921
NIIN:01-367-3618
Kit Part:Y
MSDS Number: BTTWM

BELZONA INC

2000 N.W. 88 COURT
MIAMI, FL 33172
US

Emergency Phone: 305-594-4994,800-424-9300(CHEMTREC)

Info Phone: 305-594-4994

Preparer: W.FAUPEL

Cage: 67020

BELZONA INC.

MIAMI, FL 33172 US

Telephone: 305-594-4994

Cage: 67020

DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 10-30%

OSHA PEL 1 PPM

ACGIH TLV: 1 PPM, S 9394

TALC

CAS: 14807-96-6

RTECS: WW2700000

Fraction By Weight: 40-70%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST 9394

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 9394

PHENOL (SARA III)

CAS: 108-95-2

RTECS: SJ3327000

Fraction By Weight: 1-5%

OSHA PEL 5 PPM, S

ACGIH TLV: 5 PPM, S 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TRISDIMETHYLAMINO-METHYL PHENOL

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 1-5%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE MATERIAL. ACUTE: CAUSES
BURNS TO SKIN AND EYES. CHRONIC: CHEMICAL BURNS AND SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION, BURNS. SKIN: IRRITATION,
BURNS, SENSITIZATION.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS.

First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER. IF
IRRITATION PERSISTS, GET MEDICAL ATTENTION. SKIN: REMOVE
CONTAMINATED CLOTHING. REMOVE EXCESS MATERIAL. WASH SKIN WITH SOAP
AND WATER. IF IRRITA TION PERSISTS, GET MEDICAL ATTENTION.
INHALATION: MOVE TO FRESH AIR. GET MEDICAL ATTENTION. INGESTION: DO
NOT INDUCE VOMITING.RINSE MOUTH WITH WATER.DRINK LARGE AMOUNTS OF
WATER.GET MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:>212F,>100C
Extinguishing Media:WATER FOG (NOT A DIRECT STREAM OF WATER), FOAM,
CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING AND USE NIOSH/MSHA
APPROVED SCBA. FULL BUNKER GEAR SHOULD BE WORN IN EXTREME CASES.
USE SAND TO CONTAIN BURNING MATERIAL.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE HAZARDOUS.

Spill Release Procedures:ABSORB WITH INERT MATERIAL (E.G. EARTH OR
SAND). SWEEP UP. PLACE INTO SUITABLE LABELLED CONTAINERS. SEAL AND
DISPOSE OF PROPERLY. FLUSH AREA WITH DETERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATHING VAPORS AND CONTACT
WITH SKIN AND EYES. STORE UNDER COOL, DRY CONDITIONS. EMPTY
CONTAINERS WILL RETAIN RESIDUE AND MAY BE DANGEROUS.
Other Precautions:CHECK ALL CONTAINERS FOR LEAKS AT REGULAR INTERVALS
AND BEFORE USE. WHEN USING, DO NOT EAT, DRINK, OR SMOKE. WASH HANDS
WITH SOAP AND WATER AFTER HANDLING THIS PRODUCT.

Respiratory Protection:IN CONFINED AREAS OR WHERE GOOD
NATURAL/MECHANICAL VENTILATION IS NOT AVAILABLE, LEADING TO RISK OF
EXCEEDING TLV'S, AN APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR
SHOULD BE WORN.
Ventilation:WHERE ADEQUATE NATURAL VENTILATION IS NOT AVAILABLE PROVIDE
SUITABLE LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERMEABLE GLOVES,NEOPRENE,NITRILE,PVC.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:PROVIDE AN EYE WASH STATION AND SAFETY
SHOWER. WEAR SUITABLE PROTECTIVE CLOTHING TO MINIMIZE SKIN CONTACT.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEY 1: C1, THIS ENTRY IS FOR PART B OF A TWO PART KIT. SEE THIS NSN,
P/N IND A FOR PART A DATA. WHERE MACHINING OR ABRADING OF CURED
MATERIAL LEADS TO THE PRODUCTION OF RESPIRABLE AND/OR NUISANCE DUST
, AN APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR SHOULD BE WORN.

HCC:C2
Boiling Pt:B.P. Text:>347F,>175C
Vapor Pres:0.22 @ 25C
Vapor Density:>1
Spec Gravity:1.66
Solubility in Water:SLIGHT (0.1-1.0%)
Appearance and Odor:LIGHT GRAY PASTE. AMMONICAL ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, EPOXY RESINS, ISOCYANATES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:GASEOUS COMBINATIONS OF CARBON,
HYDROGEN, NITROGEN, AND OXYGEN MAY OCCUR AT ELEVATED TEMPERATURES.
Conditions to Avoid Polymerization:HAZARDOUS POLYMERIZATION WILL NOT
OCCUR WHEN STORED AND USED AS DIRECTED.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.