BTTZF - SATIN CAST 20

  • MSDS: BTTZF
  • Manufacturer: KERR MANUFACTURING CO
  • Product Name: SATIN CAST 20
  • National Stock Number: 6520-00F010931
Product Identification

Product ID:SATIN CAST 20
MSDS Date:05/07/1993
FSC:6520
NIIN:00F010931
MSDS Number: BTTZF

Responsible Party
KERR MANUFACTURING CO
28200 WICK RD
ROMULUS, MI 48174-0908
US

Emergency Phone: 313-946-7800

Info Phone: 313-946-7800

Cage: EO529

Contractor
KERR MANUFACTURING COMPANY, DIVISION OF SYBRON COR
ROMULUS, MI 48174 US

Telephone: (313) 946-7800

Cage: EO529

Ingredients

SILICA CRYSTALLINE, SILICA (CRISTOBALITE) (SUSPECTED HUMAN

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 35-45%

ACGIH TLV: 0.05 MG/CUM


SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 25-35%

ACGIH TLV: 0.1 MG/CUM RESP DUST


CALCIUM SULFATE

CAS: 7778-18-9

RTECS: WS6920000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:YES
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION.
INHALATION: CRYSTALLINE SILICA-PROLONGED EXPOSURE MAY CAUSE CHRONIC
LUNG INJURY (SILICOSIS), A FORM OF DISABLING PULMONARY FIBROSIS
WHICH CAN BE PROGRESSIVE & MAY LEAD TO D EATH. INGESTION: HARDENS
WHEN WETTED & IF INGESTED MAY RESULT IN AN OBSTRUCTION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, DRY FEELING ON SKIN.

First Aid

First Aid:EYES: WASH IMMEDIATELY W/PLENTY OF WATER. SKIN: WASH W/SOAP &
WATER. USE HAND LOTION. INHALATION: MOVE TO FRESH AIR AT ONCE.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Accidental Release

Spill Release Procedures:VENTILATE AREA. SWEEP UP. AVOID UNNECESSARY
STIRRING/HANDLING IN ORDER TO PREVENT FORMATION OF DUST.

Handling

Handling and Storage Precautions:DON'T BREATH DUST. KEEP CONTAINER
CLOSED. USE ACCORDING TO DIRECTIONS.
Other Precautions:FOLLOW PRESCRIBED MIXING PROCEDURE FOR KERR
INVESTMENT.

Exposure Controls

Respiratory Protection:USE NIOSH-APPROVED EQUIPMENT.
Ventilation:SUFFICIENT LOCAL EXHAUST TO REDUCE THE LEVEL OF RESPIRABLE
CRYSTALLINE SILICA TO THE PEL.
Protective Gloves:OPTIONAL
Eye Protection:GOGGLES
Supplemental Safety and Health

Chemical Properties

Spec Gravity:2.4
Solubility in Water:SLIGHT
Appearance and Odor:OFF-WHITE, ODORLESS POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID, IN WHICH SILICA WILL DISSOLVE & PRODUCE THE
CORROSIVE GAS SILICON TETRAFLUORIDE.
Stability Condition to Avoid:NONE

Disposal

Waste Disposal Methods:LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.