BTWMW - 849 3066 EKTACOLOR PRIME STABILIZER AND REPLENISHER, CONC

  • MSDS: BTWMW
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: 849 3066 EKTACOLOR PRIME STABILIZER AND REPLENISHER, CONC
  • National Stock Number: 6750-00D003357
Product Identification

Product ID:849 3066 EKTACOLOR PRIME STABILIZER AND REPLENISHER, CONC
MSDS Date:05/18/1994
FSC:6750
NIIN:00D003357
MSDS Number: BTWMW

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: 19139

Contractor
EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
ROCHESTER, NY 14650-1115 US

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

Ingredients

SUBSTITUTED THIAZOLIN-3-ONE

Fraction By Weight: < 1% %


DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: 1-5%


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 90-95% %


POLY(1-VINYL-2-PYRROLIDINONE)

CAS: 9003-39-8

RTECS: TR8160000

Fraction By Weight: 1-5% %


ORGANO SILICONE

Fraction By Weight: 1-5% %

Hazards

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPECTED TO BE A LOW INHALATION HAZARD
FOR RECOMMENDED HANDLING. CAUSES EYE IRRITATION. CAUSES SKIN
IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION. EXPECTED TO BE A LOW
INGESTION HAZARD.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION, ALLERGIC SKIN
REACTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES: WASH OUT IMMEDIATELY WITH
WATER. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR. SKIN: IMMEDIATELY
REMOVE CONTA MINATED CLOTHING AND WASH WITH SOAP ANDPLENTY OF
WATER. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR. INGESTION: DRINK
1-2 GLASSES OF WATER. SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER IF
ALLOWABLE. OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT
MATERIAL, THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN
SURFACE THOROUGHLY TO REM OVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES AND
CLOTHING. USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING. KEEP CONTAINER CLOSED WHEN NOT USING.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. DESTROY
OR THOROUGHLY CLEAN CONTAMINATED SHOES. THE ROUTINE USE OF A
NONALKALINE TYPE OF HAND CLEANER WILL HELP MINIMIZE THE POSSIBILITY
OF SKIN REACTION.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES PER
HOUR) SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:WASHING FACILITIES, AN EMERGENCY EYE WASH
STATION AND SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:T6
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:18
Vapor Density:0.4
Spec Gravity:1.015
pH:9.0
Evaporation Rate & Reference:0.4 (N-BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:BROWN LIQUID, NO ODOR
Percent Volatiles by Volume:95-100

Stability

Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS AND CONTAMINANTS WITH WHICH THE MATERIAL MAY
REASONABLY COME INTO CONTACT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.