BTWWC - ALUMINUM SHOT, KDS-44

  • MSDS: BTWWC
  • Manufacturer: KAISER ALUMINUM CORP
  • Product Name: ALUMINUM SHOT, KDS-44
  • National Stock Number: 9650-00N044847
Product Identification

Product ID:ALUMINUM SHOT, KDS-44
MSDS Date:12/01/1991
FSC:9650
NIIN:00N044847
MSDS Number: BTWWC

Responsible Party
KAISER ALUMINUM CORP
EAST 2111 HAWTHORNE RD
MEAD, WA 99021
US

Emergency Phone: 509-466-3300

Info Phone: 509-466-3300

Cage: 0PWW7

Contractor
KAISER ALUMINUM CORP
MEAD, WA 99021 US

Telephone: 509-466-3300

Cage: 0PWW7

Ingredients

10-20

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: SEE ING

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2MG/M3 FUME;1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


IRON (III) OXIDE; (IRON, FE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 1-10%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE)


1-10, PRIME

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: SEE ING

OSHA PEL 10MG/M3 FUME

ACGIH TLV: 10 MG/M3 FUME


1-10

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: SEE ING

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST


10-20

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: SEE ING

OSHA PEL 10MG/M3 TDUST;5 RESP

ACGIH TLV: 10 MG/M3 TDUST


0.1-1

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: SEE ING

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


1-10

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: SEE ING

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3


ZINC OXIDE; (ZINC, ZN)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-10%

OSHA PEL 10MG/M3 TDUST;5 FUME

ACGIH TLV: 10MG/M3 TDUST


MAY GENERATE OIL VAP WHICH IRRIT EYES & UPPER RESP

RTECS: 9999999ZZ


ALUMINUM; (AL, BASE METAL) (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 80-99.7%

OSHA PEL 15MG/M3 DUST; 5 FUME

ACGIH TLV: 10MG/M3 DUST; 5 FUME


ALLOYING ELEMENTS (CONTAINS INGS 3-11)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K


1-10

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: SEE ING

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.05 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:NOT LIKELY UNLESS MATL MACHINED,
WELDED/REMELTED. EXPOS TO ZINC OXIDE FUME CAN RSLT IN "ZINC CHILLS"
(METAL FUME FEVER). TEMPORARY SYMPS INCL FEVER, CHILLS, NAUS, VOMIT
& MUSC PAIN. RECOVERY IS USUALLY COMPLETE IN 24-48 HRS. OVEREXP TO
COPPER FUME CAN CAUSE UPPER RESP TRACT IRRIT. INGEST/SKIN: (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:COBALT:IARC MONOGRAPHS ON EVALUATION OF
CARCIN RISK OF CHEM TO MAN, VOL 52, PG 363, 1991:GROUP 2B.
ANIMAL:PULM (SUPDAT)
Effects of Overexposure:HLTH HAZ:NOT LIKELY. DO NOT TOUCH CAST ALUMINUM
METAL/HEATED ALUMINUM PROD W/OUT KNOWING METAL TEMP. ALUMINUM
EXPERIENCES NO COLOR CHG DURING HEATING. IF METAL IS HOT & TOUCHED,
BURNS CAN RSLT. EYES:M AY IRRIT WHEN WELDING/PLASMA CUTTING. SOME
ALUMINUM SCRAP MAY BE CONTAMD W/OILS @ LEVELS >1%. MELTING ALUMINUM
(ING 12)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION: CALL MD IMMEDIATELY . SKIN: REMOVE PARTICLES BY
THOROUGHLY WASHING WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
I NHALATION: REMOVE FROM EXPOSURE. GET MEDICAL ATTENTION IF
EXPERIENCING BREATHING DIFFICULTY.

Fire Fighting

Flash Point:NOT FLAMMABLE
Extinguishing Media:DRY POWDER OR SAND.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER OR HALOGEN ON DUST FIRES.
Unusual Fire/Explosion Hazard:DAMP ALUMINUM DUST MAY SPONT HEAT
W/LIBERATION OF HYDROGEN TO FORM EXPLO AIR MIX. WHEN REMELTING
SCRAP, ENTRAPPED MOISTURE/PRESENCE OF STRONG OXIDIZERS (SUPDAT)

Accidental Release

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PROD HAS BEEN DRYED, BUT RESIDUAL
MOISTURE COULD CAUSE STEAM GENERATION UPON REHEATING. ALUMINUM PWDR
MUST BE PACKED & SHIPPED AS FLAMM SOLID, UN1396.
Other Precautions:VAP DEGREASER MUST BE PROPERLY MAINTAINED TO LIM
ACCUM OF ALUMINUM FINES WHICH COULD RSLT IN POTNTL DEGREASER
FIRE/EXPLOS. MOISTURE MUST BE DRIVEN OFF BEFORE REMELTING TO
PREVENT EXPLOSION.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM SAFETY GOGG .
Other Protective Equipment:PROT EQUIP REQD WHEN
MELTING/CASTING/MACHINING/FORGING/PROCESSING. NATURE OF ACTIVITY
WILL DETERM WHAT EQUIP IS NEC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SUCH AS AMMONIUM NITRATE COULD CAUSE EXPLOS. APPLIES TO
COLLECTION OF MOISTURE IN SOW CAVITIES AS WELL. MATLS TO
AVOID:PRESENCE OF BROMATES, IODATES/AMMONIUM NITRATE. ACIDS & BASES
IN CNTCT W/ALUMINUM MAY GENERATE EXPLO MIX W/HYDROGEN. EXPLAN OF
CARCIN:FIBROSIS (BLOOD EFFECTS). EFTS OF OVEREXP:SCRAP (ING 12)

Chemical Properties

HCC:F8
Melt/Freeze Pt:M.P/F.P Text:>950F,>510C
Spec Gravity:2.5-2.9(H*2O=1)
Solubility in Water:NIL
Appearance and Odor:METALLIC APPEARANCE; NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
ANHYDROUS BROMINE. FINELY DIVIDED ALUMINUM WILL FORM EXPLO MIX IN AIR.
WILL ALSO FORM EXPLO MIX IN AIR IN (SUPDAT)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING ALUMINUM ALLOYS MAY GENERATE
CO, CO*2, OZONE, NITROGEN OXIDES, INFRA-RED & ULTRA-VIOLET RADIA &
METAL FUME.

Disposal

Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE TESTED TO
DETERMINE HAZARD STATUS AND DISPOSAL REQUIREMENTS UNDER FEDERAL,
STATE AND LOCAL LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.