BTXPD - AQUASHEEN NAVAJO, 235

  • MSDS: BTXPD
  • Manufacturer: DECRATREND PAINT CORP
  • Product Name: AQUASHEEN NAVAJO, 235
  • National Stock Number: 8010-00N046015
Product Identification

Product ID:AQUASHEEN NAVAJO, 235
MSDS Date:01/01/1992
FSC:8010
NIIN:00N046015
MSDS Number: BTXPD

Responsible Party
DECRATREND PAINT CORP
251 MASON WAY
CITY OF INDUSTRY, CA 91746
US

Emergency Phone: 818-333-4592

Info Phone: 818-333-4592

Preparer: R & D LABORATORY

Cage: 42590

Contractor
DECRATREND PAINT CORP
CITY OF INDUSTRY, CA 91746 US

Telephone: 818-333-4592

Cage: 42590

Ingredients

0.1 @ 68F

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 5%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM,VAP/MIST, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


>5 G/KG

CAS: 25265-77-4

Fraction By Weight: 50%

OSHA PEL N/K

ACGIH TLV: N/K


PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: < 5%

OSHA PEL N/K

ACGIH TLV: N/K


1.73 LB/GL (208 G/L)

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:ADVERSE EFTS FROM VAP OR SPRAY
MISTS IN POORLY VENT AREAS MAY INCLUDE IRRIT OF THE MUCOUS MEMBRANE
OF THE NOSE, THROAT, AND RESPIRATORY TRACT AND SYMPTOMS OF HEADCHE
AND NAUSEA. EYE: IN DIRECT C NTCT, MAY CAUSE IRRITATION. SKIN:
PROLONGED & RPTD CNTCT W/PROD MAY CAUSE SKIN IRRIT. SKIN ABSORP:
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: REDNESS, DRYING OF SKIN, OR OTHER
SIGNS OF IRRIT OR CONTACT DERM. INGEST: CAN CAUSE GI IRRIT, NAUSEA,
VOMIT, & DIARRHEA. ACUTE: MAY CAUSE IRRIT TO SKIN, EYES AND
INTESTINAL SYSTEM. CHRONIC: CHRONIC OVEREXPOSURE TO TIO2 DUST MAY
CAUSE SLIGHT LUNG FIBROSIS.
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH IMMED W/LARGE AMTS OF
WATER FOR @ LST 15 MIN. TAKE TO A PHYSICIAN FOR MED ATTN. SKIN:
REMOVE W/SOAP & WATER. REMOVE ALL CONTAMINATED CLOTHING. INGEST:
DRINK 1 O R 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING.
CONSULT A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT
SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:241F,116C
Lower Limits:0.6%
Upper Limits:4.2%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:COOL CONTAINERS WITH WATER SPRAY. WEAR
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY EXPLODE DUE TO BUILD UP OF STEAM PRESSURE.

Accidental Release

Spill Release Procedures:DIKE, CONTAIN OR ABSORB W/INERT MATERIAL (I.
E. SAND, VERMICULITE, ETC.). TRANSFER TO CONTAINERS FOR RECOVERY OR
DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER BODIES OF
WATER. SEE INGRED AND PRECAUTIONS FOR SAFE HNDLG & USE SECTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED REPEATED
EXPOSURE TO LEVELS ABOVE TLV.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED USE
NIOSH/MSHA APPROVED ORGANIC VAPOR OR MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKER GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. FURNISH ANSI
APPROVED EYEWASH STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
Spec Gravity:1.3 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, ETC.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
OR FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.