BTYCB - RAMROD, S30D-14
- MSDS: BTYCB
- Manufacturer: POLYSCIENCE
- Product Name: RAMROD, S30D-14
- National Stock Number: 6810-00N047418
Product Identification
Product ID:RAMROD, S30D-14
MSDS Date:04/01/1992
FSC:6810
NIIN:00N047418
MSDS Number: BTYCB
Responsible Party
NILES, IL 60648
US
Emergency Phone: 321-965-0611
Info Phone: 321-965-0611
Cage: IO526
Contractor
Telephone: 708-965-0611
Cage: 58378
Ingredients
ACETANILIDE, 2-CHLORO-N-ISOPROPYL-; (RAMROD)
CAS: 1918-16-7
RTECS: AE1575000
OSHA PEL N/K
ACGIH TLV: N/K
ON GROUND SHOULD BE CNTND IN SMALLEST POSS AREA DIG
RTECS: 9999999ZZ
IN AN APPRVD LANDFILL. LEAKING CONTRS/COLLECTED
RTECS: 9999999ZZ
IN AN APPRVD LANDFILL. OBSERVE ALL PROT & SFTY PREC
RTECS: 9999999ZZ
HERBICIDE.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED/ABSORBED THRU
SKIN. CAUSES EYE AND SKIN IRRITATION. MAY CAUSE ALLERGIC SKIN
REACTION. MODERATELY IRRITATING TO EYES. SEVERELY IRRITATING TO
SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:MAY CAUSE SKIN SENSITIZATION IN
SUSCEPTIBLE INDIVIDUALS.
First Aid
First Aid:EYES: IMMED FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN. CALL A
PHYS. SKIN: IMMED FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN WHILE
REMOVING CONTAMD CLTHG & SHOES. WASH CLTHG BEFORE REUSE. INGEST:
DRINK 1-2 GLASSES OF WATER & INDUCE VOMIT BY TOUCHING BACK OF
THROAT W/FINGER/BLUNT OBJECT. DO NOT INDUCE VOMIT/GIVE ANYTHING BY
MOUTH TO AN UNCON PERSON. GET MED ATTN. INHAL: REMOVE TO FRESH AIR.
(SUPDAT)
Fire Fighting
Flash Point:>212F,>100C
Extinguishing Media:IN CASE OF FIRE, USE WATER SPRAY, FOAM, DRY
CHEMICAL/CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . FIREFIGHTING EQUIPMENT MUST BE THORO CLEANED
& DECONTAMD AFTER USE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:DO NOT REUSE CONTR. DESTROY WHEN EMPTY.
DISPOSE OF IN AN INCIN/LANDFILL APPRVD FOR PESTICIDE CONTRS.
SPILLS/LEAKS ON FLOOR/OTHER IMPERVIOUS SURF CAN BE COVERED
W/ATTAPULIGITE/BENTONITE. SCOOP UP CONTA MD CLAY, PLACE IN METAL
DRUM & DISPOSE OF (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT GET IN EYES, ON SKIN/CLTHG.
KEEP CONTR CLSD. WHILE HNDLG, WEAR RUBB GLOVES. AVOID CONTAM OF
SEED, FEED & FOODSTUFFS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED EQUIPMENT WHEN AIRBORNE
EXPOSURE IS EXCESSIVE. CONSULT RESPIRATOR MFR TO DETERM APPROPRIATE
TYPE OF EQUIPMENT FOR A GIVEN APPLICATION.
Ventilation:PROVIDE VENTILATION TO MINIMIZE EXPOSURE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORK GOGG .
Other Protective Equipment:PROT LONG SLEEVED CLTHG. IMPERVIOUS APRONS.
Work Hygienic Practices:REMOVE CONTAMD CLTHG PROMPTLY & LAUNDER BEFORE
REUSE. WASH HANDS & CONTAMD SKIN THORO AFTER HNDLG RAMROD
FLOWABLE(ING 5)
Supplemental Safety and Health
STAB (CNDTNS): RESUSPEND WHEN TEMP IS ABOVE 40F. ABOVE 100F PROD MAY
BECOME THICK & UNSPRAYABLE. FIRST AID PROC:SUPPORT BRTHG (GIVE
O*2/ARTF RESP) . SPILL PROC: IN AN APPRVD HAZ WASTE LANDFILL. WHEN
ALL POSS SOLID MATL HAS BEEN PICKED UP, SCRUB SURF W/A STRONG
DETERGENT SOLN & RINSE W/WATER. SPILLS/LEAKS (ING 2)
Chemical Properties
HCC:T5
Spec Gravity:1.14
pH:4.5
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
CORROSIVE TO MILD STEEL BUT NOT TO STAINLESS STEEL, LINED
STEEL/PLASTIC.
Stability Condition to Avoid:STORE ABOVE 20F & BELOW 100F TO KEEP PROD
IN SUSPENSION. LOW 20F PROD MAY FREEZE. IF FROZEN, MIX WELL TO
(SUPDAT)
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:CONSULT FEDERAL, STATE OR LOCAL DISPOSAL
AUTHORITIES FOR ADDITIONAL OR ALTERNATIVE REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.