BTYFQ - FREON 113 SOLVENT
- MSDS: BTYFQ
- Manufacturer: SPC TECHNOLOGY
- Product Name: FREON 113 SOLVENT
- National Stock Number: 6830-00N047798
Product Identification
Product ID:FREON 113 SOLVENT
MSDS Date:02/27/1989
FSC:6830
NIIN:00N047798
MSDS Number: BTYFQ
Responsible Party
CHICAGO, IL 60666
US
Emergency Phone: 312-784-5100
Info Phone: 312-784-5100
Cage: 12341
Contractor
Cage: 63590
Ingredients
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE;
CAS: 76-13-1
RTECS: KJ4000000
Fraction By Weight: 90-99%
OSHA PEL 1000 PPM;1250 STEL
ACGIH TLV: 1000 PPM;1250 STEL
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: 1-5%
OSHA PEL 5000 PPM
ACGIH TLV: 5000 PPM;30000 STEL
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT)43,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE IRRITATION. CHRONIC:
HEADACHE, DIZZINESS. MAY CAUSE EYE IRRITATION. VAPORS IN HIGH CONC
ARE ANESTHETIC AND IRRITATE UPPER RESPIRATORY SYSTEM. EXCESS
INHALATION MAY CAUSE DIZZINESS, GIDDINES S, AND NAUSEA.
MISUSE/DELIBERATE INHALATION MAY BE HARMFUL/FATAL. PROLONGED &
REPEATED INHAL MAY BE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: HARMFUL TO RESPIRATORY SYSTEM, HEART,
AND CENTRAL NERVOUS SYSTEM
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
AND CALL PHYSICIAN. SKIN: WASH THORO WITH PLENTY OF WATER AND SOAP.
INHAL: REMOVE TO FRESH AIR, ADMINISTER OXYGEN AND CALL PHYSICIAN.
INGE ST: SEEK PHYSICIAN IMMEDIATELY, SHOW MSDS/LABEL, DO NOT INDUCE
VOMITING.
Fire Fighting
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPOS TO FIRE, HEAT/PRLNGD SUNLIGHT MAY
CAUSE BURSTING. IF USED IN CONFINED SPACES, HAZ VAPORS MAY SPREAD,
BURN/BUILD UP IN LOW AREAS. CONT W/FLAME/ (SUPDAT)
Accidental Release
Spill Release Procedures:EVAC AREA, REMOVE ALL SOURCES OF IGNITION AND
OPEN FLAME, VENTILATE AREA, CLEAN UP WITH ABSORBENT MATERIAL,
CONTAIN AND PICKUP WASTE MATERIALS, PUT IN A SEALED APPROVED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP IN A COOL PLACE. AVOID EXPOS TO
FIRE, HEAT/PRLNGD SUNLIGHT. USE ONLY IN WELL VENTD AREAS. AVOID
PRLNGD BRTHG OF VAP/SPRAY MIST.
Other Precautions:AVOID PRLNGD/RPTD CONT W/SKIN. DO NOT TAKE
INTERNALLY. DO NOT PUNCT, INCIN(OR BURN) CONTRS. KEEP OUT OF REACH
OF CHILDREN. ALWAYS READ & FOLLOW DIREC ON PROD LBL. ADDNL TECH
DATA SHEETS &/OR MSDS ARE AVAIL UPON REQUEST. FOR (SUPP DATA)
Exposure Controls
Respiratory Protection:USE ONLY IN WELL VENTILATED AREAS. IF
VENTILATION IS INADEQUATE, WEAR NIOSH/MSHA APPROVED RESPIRATORY
EQUIPMENT.
Ventilation:LOCAL/MECHANICAL: REQUIRED. SPECIAL: KEEP AWAY FROM
HEAT/FLAME.
Protective Gloves:SOLVENT RESISTANT.
Eye Protection:ANSI APPROVED CHEM WORK GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THORO AFTER USING. IN CASE OF
ACCIDENT/ILLNESS, SEEK PHYS IMMED, SHOW LABEL/MSDS.
Supplemental Safety and Health
EXPLO HAZ:HOT SURF MAY PRODUCE TOXIC GASES. OTHER PREC: PROFESSIONAL
AND INDUSTRIAL USE ONLY.
Chemical Properties
Boiling Pt:B.P. Text:117F,47C
Vapor Pres:284
Vapor Density:6.5
Spec Gravity:1.57
Evaporation Rate & Reference:10(WATER=1)
Solubility in Water:NIL
Appearance and Odor:COLORLESS LIQUID, AEROSOL, SLIGHT CHLORINATED
SOLVENT ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
ALUMINUM, REACTIVE METALS.
Stability Condition to Avoid:AVOID EXPOSURE TO FIRE, HEAT, OR PROLONGED
SUNLIGHT.
Hazardous Decomposition Products:CO, HCL, HF, PYROLYSIS PRODUCTS.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE I/A/W FEDERAL, STATE, AND LOCAL
REGULATIONS. DO NOT PUNCTURE OR BURN CONTAINERS. DO NOT EMPTY INTO
DRAINS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.