Product ID:RESIN BONDED ABRASIVE PRODUCT
MSDS Date:01/21/1991
FSC:5350
NIIN:00N050600
MSDS Number: BTZLJ

ARROW ABRASIVE CO

12033 1/2 REGENTVIEW AVE
DOWNEY, CA 90241
US

Emergency Phone: 310-868-1444

Info Phone: 310-889-2282

Cage: AWRRA

ARROW ABRASIVE CO

DOWNEY, CA 90241 US

Telephone: 310-869-2282

Cage: AWRRA

CALCIUM CARBONATE; (LIMESTONE) MFR'S CAS # 1316-65-3

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

FIBROUS GLASS (IF REINFORCED)

OSHA PEL N/K

ACGIH TLV: 10 MG/M3 (MFR)

CALCIUM OXIDE; (LIME)

CAS: 1305-78-8

RTECS: EW3100000

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3

PRODUCT MAY CONTAIN ANY OR ALL OF INGREDIENTS 2-12.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

3); (ALUMINA) (SARA 313)

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICON CARBIDE

CAS: 409-21-2

RTECS: VW0450000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PHENOLIC RESIN; (PHENOL FORMALDEHYDE)

OSHA PEL N/K

ACGIH TLV: 10 MG/M3 (MFR)

2-FURALDEHYDE; (FURFURAL) (CERCLA)

CAS: 98-01-1

RTECS: LT7000000

OSHA PEL 5 PPM, S

ACGIH TLV: 2 PPM, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SODIUM FLUOALUMINATE; (SODIUM ALUMINUM FLORIDE) (CRYOLITE)

CAS: 15096-52-3

RTECS: WA9625000

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)

BORATE (1-), TETRAFLUORO-, POTASSIUM; (POTASSIUM FLUBORATE)

CAS: 14075-53-7

RTECS: ED2800000

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)

CALCIUM FLUORIDE; (FLUORSPAR)

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)

IRON (III) OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: PROLONGED EXPOSURE TO GRINDING
DUST MAY CAUSE RESPIRATORY PROBLEMS OR AGGRAVATE EXISTING PROBLEMS.
DUST GENERATED DURING USE OF PRODUCT IS CLASSIFIED BY OSHA AS INERT
OR NUISANCE DUST AND HAS S AME PULMONARY EFFECTS OF ALL INERT DUST.
INGEST: NO KNOWN ADVERSE EFFECTS, BUT INGESTION IS NOT (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: RECOMMENDED. SKIN: EXCESSIVE CONTACT
WITH DUST MAY CAUSE SKIN IRRITATION. EYES: DUST MAY IRRITATE EYES.
Medical Cond Aggravated by Exposure:PROLONGED EXPOSURE TO GRINDING DUST
MAY AGGRAVATE EXISTING RESPIRATORY PROBLEMS.

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: WASH
AFFECTED AREAS WITH SOAP AND WATER. OBTAIN MEDICAL ASSISTANCE.
EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
OBTAIN MEDICAL ASSISTANCE.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:NORMAL CLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:REFER TO ANSI B7.1 REGARDING "SAFETY
REQUIREMENTS FOR THE USE, CARE AND PROTECTION OF ABRASIVE WHEELS."
Other Precautions:AVOID SKIN AND EYE CONTACT WITH GRINDING DUST.

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST RESPIRATORS AS
REQUIRED TO MAINTAIN EXPOSURE BELOW THRESHOLD LIMIT VALUES (TLVS).
Ventilation:LOCAL EXHAUST VENTILATION AS NECESSARY TO KEEP DUST LEVELS
BELOW THRESHOLD LIMIT VALUES.
Protective Gloves:LEATHER, CLOTH OR RUBBER/VINYL GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:APRON AND/OR FACE SHIELDS AS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: WHEEL. COOLANTS MAY PRODUCE OTHER DECOMPOSITION
PRODUCTS.

Spec Gravity:1
Appearance and Odor:PRODUCT IS SOLID; MAY PRODUCE ODOR IN USE.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DUSTS ARE GENERATED IN USE. IN MOST
CASES, DUST FROM WORKPIECE WILL BE SIGNIFICANTLY GREATER THAN FROM
GRINDING (SUPDAT)

Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT WITH
APPLICABLE FEDERAL, STATE AND LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.