Product ID:XUPERBOND
MSDS Date:03/13/1993
FSC:3439
NIIN:01-074-3199
MSDS Number: BVBKR

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: >50%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 1-5%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST

1); (LEAD CHROMATE)

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 1-5%

OSHA PEL N/K

ACGIH TLV: N/K

GRP 2B.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

MAY CAUSE BRONCH ASTHMA, LUNG FIBROSIS,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

CAN BE CAUSED BY INHAL OF CERTAIN

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

SOLDERING/CUTTING OPERS. SYMPS ARE SIMILAR TO

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ACHE, TIGHTNESS IN CHEST, DRYNESS OF NOSE & MOUTH,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

SEVERAL HRS AFTER OVEREXP & MAY LAST 6-24 HRS.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

OF NICKEL FUMES MAY INCL METALLIC TASTE, NAUS,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

MAY ALSO CAUSE ALLERGIC RXNS. LONG TERM OVEREXP TO

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

PNEUMOCONIOSIS. STUDIES OF NICKEL REFINERY WORKERS

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

Z49.1 "SAFETY IN WELDING AND CUTTING", &

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

WELDING SOCIETY AND OSHA PUBLICATION 2206 (29 CFR

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

WELDER TO KEEP HIS/HER FACE AWAY FROM FUME/DUST

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

APPROP FILTER LENS. PROVIDE PROT SCREENS & FLASH

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

THAT IS TOO DARK TO SEE WELD ZONE, THEN GO TO NEXT

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

AND MAY INCL ARM PROT, APRONS, HATS AS WELL AS DARK,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ELECTRICAL PARTS AND TO INSULATE THEMSELVES FROM

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

SUFFICIENT VIEW OF THE WELD ZONE.

RTECS: 9999999ZZ

SPARKS & ELECTRICAL SHOCK. ARMS

RTECS: 9999999ZZ

TRAIN WORKERS NOT TO TOUCH LIVE ELECTRICAL PARTS AND

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: FUMES ASSOC W/HEATING, WELDING,
BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR HLTH &
OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORGAN DMG. EYE/SKIN: ARC RAYS
& UV LIGHT CAN INJ EYES & B URN SKIN. LIQS USED IN FLUXES & CHEM
AIDS MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC SHOCK CAN KILL.
INGEST:(EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD CHROMATE: IARC MONOGRAPHS ON EVAL
OF CARCIN RISK OF CHEMS TO MAN, VOL 49, PG 49, 1990: GRP 1.NTP 6TH
ANNUAL(SUPDAT)
Effects of Overexposure:HLTH HAZ: DANGER! MAY BE HARMFUL/FATAL IF
SWALLOWED.GEN WELDING FUMES: FUMES, GASES & DUSTS CAN BE DANGEROUS
TO YOUR HLTH. CERTAIN MED STUDIES HAVE SUGGESTED THAT LUNG DMG CAN
RSLT FROM OVEREXP TO THE SE FUMES. SHORT TERM OVEREXP MAY RSLT IN
DIZZ, NAUS/DRYNESS OR IRRIT OF NOSE, THROAT OR EYES. EXCESSIVE
OVEREXP (ING 5)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHALATION: MOVE VICTIM TO FRESH AIR SOURCE. CONTACT PHYS AND
ADVISE ON INGS LISTED. SKIN: THORO WASH HANDS OR EFFECTED AREAS
WITH SOAP AND WATER TO REMOVE ALL RESIDUE. CONSULT PHYS. EYE: THORO
FLUSH WITH WATER FOR AT LST 15 MINS TO REMOVEALL RESIDUE. OBTAIN
PROMPT MED ADVISE FOR FLUXES AND CHEM AIDS. ADVISE PHYS OF INGS
LISTED. INGEST: CALL PHYS &/OR LOC POIS CNTRL CNTR. ADVISE OF INGS
LISTED.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TOXIC FUMES MAY BE PRODUCED.
Unusual Fire/Explosion Hazard:SOME FLUXES AND CHEMICAL AIDS MAY GIVE
OFF HYDROGEN CHLORIDE, PHOSGENE AND CHLORINE GASES. CANS, UNDER
PRESSURE, AND FLAMMABLES MAY EXPLODE.

Spill Release Procedures:USE APPROPRIATE MEASURES TO KEEP AIRBORNE DUST
LEVELS CONTAINED IN ACCORDANCE WITH EXPOSURE LEVELS OF INGREDIENTS
SECTION. SEE ALSO PROTECTIVE EQUIPMENT FOR SAFE HANDLING AND
STORAGE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PLEASE READ AND UNDERSTAND PRODUCT
LABEL INFORMATION FOR PROPER PROCEDURES AND USE.
Other Precautions:USE ADEQ VENT TO KEEP BELOW EXPOS LIMITS. KEEP FUMES
& GASES FROM BRTHG ZONE-KEEP WELDER'S HEAD OUT OF FUMES. HNDL
W/CARE AS SHOWN. WEAR PROPER EYE,EAR & BODY PROT.USE CHEM GOGG,
GLOVES & FACESHLD FOR ALL FLUXES & CHEM AIDS.SEE ANSI(ING 13)

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW RECOMMENDED EXPOSURE
LIMITS, USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN(ING 15)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACESHLD WITH (ING 16)
Other Protective Equipment:WEAR HAND, HEAD,& BODY PROT WHICH HELP PVNT
INJ FROM RADIA, SPARKS & ELEC SHOCK. AT MIN, THIS INCL PROT
FACESHLD(ING 18)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: PRDCE FLUORIDE CMPDS, METAL OXIDES, CARBON & SILICA.
GASEOUS RXN PRODS MAY INCL OZONE, CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES, & CERTAIN INERT GASES USED AS SHIELDING GASES .
EXPLAN OF CARCIN: REPORT ON CARCINS, 1991: KNOWN TO BE CARCIN.
NICKEL: IARC MONOGRAPHS ON EVAL OF CARCIN RISK (ING 4)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED CONSTITUENTS OF
FUME MAY INCL: COMPLEX OXIDES OF METALS LISTED IN ING SEC: FLUX
COATINGS MAY(SUPDAT)

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS, GRINDING, OR
FILTER RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.