BVCXK - TONER (TK-7) FOR KYOCERA LASER PRINTER
- MSDS: BVCXK
- Manufacturer: KYOCERA CORP
- Product Name: TONER (TK-7) FOR KYOCERA LASER PRINTER
- National Stock Number: 6850-00N049439
Product Identification
Product ID:TONER (TK-7) FOR KYOCERA LASER PRINTER
MSDS Date:11/07/1991
FSC:6850
NIIN:00N049439
MSDS Number: BVCXK
Responsible Party
WATARAI-CIUN MIE-PREF, 519-04, JAPAN
Emergency Phone: 510-748-6666
Info Phone: 510-748-6666
Cage: 0CVXB
Contractor
Telephone: 510-748-6666
Cage: 0CVXB
Ingredients
POLYESTER RESIN
CAS: 99546-37-9
Fraction By Weight: 87.3%
OSHA PEL N/K
ACGIH TLV: N/K
PROPENE POLYMERS
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: >4.5%
OSHA PEL N/K
ACGIH TLV: N/K
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <7.7%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
SILICON DIOXIDE; (SILICA (SIO*2))(MFR CAS # 68611-44-4).
CAS: 7631-86-9
Fraction By Weight: > 0.5%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT: NON-IRRITATING,
NON-TOXIC. EYE CONTACT: DUST OF THE PRODUCT MAY CAUSE EYE
IRRITATION. INHALATION: DUST OF THE PRODUCT MAY CAUSE LUNG
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE FROM EXPOSURE.
EYE: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MIN. INGEST:
CONSULT A PHYSICIAN.
Fire Fighting
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN WITH VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP IN A CLOSED PACKAGE.
Other Precautions:NO OTHER SPECIAL PRECAUTIONS FOR SAFETY REASON IS
NECESSARY.
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: PREFERABLE. MECHANICAL: ACCEPTABLE.
Protective Gloves:NORMALLY NOT REQUIRED.
Eye Protection:NORMALLY NOT REQUIRED.
Other Protective Equipment:NONE
Work Hygienic Practices:PREFERABLE (INSTRUCTION FOR WORKERS).
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:284F,140C
Spec Gravity:1.5 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO*2.
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPTED/INCINERATED IN A
CLOSED PACKAGE UNDER THE CONDITIONS WHICH MEET FEDERAL, STATE AND
LOCAL REGULATIONS. (FOR PREVENTION OF DUST).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.