Product ID:PROPANE FUEL (0916-0004)
MSDS Date:01/01/1991
FSC:6830
NIIN:00N051603
MSDS Number: BVFFJ

VICTOR EQUIPMENT CO

DRAWER 1007
DENTON, TX 76202
US

Emergency Phone: 214-590-5000

Info Phone: 817-566-2000

Cage: 63026

VICTOR EQUIPMENT CO

1007 DENTON, TX 76202 US

Telephone: 940-566-2000

Cage: 63026

2.15-9.6.

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: SEE ING

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT

REMOVAL FROM CONTAM AREA IS MOST IMPORTANT. UNCON

RTECS: 9999999ZZ

MOUTH RESUSCITATION & SUPP OXYGEN. FURTHER TREATMENT

RTECS: 9999999ZZ

CLTHG & FLUSH AFFECTED AREAS W/LUKEWARM WATER. DO NOT

RTECS: 9999999ZZ

FIRST PURGING W/INERT GAS & THEN VENTILATING W/AIR.

RTECS: 9999999ZZ

SHADE #4 OR DARKER.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:CONCENTRATION CAN LEAD TO
SYMPTOMS RANGING FROM DIZZINESS TO ANESTHESIA & RESPIRATORY ARREST.
EYES:MODERATE IRRITATION. REPEATED EXPOSURE TO TOLERABLE LEVELS HAS
NOT SHOWN DELIRIOUS EFFECTS. THE MAJOR PROPERTY IS THE EXCLUSION
OF AN ADEQUATE SUPPLY OF OXYGEN TO THE LUNGS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:PROMPT MED ATTN IS MANDATORY IN ALL CASES OF OVEREXP TO THIS
FUEL GAS MIXT. RESCUE PERS SHOULD BE EQUIPPED W/NIOSH/MSHA APPRVD
SCBA & BE COGNIZANT OF EXTREME FIRE & EXPLO HAZ. INGEST:CALL MD
IMMED (FP N). EYES:IMMED FLUSH W/POTABLE WATER FOR MIN OF 15 MINS,
SEEK ASSISTANCE FROM MD . INHAL:REMOVE TO FRESH AIR. GUARD AGAINST
SELF-INJURY. APPLY ARTF RESP IF BRTHG HAS STOPPED. CONSCIOUS
(SUPDAT)

Lower Limits:2.15%
Upper Limits:9.6%
Extinguishing Media:CLASS A-B-C OR BC FIRE EXTINGUISHERS.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
STOP FLOW OF GAS. USE WATER TO KEEP FIRE-EXPOS CNTNRS COOL. USE
WATER SPRAY TO DISPERSE UNIGNITED (SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:EVACUATE ALL PERS FROM AFFECTED AREA. USE
APPROP PROT EQUIP. IF LEAK IS IN USER'S EQUIP, BE CERTAIN TO PURGE
PIPING W/INERT GAS PRIOR TO ATTEMPTING REPAIRS. IF LEAK IS IN CNTNR
VALVE, CONT CLOSEST SUP PLIER LOCATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ANY LEAKS OF MAPP GAS PRESENTS GREAT
DANGER OF EXPLOSION OR FIRE. KEEP ALL SOURCES OF IGNITION AWAY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:RESPIRATORY PROTECTION IS NOT NORMALLY REQUIRED.
USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR FOR EXTREME
CONFINED AREAS WHERE TLV'S MAY BE EXCEEDED WHEN WELDING, CUTTING OR
BRAZING.
Ventilation:PROVIDE LOC EXHST/MECH VENT IF WELDING/CUTTING IN CONFINED
AREAS. DO NOT ENTER AREA OF HIGH MAPP CONC UNTIL (ING 5)
Protective Gloves:LEATHER GLOVES WHEN WELDING.
Eye Protection:SAFETY GLASSES W/FILTER LENSES, (ING 6)
Other Protective Equipment:LEATHER APRONS WHEN WELDING, CUTTING OR
BRAZING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:GAS/VAP. IF IGNIT HAS OCCURRED & NO WATER AVAIL, TANK
METAL MAY WEAKEN FROM OVERHEATING. EVACUATE AREA. IF GAS HAS NOT
IGNITED, LP-GAS LIQ/VAP MAY BE DISPERSED BY WATER SPRAY/FLOODING.
MATLS TO AVOID:PERMANGANATE. FIRST AIDPROC:PERS SHOULD BE ASSISTED
TO UNCONTAM AREA & INHALE FRESH AIR. QUICK (ING 2)

Boiling Pt:B.P. Text:-44F,-42C
Vapor Pres:9825 @100F
Vapor Density:1.52
Spec Gravity:0.51 (H*2O=1)
Evaporation Rate & Reference:NONE
Solubility in Water:SLIGHTLY
Appearance and Odor:CLEAR; UNPLEASANT ODOR (CAUSED BY ODORANT).
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
NATRL RUBBER, COPPER ALLOYS >65% COPPER, SILVER, MERCURY, HALOGENS,
ACIDS, METALLIC SODIUM POTASSIUM, POTASSIUM (SUPDAT)
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:PRODUCES ACETYLIDES WHEN IN CONTACT
W/SILVER, MAGNESIUM OR COPPER ALLOYS >65% COPPER.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . DO NOT ATTEMPT TO DISPOSE OF WASTE OR UNUSED
QUANTITIES. RETURN IN SHIPPING CONTAINER PROPERLY LABELED, W/VALVE
PROTECTION CAP IN PLAC E TO SUPPLIER FOR PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.