BVGGG - CASCOPHEN RS-240MD
- MSDS: BVGGG
- Manufacturer: BORDEN INC
- Product Name: CASCOPHEN RS-240MD
- National Stock Number: 8040-00-054-5023
Product Identification
Product ID:CASCOPHEN RS-240MD
MSDS Date:05/12/1992
FSC:8040
NIIN:00-054-5023
Kit Part:Y
MSDS Number: BVGGG
Responsible Party
COLUMBUS, OH 43215-3705
US
Emergency Phone: 614-225-6124
Info Phone: 614-225-6124
Cage: 07982
Contractor
Telephone: 614-225-6124
Cage: 07982
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 5-10%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9394
RESORCINOL (SARA III)
CAS: 108-46-3
RTECS: VG9625000
Fraction By Weight: 1-5%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/20 STEL; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PHENOL (SARA III)
CAS: 108-95-2
RTECS: SJ3327000
Fraction By Weight: 5-10%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SODIUM HYDROXIDE (SARA III)
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 1-5% %
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN-A SIMILIAR PRODUCT WAS FOUND TO
BE NON-TOXIC. INGESTION-MOT EXPECTED TO BE HARMFUL UNDER NORMAL
CONDITIONS OF USE. INHALATION-NOT EXPECTED TO BE HARMFUL UNDER
NORMAL CONDITIONS OF USE. SKIN-CAUSE S IRRITATION.
Explanation of Carcinogenicity:NO
Effects of Overexposure:INHALATION-MAY CAUSE IRRITATION TO NOSE, THROAT
AND LUNGS. EYES-CAUSES BURNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGESTION-DILUTE BY DRINKING LARGE QUANTITIES OF WATER.
IMMEDIATELY CONTACT POISON CONTROL CENTER FOR ADDITIONAL TREATMENT.
INHALATION-REMOVE TO FRESH AIR. SKIN-IN CASE OF IRRITATION, FLUSH
WITH WATE R. EYE CONTACT-IMMEDIATELY FLUSH EYES WITH PLENTY OF
WATER FOR AT LEAST 15 MIN. EYELIDS SHOULD BE HELD APART DURING
IRRIGATION TO INSURE WATER CONTACT WITH ENTIRE SURFACE OF EYE AND
LIDS. CALL DOCTOR.
Fire Fighting
Flash Point:127F,53C
Extinguishing Media:IN CASE OF FIRE, USE DRY CHEMICAL, "ALCOHOL" FOAM
OR CARBON DIOXIDE.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT SHOULD BE USED
TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:COMBUSTIBLE.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL AREA.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A
COOL, DRY PLACE. NOT HARMED BY FREEZING. IF FROZEN, RESIN SHOULD BE
THAWED SLOWLY AT ROOM TEMPERATURE & AGITATE.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
CRITERIA, USE NIOSH/MSHA APPROVED FULL FACEPIECE RESPIRATORY
PROTECTION EQUIPMENT. RESPIRATORS SHOULD BE SELECTED BASED ON THE
FORM AND CONCENTRATION OF CO NTAMINANTS IN THE AIR.
Ventilation:LOCAL EXHAUST, ENCLOSED SYSTEM DESIGN, PROCESS ISOLATION/
REMOTE CONTROL IN COMBINATION WITH USE OF PERSONAL PROTECTION.
Protective Gloves:IMPERVIOUS GLOVES TO PREVENT CONTACT
Eye Protection:GOGGLES IF CONTACT IS LIKELY
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE RESUE.
Supplemental Safety and Health
THIS IS PART "B" OF A TWO PART KIT.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:216F,102C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:50 MMHG
Spec Gravity:1.14
Evaporation Rate & Reference:0.6 (N-BUTYL ACETATE=1)
Solubility in Water:FAIR TO POOR
Appearance and Odor:CLEAR LIQUID, REDDISH BROWN COLOR, SLIGHT ALCOHOLIC
ODOR.
Percent Volatiles by Volume:46%
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA
704-12(4-3.1).
Hazardous Decomposition Products:CO, CO2, ALDEHYDES (INCLUDING
FORMALDEHYDE), PARTICULATE MATTER AND OTHER ORGANIC COMPOUNDS.
Disposal
Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE/PROVINCIAL, AND FEDERAL REQUIREMENTS.
EMPTY CONTAINERS: MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT,
PUNCTURE OR WELD ON OR NE ARBY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.