BVJBB - POLY(VINYL ACETATE), 346

Product Identification

Product ID:POLY(VINYL ACETATE), 346
MSDS Date:04/01/1992
FSC:6810
NIIN:00N049839
MSDS Number: BVJBB

Responsible Party
SCIENTIFIC POLYMER PRODUCTS INC
6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Contractor
SCIENTIFIC POLYMER PRODUCTS INC
ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MWG0

Ingredients

ACETIC ACID, VINYL ESTER, POLYMER; (POLY (VINYL ACETATE))

CAS: 9003-20-7

RTECS: AK0920000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT CONTAINS RESIDUAL VINYL
ACETATE MONOMER. REPEATED EXPOSURE TO HIGH CONCENTRATIONS OF VINYL
ACETATE PRODUCE EVIDENCE OF RESPIRATORY TRACT IRRITATION ON LAB
ANIMALS. VAPORS APPROXIMATELY 20 0 PPM & GREATER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM
EXPOSURE. IF BREATHING STOPS, BEGIN MOUTH TO MOUTH. EYES:FLUSH
W/WATER FOR AT LEAST 15 MINUTES. SKIN:WASH AFFECTED AREA W/SOAP &
WATER. REMOVE DIRTY CLOTHING.

Fire Fighting

Extinguishing Media:APPLY ALCOHOL-TYPE/ALL-PURPOSE TYPE FOAMS BY MFR'S
REC TECHNIQUES FOR LG FIRES. CO*2 OR DRY CHEM MEDIA FOR SM FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
DO NOT DIRECT SOLID STREAM OF WATER/FOAM INTO BURNING MOLTEN MATL;
THIS MAY CAUSE SPLATTERING & (SUPDAT)
Unusual Fire/Explosion Hazard:AVOID DISPERSION OF DUST IN AIR TO REDUCE
POTENTIAL FOR DUST EXPLOSION.

Accidental Release

Spill Release Procedures:SHOVEL SPILL & PLACE IN CONTAINER FOR REUSE OR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PRODUCT TENDS TO BLOCK OR SINTER IN
DIRECT PROPORTION TO TEMPERATURE & PRESSURE. STORE UNDER
REFRIGERATED CONDITIONS.
Other Precautions:THIS MATERIAL IS INTENDED FOR LABORATORY USE ONLY. IT
IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR, IF NEEDED.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
FIRE FIGHT PROC:SPREAD THE FIRE.

Chemical Properties

Solubility in Water:NIL
Appearance and Odor:SOLID; MILD CHARACTERISTIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BURNING CAN PRODUCE OXIDES OF CARBON.

Disposal

Waste Disposal Methods:BURN OR LANDFILL I/A/W STATE, FEDERAL & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.