BVLRR - ILFORD 2150 XL FIXER

  • MSDS: BVLRR
  • Manufacturer: ILFORD PHOTO
  • Product Name: ILFORD 2150 XL FIXER
  • National Stock Number: 6750-00N052130
Product Identification

Product ID:ILFORD 2150 XL FIXER
MSDS Date:07/21/1993
FSC:6750
NIIN:00N052130
MSDS Number: BVLRR

Responsible Party
ILFORD PHOTO
W. 70 CENTURY RD
PARAMUS, NJ 07653
US

Emergency Phone: 800-842-9660

Info Phone: 201-265-6000

Cage: IO762

Contractor
ILFORD PHOTO CORP
PARAMUS, NJ 07653 US

Telephone: 201-265-6000

Cage: 64145

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES & SKIN:MAY CAUSE
IRRITATION. INHALATION:LOW HAZARD UNDER TYPICAL USE CONDITIONS.
INGESTION:MAY IRRITATE GASTROINTESTINAL TRACT. CHRONIC:NOT KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. SKIN:WASH THORO W/SOAP & WATER. INGEST:IF CONSCIOUS,
DRINK 3-4 GLASSES OF WATER & DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION. INHA L:REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:NOT FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:DILUTE W/WATER & FLUSH TO SEWER. DISCHARGE,
TREATMENT/DISPOSAL MAY BE REGULATED BY FEDERAL, STATE OR LOCAL
LAWS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:TO USE PROD SAFELY, READ MSDS, LABELS
& INSTRUCTIONS & CARRY OUT APPROP PRECAUT. STORE IN COOL DRY AREA
AWAY FROM STRONG ACIDS/ALKALIS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECHANICAL:GOOD GENERAL VENT. 10-12 ROOM VOL. CHANGES PER
HR.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1.260 (H*20=1
pH:5.1
Evaporation Rate & Reference:SLOW
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS, TO LT. YELLOW - VINEGAR ODOR
Percent Volatiles by Volume:45(WT)

Stability

Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS OR STRONG ALKALI.
Hazardous Decomposition Products:OXIDES OF NITROGEN, SULFUR OR AMMONIA
GAS.

Disposal

Waste Disposal Methods:DILUTE W/WATER. FLUSH TO SEWER W/PLENTY OF WATER
IF PERMITTED BY APPLIC DISP REGS. MAY REQ DISP BY AN APPRVD
CONTRACTOR. DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.