BVMWT - C L P 10.75 OZ NET WT NO CFC'S, 90399
- MSDS: BVMWT
- Manufacturer: PREMIER INDUSTRIAL CORP
- Product Name: C L P 10.75 OZ NET WT NO CFC'S, 90399
- National Stock Number: 7930-00N052845
Product Identification
Product ID:C L P 10.75 OZ NET WT NO CFC'S, 90399
MSDS Date:07/21/1993
FSC:7930
NIIN:00N052845
MSDS Number: BVMWT
Responsible Party
CLEVELAND, OH 44103
US
Emergency Phone: 216-391-8300
Info Phone: 216-391-8300
Preparer: S.S.L.
Cage: 18399
Contractor
Telephone: 216-391-8300
Cage: 18399
Ingredients
HEPTANE
CAS: 142-82-5
RTECS: MI7700000
Fraction By Weight: 40-50%
OSHA PEL 500 PPM
ACGIH TLV: 400 PPM/500 PPM STEL
CYCLOHEXANE (SARA III)
CAS: 110-82-7
RTECS: GU6300000
Fraction By Weight: 100%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 20%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
ETHYL ALCOHOL; (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 10-15%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
ISOPROPYL ALCOHOL; (ISOPROPANOL)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM;500 PPM STEL
WHITE OIL
Fraction By Weight: 1-5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES EYE AND SKIN IRRITATION.
INHALATION CAUSES ACUTE IRRITATION OR EFFECTS TO RESPIRATORY
SYSTEM. EXCESS INHALATION MAY CAUSE DIZZINESS, GIDDINESS, AND
NAUSEA. MISUSE OR DELIBERATE INHALATION MAY B E HARMFUL OR FATAL.
REPEATED AND PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT
DAMAGE TO (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CENTRAL NERVOUS SYSTEM. POSSIBLE
CUMULATIVE OR IRREVERSIBLE EFFECTS TO LIVER AND URINARY SYSTEMS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINUTES & CALL
PHYSICIAN. SKIN:WASH THOROUGHLY W/PLENTY OF WATER & SOAP. INHAL:IF
AFFECTED, REMOVE TO FRESH AIR, ADMINISTER OXYGEN & CALL PHYSICIAN.
INGE ST:SEE PHYSICIAN IMMEDIATELY, SHOW MSDSOR LABEL. DO NOT INDUCE
VOMITING.
Fire Fighting
Flash Point:-156F,-104C
Lower Limits:1.1%
Upper Limits:19.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED
SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPOSURE TO FIRE, HEAT OR PROLONGED
SUNLIGHT MAY CAUSE BURSTING. CONTACT WITH FLAME OR HOT SURFACES MAY
PRODUCE TOXIC GASES. HIGH EXPLOSIVE POWER.
Accidental Release
Spill Release Procedures:VENTILATE AREA. CLEAN UP W/ABSORBENT MATERIAL.
CONTAIN & PICK UP WASTE MATERIALS. PUT IN A SEALED APPROVED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CONTACT W/FLAME/HOT SURFACES MAY
PRODUCE TOXIC GASES. KEEP AWAY FROM HEAT & FLAME. USE ONLY W/ADEQ
VENT. AVOID PRLNGD/RPTD BRTHG OF GAS, (SUPP DATA)
Other Precautions:KEEP OUT OF REACH OF CHILDREN. ALWAYS READ & FOLLOW
DIRECTIONS ON PROD LABEL. ADDITIONAL TECHNICAL DATA SHEETS &/OR
MSDS'S ARE AVAILABLE UPON REQUEST. FOR PROFESSIONAL & INDUSTRIAL
USE ONLY.
Exposure Controls
Respiratory Protection:USE ONLY IN WELL VENTILATED AREAS. USE
NIOSH/MSHA APPROVED RESPIRATORY EQUIPMENT .
Ventilation:LOCAL AND MECHANICAL RECOMMENDED.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HNDLG/STOR PREC:FUMES, VAPOR OR SPRAY MIST. AVOID PROLONGED OR REPEATED
CONTACT W/SKIN.
Chemical Properties
Boiling Pt:B.P. Text:-44F,-42C
Melt/Freeze Pt:M.P/F.P Text:-128F,-89C
Vapor Pres:8.6
Vapor Density:1.6(AIR=1)
Spec Gravity:0.67
Evaporation Rate & Reference:<1 (ETHER=1).
Solubility in Water:20%.
Appearance and Odor:CLEAR LIQUID AEROSOL WITH HYDROCARBON ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:IMPACT SENSITIVE.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS. DO NOT PUNCTURE, INCINERATE (OR BURN)
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.