BVNVF - RX2-501N
- MSDS: BVNVF
- Manufacturer: ROGERS CORP
- Product Name: RX2-501N
- National Stock Number: 5970-00N049208
Product Identification
Product ID:RX2-501N
MSDS Date:08/28/1989
FSC:5970
NIIN:00N049208
MSDS Number: BVNVF
Responsible Party
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 203-774-9605
Preparer: TIMOTHY B. GAUTHIER
Cage: 04394
Contractor
Telephone: 203-774-9605
Cage: 04394
Ingredients
<7 MICROMETERS)
CAS: 65997-17-3
Fraction By Weight: <50%
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3 DUST
ANATASE; (TITANIUM DIOXIDE)
CAS: 1317-70-0
RTECS: BV6550000
Fraction By Weight: <3%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST WILL CAUSE NOSE & THROAT
IRRITATION. PRODUCT DUST WILL BE MODERATELY IRRITATING TO EYES &
IRRITATING TO SKIN UPON REPEATED OR PROLONGED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
IF BREATHING HAS STOPPED. EYE:FLUSH W/LARGE AMOUNT OF WATER FOR AT
LEAST 15 MINUTES. SEE MD IF IRRITATION PERSISTS. SKIN:WASH AFFECTED
AREA S W/SOAP & WATER. SEE MD IF IRRITATION PERSISTS. INGEST:SEEK
MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:WATER FOG, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AVOID BREATHING FUMES GENERATED IN A
FIRE.
Accidental Release
Spill Release Procedures:SWEEP UP & RETURN SPILL TO CONTAINER SUITABLE
FOR RECOVERY OR DISPOSAL. KEEP DUST TO A MINIMUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE INDOORS AT TEMPERATURES NOT TO
EXCEED 200F. FOR PRODUCT USEFULNESS STORE BELOW 75F. AVOID
BREATHING FUMES FROM MOLDING OR HEATING OPERATIONS.
Other Precautions:AVOID BREATHING DUSTS FROM CUTTING, MACHINING OR
DEBURRING OPERATIONS. AVOID HIGH CONCENTRATIONS OF DUST IN AIR &
ACCUMULATION OF DUST ON EQUIPMENT. A FINE DUST OF THIS MATERIAL CAN
CREATE A DUST EXPL OSION HAZARD.
Exposure Controls
Respiratory Protection:WEAR SUITABLE NIOSH/MSHA APPROVED RESPIRATOR OR
EQUIVALENT WHERE EXPOSURE LIMITS ARE EXCEEDED.
Ventilation:LOCAL EXHAUST:MECHANICAL LOCAL EXHAUST VENTILATION AT POINT
OF CONTAMINANT RELEASE.
Protective Gloves:COTTON OR CANVAS GLOVES.
Eye Protection:SAFETY GLASSES(ANSI Z87.1/APPRVD EQUIV).
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING & WASH AFFECTED
SKIN AREAS W/SOAP & WATER. WASH CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Vapor Pres:NEGLIG@20C
Spec Gravity:1.6-1.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRANULAR OR FLAKES; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE AT NORMAL USE CNDTNS; OXIDES OF
CARBON &/OR AROMATIC HYDROCARBONS MAY BE GENERATED ON EXPOS TO HIGH
TEMPS.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. CONTAINER DISPOSAL:SAME.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.