BVNXV - AIRBLOWN ASPHALT TYPE III
- MSDS: BVNXV
- Manufacturer: SAN JOAQUIN REFINING CO INC
- Product Name: AIRBLOWN ASPHALT TYPE III
- National Stock Number: 5610-00N051056
Product Identification
Product ID:AIRBLOWN ASPHALT TYPE III
MSDS Date:06/18/1987
FSC:5610
NIIN:00N051056
MSDS Number: BVNXV
Responsible Party
US
Emergency Phone: 805-327-4257
Info Phone: 805-327-4257
Cage: 7E948
Contractor
Telephone: 805-327-4257
Cage: 7E948
Ingredients
ASPHALT OXIDE; (ASPHALT)
CAS: 64742-93-4
Fraction By Weight: >99%
OSHA PEL N/K
ACGIH TLV: N/K
FERRIC CHLORIDE (SARA III)
CAS: 7705-08-0
RTECS: LJ9100000
Fraction By Weight: <0.5%
OSHA PEL 1 MG/M3 (FE)
ACGIH TLV: 1 MG/M3 (FE)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN:COOL MATL IS NOT EXPECTED TO
CAUSE IRRITATION. THERMAL BURNS MAY RESULT FROM CONTACT W/HOT MATL.
INGEST:NOT EXPECTED TO BE ACUTELY TOXIC. INHAL:FUMES FROM HOT MATL
MAY BE UNPLEASANT & MAY PR ODUCE NAUSEA & IRRITATION OF UPPER
RESPIRATORY TRACT. INHALATION OF HIGH CONCENTRATIONS MAY CAUSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DIZZINESS, HEADACHE OR NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . INGEST:DO NOT INDUCE VOMITING,
CALL MD. INHAL:REMOVE PERSON TO FRESH AIR IF RESPIRATORY DISCOMFORT
O CCURS. SKIN:IF SPLASHED ON SKIN, COOL W/WATER. DO NOT USE
SOLVENTS OR THINNERS TO REMOVE. IT CAN BE REMOVED USING PETROLEUM
JELLY.
Fire Fighting
Flash Point Method:COC
Flash Point:>450F,>232C
Extinguishing Media:FOAM, WATER FOG, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . SEE HAZARDOUS DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CLEAN UP USING ABSORBENT MATERIAL, SUCH AS
EARTH OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID FIRE, SPARKS, OPEN FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRATIONS WHICH EXCEED EXPOSURE STANDARD, USE OF NIOSH/MSHA
APPROVED RESPIRATOR FOR ORGANIC VAPORS OR AIR SUPPLIED BREATHING
EQUIPMENT IS RECOMMENDED.
Ventilation:USE ADEQUATE VENT TO KEEP AIRBORNE CONCENTRATIONS OF THIS
MATL BELOW ADEQUATE EXPOSURE STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:AVOID SKIN CONTACT W/HOT MATERIAL BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:PRODUCE CARBON MONOXIDE.
Chemical Properties
Boiling Pt:B.P. Text:>650F,>343C
Spec Gravity:1.02 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:BLACK, SEMI-SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CARBON DIOXIDE &
WATER VAP & MAY PRDCE OXIDES OF SULFUR & NITROGEN. INCOMPLETE
COMBUST CAN (SUPDAT)
Disposal
Waste Disposal Methods:OBSERVE FEDERAL, STATE & LOCAL REGULATIONS
COVERING CHEMICAL WASTE SPILLS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.