BVRBG - RELY-ON ACRYLIC LATEX CAULK, 10101
- MSDS: BVRBG
- Manufacturer: DAP INC
- Product Name: RELY-ON ACRYLIC LATEX CAULK, 10101
- National Stock Number: 8030-00N053710
Product Identification
Product ID:RELY-ON ACRYLIC LATEX CAULK, 10101
MSDS Date:09/28/1988
FSC:8030
NIIN:00N053710
MSDS Number: BVRBG
Responsible Party
US
Emergency Phone: 800-543-3840, 513-253-7154
Info Phone: 800-543-3840, 513-253-7154
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
TRADE SECRET COMPONENTS
OSHA PEL N/K
ACGIH TLV: N/K
5 G/L VOC
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONTACT MD. SKIN: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. CONTACT MD IMMEDIATELY. INGESTION: DO NOT
INDUCE VOMITING. CONTACT MD OR REGIONAL POISON CONTROL CENTER
IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:NONE
Extinguishing Media:FOAM, WATER, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL EXPOSED SURFACES.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SCRAPE UP DRIED MATERIAL AND PLACE INTO
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP
CONTAINERS FROM EXCESSIVE HEAT AND FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NONE REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
USERS OF L VERSION OF HMIS SHOULD CONSULT LR VERSION FOR ADDITIONAL
INFORMATION .
Chemical Properties
HCC:N1
Spec Gravity:1.62 (H*2O=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE PASTE WITH A MILD ODOR.
Percent Volatiles by Volume:<25
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS, I.E.,
CO*X, NO*X.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . THIS PRODUCT IS NON-HAZARDOUS
ACCORDING TO U.S. EPA'S HAZARDOUS WASTE MANAGEMENT REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.