BVRJC - 1650-SERIES ACRY-PLEX LATEX SEMI-GLOSS ENAMEL
- MSDS: BVRJC
- Manufacturer: KELLY MOORE PAINT CO INC
- Product Name: 1650-SERIES ACRY-PLEX LATEX SEMI-GLOSS ENAMEL
- National Stock Number: 8010-00F007449
Product Identification
Product ID:1650-SERIES ACRY-PLEX LATEX SEMI-GLOSS ENAMEL
MSDS Date:09/13/1993
FSC:8010
NIIN:00F007449
MSDS Number: BVRJC
Responsible Party
SAN CARLOS, CA 94070-5000
US
Emergency Phone: 415-592-8337
Info Phone: 415-592-8337
Cage: KELLY
Contractor
Telephone: 415-592-8337
Cage: KELLY
Ingredients
PROPANOIC ACID, 2-METHYL, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
HEXYLENE GLYCOL, 2-METHYL-2,4-PENTANEDIOL
CAS: 107-41-5
RTECS: SA0810000
Fraction By Weight: <5%
ACGIH TLV: C 21 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO UPPER RESPIRATORY TRACT,
SKIN & EYES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, HEADACHE, NAUSEA, CONFUSION,
IRRITATION & UNCONSCIOUSNESS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. EYES:
FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WIPE OFF W/A RAG. WASH
THOROUGHLY W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:>200F
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
BUILD UP OF STEAM PRESSURE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA TO PREVENT BUILD UP OF VAPORS.
SMALL: SOAK UP W/ABSORBANT. LARGE: DIKE AREA W/ABSORBENT MATERIAL &
SCOOP UP LIQUIDS.
Handling
Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT & FLAME.
Exposure Controls
Respiratory Protection:USE A PARTICLE MASK (NIOSH/MSHA TC-21C) TO AVOID
BREATHING SPRAY MIST/SANDING DUST. WEAR A SUITABLE, PROPERLY FITTED
RESPIRATOR (NIOSH/MSHA TC-23C/BETTER) FOR ORGNAIC VAPORS W/A DUST
FILTER AS NEEDED.
Ventilation:LOCAL CROSS VENTILATION/MECHANICAL EXHAUST SUFFICIENT TO
KEEP VAPOR CONCENTRATIONS BELOW PRESCRIBED LIMITS.
Protective Gloves:REQUIRED
Eye Protection:GLASSES W/SIDE SHIELDS/GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Density:<1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65-75
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT.
Disposal
Waste Disposal Methods:DISCARD IN LANDFILL IN SEALED METAL CONTAINERS
AWAY FROM HEAT & FLAME IAW/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.