Product ID:F-150 SERIES GREEN EPOXY POLYAMIDE PRIMER
MSDS Date:01/29/1992
FSC:8010
NIIN:00-410-8452
Kit Part:Y
MSDS Number: BVWXJ

PRO-LINE PAINT CO

2646 MAIN STREET
SAN DIEGO, CA 92113-3613
US

Emergency Phone: 619-728-3192

Info Phone: 619-728-3192

Cage: 9D157

PRO-LINE PAINT CO

SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 24.07%

RHEOLOGICAL ADDITIVES

Fraction By Weight: 0.31%

NAPHTHA, LIGHT AROMATIC (XYLENE, 2-5%, TRIMETHYL BENZENE

CAS: 64742-95-6

Fraction By Weight: 10.67%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM 9091

MAGNESIUM SILICATE

CAS: 1480-96-6

Fraction By Weight: 4.47%

SILICONE DIOXIDE

CAS: 68855-54-9

Fraction By Weight: 6.69%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NAUSEA, DIZZINESS, HEADACHE AND
CONVULSIONS. CHRONIC: POSSIBLE SKIN SENSITIZATION.
Explanation of Carcinogenicity:THIS PRODUCTS INGREDIENTS ARE NOT FOUND
IN NTP, IARC OR OSHA'S LIST.
Effects of Overexposure:INHALED-COUGHING, SHORTNESS OF BREATH, MAY
CAUSE DIZZINESS. CONTACT WITH SKIN OR EYES-BURNING SENSATION, RASH
BREAKOUT WITH SKIN TURNING PINK AND REDNESS OF EYES. ABSORBED
THROUGH SKIN-SKIN RASH MAY C AUSE BURNING OF SKIN INFLAMMATION.
SWALLOWED-VOMITING DUE TO UNPLESANT TASTE. MAY CAUSE DIARRHEA OR
STOMACH CRAMPS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA AND OTHER
RESPIRATORY DISEASE.

First Aid:EYE-FLUSH IMMEDIATELY WITH FRESH WATER BY AN EYE WASH
APPARATUS OR BY HAND. SEEK MEDICAL ATTENTION. SKIN-WASH IMMEDIATELY
WITH WATER. THEN WASH WITH SOAP & WATER, RINSE IMMEDIATELY. SEEK
MEDICAL ATTEN TION.INHALED-MOVE PERSON TO FRESH AIR; ARTIFICIAL
RESPIRATION IF NECESSARY. SEEK MEDICAL ATTENTION. SWALLOWED-SEEK
MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:101F,38C
Autoignition Temp:Autoignition Temp Text:UNKNON
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:BLANKET FLAME WITH ONE OF THE ABOVE. DO NOT
ENTER FIRE AREA WITHOUT PROPER PROTECTION & EQUIPMENT INCLUDING
NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS &
OPEN FLAMES. EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE
WHEN EXTINGUISHING.

Spill Release Procedures:REMOVE ALL TYPES OF IGNITION. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEANUP MAN WITH 8540 3M CORP NIOSH
APPROVED RESPIRATOR, GOGGLES AND RUBBER GLOVES. (NOTE RESPIRATORY
PROTECTION SECTION).

Handling and Storage Precautions:KEEP IN DRY AREA AT ROOM TEMPERATURE,
77F PLUS OR MINUS 5 DEGREES. PREVENT CANS FROM CORROSION &
COSEQUENTLY, SPILLAGE.
Other Precautions:WASH CONTAMINATED EQUIPMENT WITH FRESH WATER.
***RECOMMENDATIONS TO PHYSICIANS: CONSULT WITH THE POISON CONTROL
CENTER. FOR WORKERS WHO ARE EXPOSED REGULARLY, PROVIDE DETAILED
PERIODIC EXAMINATIONS.** *

Respiratory Protection:USE ORGANIC VAPOR CARTRIDGE, &/OR ACID GASES
E.G. 8540 3M CORP RESPIRATOR, (NIOSH APPROVED). WHEN USING IN
CONFINED AREA, USE AIR-FED HOOD.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING MATERIAL IN CONFINED AREAS.
KEEP VAPOR BELOW TLV.
Protective Gloves:RUBBER GLOVES.
Eye Protection:GOGGLES WITH SIDE SHIELD.
Other Protective Equipment:USE PROTECTIVE CLOTHING AND CHANGE
CONTAMINATED CLOTHING IMMEDIATELY. PROVIDE EMERGENCY SHOWERS &
EYEWASH FOUNTAINS.
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES IN THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health
REPORTS HAVE SHOWN THAT ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS CAN CAUSE PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING THE CONTENTS MAY BE HARMFUL ORFATAL. USE ONLY WITH
ADEQUATE VENTILATION.

HCC:F4
Boiling Pt:B.P. Text:244F,118C
Melt/Freeze Pt:M.P/F.P Text:128F,53C
Vapor Pres:4.8
Vapor Density:2.1
Spec Gravity:1.3
Evaporation Rate & Reference:0.43 (N-BUTYL ACETATE=1)
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPERANCE WITH STRONG SOLVENT ODOR
TYPICAL OF BUTANOL.

Stability Indicator/Materials to Avoid:YES
WHEN "A" AND "B" ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A
RAPID CHEMICAL REACTION. EMITS HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPOR TO ACCUMULATE.
Hazardous Decomposition Products:COMBUSTIBLE FUMES MAY ACCUMULATE IN
CONFINED AREA & SPARKS OR OPEN FLAMES MAY IGNITE IT
Conditions to Avoid Polymerization:HEAT, SPARKS AND OPEN FLAMES WHEN A
& B ARE MIXED.

Waste Disposal Methods:USE ANY KIND OF ABSORBENT TO ABSORB SPILLED
MATERIAL AND PUT IN A METAL CONTAINER MARKED "DO NOT USE THIS
MATERIAL". DISPOSE OF LEGALLY. DISPOSE OF ALL WASTE IN ACCORDANCE
WITH FEDERAL, STATE AND LOCA L REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.