BVYJW - #37030 BLACK URETHANE COATING, PART A

  • MSDS: BVYJW
  • Manufacturer: HENTZEN COATINGS INC
  • Product Name: #37030 BLACK URETHANE COATING, PART A
  • National Stock Number: 8010-01-260-0914
Product Identification

Product ID:#37030 BLACK URETHANE COATING, PART A
MSDS Date:10/06/1994
FSC:8010
NIIN:01-260-0914
Kit Part:Y
MSDS Number: BVYJW

Responsible Party
HENTZEN COATINGS INC
6937 W MILL ROAD
MILWAUKEE, WI 53218-1225
US

Emergency Phone: 414-353-4200

Info Phone: 414-353-4200 / FAX 414-353-0286

Preparer: JANE FREEMAN

Cage: 09225

Contractor
HENTZEN COATINGS INC
18749 MILWAUKEE, WI 53218 US

Telephone: 414-353-4200

Cage: 09225

Ingredients

METHYL N-AMYL KETONE (SOLVENT)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 21.473%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM


BLACK IRON OXIDE (PIGMENT) (EXPOSURE LIMITS ARE FOR IRON

CAS: 1317-61-9

Fraction By Weight: 5-10%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3


SILICA (PIGMENT)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 40-50%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3


2-BUTOXYETHYL ACETATE (ETHYLENE GLYCOL BUTYL ETHER ACETATE)

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 1.789%


METHOXYPROPANOL ACETATE (SOLVENT)

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 5.078%


POLYESTER RESIN

CAS: 85959-88-2

Fraction By Weight: 10-15%


XYLENE (SARA III) (SOLVENT)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2.166%

OSHA PEL 100 PPM;STEL 150 PPM

ACGIH TLV: 100 PPM;STEL 150 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


3.812 LBS/GAL; 456.791 GRAMS/LITER

RTECS: 9999999VO

Hazards

Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:CHRONIC: REPORTS ASSOCIATE REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE, LIVER & KIDNEY DAMAGE. MAY CAUSE
LUNG INJURY IF RESPIRATORY PRECAUTI ONS ARE NOT USED.
Explanation of Carcinogenicity:BASED ON ANIMAL DATA, IARC HAS LISTED
SILICA AS PROBABLE HUMAN CARCINOGEN.
Medical Cond Aggravated by Exposure:ASTHMA AND OTHER RESPIRATORY
AILMENTS; CHEMICAL SENSITIZATION.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM & QUIET. NOTIFY A PHYSICIAN. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. TAKE TO
PHYSICIAN FOR M EDICAL TREATMENT. SKIN: WASH AFFECTED AREAS WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. CONSULT A PHYSICIAN.
INGESTION: IF SWALLOWED, CALL A PHYSICIAN OR POISON CONTROL CENTER
IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:79.0F,26.1C
Lower Limits:0.9
Upper Limits:8.5
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP INCLUDING SCBA.
WATER SPRAY MAY BE INEFFECTIVE, USE TO COOL (FOG NOZZLES) FIRE
EXPOSED CNTNRS(PREVENT PRESSR BLDUP,AUTOIGNIT,EXPLOSION
Unusual Fire/Explosion Hazard:KEEP CNTNRS CLSD.KEEP FROM HEAT/IGNIT
SOURCE.CLSD CNTNR MAY EXPLODE W/HEAT.DON'T APPLY TO HOT SRFCS.NEVER
USE WELD/CUT TORCH ON/NEAR DRUM-EVEN EMPTY-CAN EXPLODE

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, AND ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. CONTAIN AND REMOVE WITH INERT
ABSORBENT AND NONSPARKING TOO LS.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LRG QTY IN
BLDG DESIGNED TO COMPLY W/OSHA 1910.106. KEEP AWAY FROM SPARKS/OPEN
FLAME. DON'T INGEST.GROUND CNTNR WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQUID ABOVE A FEW INCHES. USE W/
VENT & RESPIRATORY EQUIP. AVOID BREATHING VAPOR/SPRAY MIST. AVOID
PROLONGED OR REPEATED SKIN CONTACT. EMPTIED CNTNR RETAIN RESIDUE.
FOLLOW HZD PREC AUTIONS TILL CNTNR CLEANED OR DESTROYED.

Exposure Controls

Respiratory Protection:SPRAYED IN OUTDOOR/OPEN AREA OR SAND/GRINDING,
USE NIOSH MECHAN FILTER RESPRTR (RMV SOLID PARTICLES). RESTRICTED
AREA, WEAR NIOSH CHEM/MECHAN FILTER. CONFINED AREA, NIOSH AIR
SUPPLIED RSPRTR/HOOD. USE NIOSH RSPRTR WHEN CUT/WELD HAZING TORCH
Ventilation:GEN DILUTN/LOCAL EXHAUST TO KEEP CONTAM CONCAPPLIC,CURING.REMOVE DECOMP FROM WELDING/FLAME CUT COATD SRF
Protective Gloves:REQ'D FOR PROLONGED OR REPEATED CONTACT
Eye Protection:SAFETY EYEWEAR W/SPLSH GUARDS/SIDE SHLDS
Other Protective Equipment:USE PROTECTIVE SKIN CREAM WHERE CONTACT IS
LIKELY. PREVENT PROLONGED SKIN CONTACT WITH CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE. WASH
HANDS BEFORE EATING OR SMOKING. SMOKE IN DESIGNATED AREAS ONLY.
Supplemental Safety and Health

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:277 TO 372F
Decomp Temp:Decomp Text:400F,204C
Vapor Pres:9.00 @ 68F
Vapor Density:> AIR
Spec Gravity:1.45
Viscosity:70 - 85 KU
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:NEGLIBLE
Appearance and Odor:OPAQUE LIQUID WITH SOLVENT ODOR
Percent Volatiles by Volume:53.81

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY CONTAIN CO & CO2 &
TOXIC VAPORS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
INCINERATE IN AN APPROVED FACILITY.

======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.