Product ID:LIGHT WEIGHT 3 LIGHTWEIGHT BODY FILLER, 158
MSDS Date:11/02/1993
FSC:8030
NIIN:00N055166
MSDS Number: BVZCV

FIBREGLASS EVERCOAT CO INC

6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-729-7600

Cage: FIBRE

FIBREGLASS EVERCOAT CO INC

CINCINNATI, OH 45242-5000 US

Telephone: 800-729-7600

Cage: FIBRE

4.5.

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM;100 STEL, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 40-45%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CONTACT W/LIQUID OR VAPOR
MAY RESULT IN IRRITATION, REDNESS, TEARING & BLURRED VISION.
SKIN:CONTACT W/WET MATERIAL MAY RESULT IN IRRITATION, DERMATITIS &
POSSIBLE DEFATTING OF SKIN. INHAL:E XCESSIVE INHALATION OF VAPORS
MAY CAUSENASAL & RESPIRATORY IRRITATION, ACUTE NERVOUS SYSTEM
DEPRESS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
7, PG 345, 1987:GRP 2B.(ANIMAL LUNG CARCINOGEN)
Effects of Overexposure:HLTH HAZ:FATG, WEAK, NAUS, HDCH & DIZZ.
INGEST:INGEST OF THIS MATL MAY CAUSE GI IRRIT, NAUS, DIARR & VOMIT.
ASPIR OF MATL INTO LUNGS DUE TO VOMIT MAY PRODUCE CHEM PNEUM WHICH
CAN BE FATAL. CHRONIC:EXC ESSIVE OVEREXP TO STYRENE HAS BEEN FOUND
TO CAUSE FOLLOWING EFTS IN LAB ANIMALS:LIVER ABNORMS, KIDNEY DMG &
LUNG DMG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH IMMED W/LG AMTS OF WATER FOR AT LST 15 MINS. SEE
MD FOR MED TREATMENT. SKIN:IMMED WASH AFFECTED AREA W/SOAP & WATER.
REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT DEVELOPS. INHAL:REMOVE
PERSON T O FRESH AIR. RESTORE BRTHG. KEEP PERSONWARM & QUIET. TREAT
SYMPTOMATICALLY. GET MED ATTN. INGEST:DRINK 1-2 GLASSES OF WATER TO
DILUTE. KEEP PERSON WARM & QUIET. CONSULT MD/POIS CTL CTR IMMED.

Flash Point:88.0F,31.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO PREVENT
PRESSURE BUILD-UP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG FLOOR
& BE IGNITED BY SPKS/FLAMES AT DIST FROM WHERE MATL IS BEING USED.
POLYMERIZATION OF MATL MAY OCCUR UNDER FIRE(SUPDAT)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
SPILL, ABSORB EXCESS W/DRY INERT MATERIAL, REMOVE & DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATL IN COOL, WELL-VENTILATED
AREA. DO NOT STORE AT TEMPS >75F. DO NOT USE/STORE NEAR HEAT,
SPARKS/OPEN FLAME. KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:THIS MATL MUST BE CATALYZED PRIOR TO USE. WET MATL
WILL HAVE HAZARD PROPERTIES OF BOTH COMPONENTS. PLEASE REFER TO
MSDS FOR CATALYST. IF PROD IS TO BE SANDED, PEL/TLV OF 10 MG/M3 FOR
NUISANCE DUSTS SH OULD BE OBSERVED. KEEP OUT OF (SUPDAT)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATE MATTER & ORGANIC SOLVENT VAPORS.
Ventilation:GENERAL DILUTION/LOC EXHST VENT SHOULD BE PROVIDED TO KEEP
EXPOS BELOW ACCEPT LIMS & TO KEEP SOLV VAPS BELOW LEL.
Protective Gloves:NEOPRENE OR NATURAL RUBBER GLOVES.
Eye Protection:ANSI APPRVD SPLASH GOGGLES .
Other Protective Equipment:PROPER CLTHG SHOULD BE WORN TO PVNT SKIN
CONT. IMPERMEABLE CLTHG SHOULD BE WORN TO PVNT PRLNG/RPTD CONT OF
WET (SUPDAT)
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL &
BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
EXPLO HAZ:CNDTNS. POLYMERIZATION OF MATL IN CLSD CNTNR CAN CREATE PRESS
BUILD-UP WHICH MAY CAUSE RUPTURE OF CNTNR. HAZ DECOMP PROD:VARIOUS
HYDROCARBONS. OTHER PREC:REACH OF CHILDREN. DO NOT TAKE INTER
NALLY. AVOID CONT W/EYES & SKIN. OTHER PROT EQUIP:MATL W/SKIN.

HCC:F4
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.19
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS, STRONG BASES &
POLYMERIZATION CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURE, IGNITION SOURCES &
CONTACT W/INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:HAZ FUMES MAY BE PRDCD WHEN MATL IS
HEATED TO DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE
& (SUPP DATA)
Conditions to Avoid Polymerization:HIGH TEMPERATURE, IGNITION SOURCES &
CONTACT W/INCOMPATIBLE MATERIALS.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. BEFORE ATTEMPTING CLEAN-UP OR DISPOSING OF MATERIAL,
REFER TO HAZARD INFORMATION IN OTHER SECTIONS OF THIS MSDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.