Product ID:XUPER 680 CGS,680 CGS 1/8
MSDS Date:03/31/1993
FSC:3439
NIIN:01-019-0694
MSDS Number: BVZHZ

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3 (FE2O3)

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 10 - 20%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 5 - 10%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

FELDSPAR

CAS: 68476-25-5

SODIUM SILICATE

CAS: 1344-09-8

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1 - 5%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9394

BARIUM CARBONATE

CAS: 513-77-9

RTECS: CQ8600000

Fraction By Weight: 1 - 5%

OSHA PEL 5 MG BA/M3

ACGIH TLV: 2 MG BA/M3

CALCIUM FLUORIDE (AS F)

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 AS F

ACGIH TLV: 2.5 MG/M3 AS F

ZINC COBALT ALUMINATE (COBALT BLUE)

CAS: 1345-16-0

Fraction By Weight: 1 - 5%

POTASSIUM SILICATE

CAS: 1312-76-1

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT RELEVANT.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:EYES, SKIN, LUNGS.
ACUTE- OVEREXPOSURE TO WELDING FUMES MAY CAUSE DIZZINESS,
IRRITATION OF NOSE, THROAT, EYES & LUNG DAMAGE. INGESTION IS
HARMFUL. ARC RAYS & UV LIGHT CAN INJURE EYES & B URN SKIN.
ELECTRICAL SHOCK CAN KILL. CHRONIC- OVEREXPOSURE MAY LEAD TO METAL
FUME FEVER & MAY AFFECT PULMONARY FUNCTION.
Explanation of Carcinogenicity:CONTAINS CHROMIUM AND NICKEL.
Effects of Overexposure:EYES AND UPPER RESPIRATORY TRACT IRRITATION,
DIZZINESS, NAUSEA, SKIN BURN, COUGH, HEADACHE
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS OR IMPAIRED RESPIRATORY FUNCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.

First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. EMPLOY FIRST AID
TECHNIQUE RECOMMENDED BY RED CROSS. IF BREATHING IS DIFFICULT,
PROVIDE OXYGEN/CPR. FOR ELECTRIC SHOCK, DISCONNECT POWER. FOR ARC
BURNS, APPL Y COLD, CLEAN COMPRESSES & CALL A PHYSICIAN. IF EYE
CONTACT, FLUSH WITH WATER FOR 15 MINUTES. IF INGESTED, CALL
PHYSICIAN/POISON CONTROL CENTER. IF SKIN CONTACT, WASH WITH SOAP &
WATER.

Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE, SAND, FOAM/DRY CHEMICAL.
Fire Fighting Procedures:TREAT AS A METALLIC FIRE. WEAR PROTECTIVE
CLOTHING & NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS.
HYDROGEN CHLORIDE, PHOSGENE & CHLORINE MAY BE PRESENT.
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A
FIRE/EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS (PARTICLE SIZE &
STRONG IGNITION SOURCE). WELDING ARC CAN IGNITE COMBUSTIBLES.

Spill Release Procedures:VACUUM OR SWEEP UP AND PLACE IN A CONTAINER
FOR CHEMICAL WASTE. CLEAN SURFACE THOROUGHLY TO REMOVE RESIDUAL
CONTAMINATION. DO NOT RAISE DUST.
Neutralizing Agent:NOT RELEVANT

Handling and Storage Precautions:STORE IN A DRY PLACE AWAY FROM ACIDS.
Other Precautions:FUMES & GASES CAN BE DANGEROUS TO YOUR HEALTH. AVOID
BREATHING FUMES. USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY
AFTER HANDLING AND BEFORE EATING AND DRINKING. REMOVE CONTAMINATED
CLOTHING. LAUNDE R BEFORE REUSE. READ & UNDERSTAND LABEL.

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
PROTECTION OR RESPIRABLE FUME/DUST RESPIRATOR WHEN WELDING OR
SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENTILATION
DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE GENERAL & LOCAL EXHAUST AT FLAME TO KEEP FUMES AND
GASES BELOW TLV'S IN THE WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:FLAME-PROOF WELDING GLOVES
Eye Protection:SAFETY GLASSES UNDER WELDING HELMET
Other Protective Equipment:EYE WASH STATION, SAFETY SHOWER, WORK
CLOTHING, APRON FOR WELDING AND EAR PROTECTION (TO AVOID EXCESSIVE
NOISE)
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES.
Supplemental Safety and Health
FORMULA CHANGED. FOR PREVIOUS FORMULATION, SEE PNI A UNDER THE SAME
NSN.

HCC:T6
NRC/State Lic Num:NOT RELEVANT
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Appearance and Odor:SOLID - NO ODOR

Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:STRONG IGNITION SOURCES, WELDING ARCS
Hazardous Decomposition Products:SOME FLUXES & CHEMICAL AIDS MAY GIVE
OFF HYDROGEN CHLORIDE, PHOSGENE & CHLORINE GASES. OXIDES OF METALS
MAY BE FORMED.

Waste Disposal Methods:PRIOR TO DISPOSAL, CONSIDER IF MATERIAL HAS
RECOVERY VALUE. EMPTY PRODUCT CONTAINERS, PROUCT WASTE AND CLEANING
MEDIA SHOULD BE DISPOSED OF IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS. PREVENT WASTE FROM CONTAMINATING ENVIRONMENT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.