BWBMQ - KLEAN-LITE TORCH FUEL, 1210

  • MSDS: BWBMQ
  • Manufacturer: W M BARR AND CO
  • Product Name: KLEAN-LITE TORCH FUEL, 1210
  • National Stock Number: 9140-00N055627
Product Identification

Product ID:KLEAN-LITE TORCH FUEL, 1210
MSDS Date:10/01/1985
FSC:9140
NIIN:00N055627
MSDS Number: BWBMQ

Responsible Party
W.M. BARR & CO
2105 CHANNEL AVE
MEMPHIS, TN 38101
US

Emergency Phone: 901-775-0100

Info Phone: 901-775-0100

Cage: IO929

Contractor
W.M. BARR & COMPANY/KLEAN-STRI, DIVISION OF
1879 MEMPHIS, TN 38101 US

Telephone: 901-775-0100

Cage: 91522

Ingredients

10 @ 68F.

CAS: 8008-20-6

RTECS: OA5500000

Fraction By Weight: <100%

OSHA PEL N/K

ACGIH TLV: N/K


CITRONELLA OIL

CAS: 8000-29-1

RTECS: GE8750000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: MAY CAUSE HEADACHE,
ANXIETY, DIZZINESS, FATIGUE AND NAUSEA. INGESTION: MAY BE HARMFUL
OR FATAL IF INGESTED. MAY CAUSE GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING, DROWSINESS, INCR EASED PULSE RATE AND DYSPNEA.
SKIN: NOTDETERMINED. EYE: MAY CAUSE IRRITATION. MAY CAUSE CONJUNCT
OF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: EYES. CHRONIC: PROLONGED OR
REPEATED CONTACT MAY CAUSE DERMATITIS. REPORTS HAVE ASSOCIATED
REPEATED AND PROLONGED OVEREXPOSURE TO SOLVENTS WITH NEUROLOGICAL
AND OTHER PHYSIOLOGICAL DAM AGE.
Medical Cond Aggravated by Exposure:NONE RECOGNIZED.

First Aid

First Aid:INHAL: IF USER EXPERIENCES BRTHG DFCLTY, MOVE TO AIR FREE OF
VAPORS. ADMIN OXYGEN OR ARTF RESP UNTIL MEDICAL ASSISTANCE CAN BE
RENDERED. INGESTION: DO NOT INDUCE VOMITING. CALL YOUR POISON
CONTROL CEN TER, HOSPITAL EMERGENCY ROOM OR PHYSICIAN IMMEDIATELY.
SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH LARGE QTYS OF WATER
FOR AT LST 15 MINS. IF IRRIT FROM CONT PERSISTS, GET MEDICAL
ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:133F,56C
Lower Limits:0.7%
Extinguishing Media:USE CARBON DIOXIDE, DRY POWDER OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . STORAGE CNTNRS EXPOS TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY TO PVNT PRESS BUILD-UP.
Unusual Fire/Explosion Hazard:KEEP CONTAINER TIGHTLY CLOSED. ISOLATE
FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN FLAMES AND HOT
SURFACES.

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS. VENTILATE AREA. FLUSH
LARGE SPILLS OF MATERIAL INTO SUITABLE RETAINING AREA OF CONTAINERS
WITH LARGE QUANTITIES OF WATER. SMALL SPILLS CAN BE ABSORBED BY
APPROPRIATE INERT ABSO RBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR FLAMES OR AT
ELEVATED TEMPERATURES.
Other Precautions:READ CAREFULLY ALL CAUTIONS AND DIRECTIONS ON PRODUCT
LABEL BEFORE USE. SINCE EMPTY CONTAINER RETAINS RESIDUE, FOLLOW ALL
LABEL WARNINGS EVEN AFTER CONTAINER IS EMPTY. DISPOSE OF EMPTY
CONTAINER ACCOR DING TO LOCAL REGULATIONS.

Exposure Controls

Respiratory Protection:FOR OSHA CNTRLD WORK PLACE, USE ONLY W/ADEQ VENT
UNDER ENGINEERED AIR CNTRL SYS DESIGNED TO PROVIDE MAX APPROP TLV.
FOR OCCAS USE WHERE ENGINEERED AIR CONTROL IS NOT FEASIBLE, USE
NIOSH/MSHA APPRVD RE SPS. FOR OCCAS CONSUMER USE, (SUPDAT)
Ventilation:ADEQUATE VENTILATION MUST BE PROVIDED. SEE RESPIRATORY
PROTECTION.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:ANSI APPROVD CHEM WORKER GOGGLES .
Other Protective Equipment:VARYING APPLICATION METHODS CAN DICTATE USE
OF ADDITIONAL PROTECTIVE SAFETY EQUIPMENT, SUCH AS IMPERMEABLE
APRONS, ETC.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
RESPIRATORY PROTECTION: USE ONLY WITH ADEQUATE VENTILATION.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>370F,>188C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:0.78
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE RECOGNIZED.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.