BWBYF - 2000 RT DEVELOPER/REPLENISHER 2.5 GAL, 741759

  • MSDS: BWBYF
  • Manufacturer: ILFORD PHOTO
  • Product Name: 2000 RT DEVELOPER/REPLENISHER 2.5 GAL, 741759
  • National Stock Number: 6750-00N056057
Product Identification

Product ID:2000 RT DEVELOPER/REPLENISHER 2.5 GAL, 741759
MSDS Date:03/30/1993
FSC:6750
NIIN:00N056057
MSDS Number: BWBYF

Responsible Party
ILFORD PHOTO
W 70 CENTURY RD
PARAMUS, NJ 07653
US

Emergency Phone: 800-842-9660

Info Phone: 201-265-6000

Cage: IO762

Contractor
ILFORD PHOTO CORP
PARAMUS, NJ 07653 US

Telephone: 201-265-6000

Cage: 64145

Ingredients

1)

CAS: 7757-83-7

RTECS: WE2150000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K


1)

CAS: 584-08-7

RTECS: TS7750000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K


(ORAL,RAT) 320 MG/KG

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: 2-5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PENIETIC ACID, PENTA SODIUM SALT

CAS: 140-01-2

Fraction By Weight: 1-3%

OSHA PEL N/K

ACGIH TLV: N/K


HYDROXYMETHYL-4-METHYL-1-PHENYL-3-PYRAZOLIDONE

CAS: 13047-13-7

Fraction By Weight: <1%

OSHA PEL N/K

ACGIH TLV: N/K


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-80%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 4
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:IRRITATION.
SKIN:IRRITATION, MAY CAUSE CONTACT DERMATITIS. INHALATION:LOW
HAZARD WITH TYPICAL HANDLING AND USE. INGESTION:MAY INDUCE
TINNITIS, NAUSEA, DIZZINESS, VOMITING, PALLOR OR INCREAS ED
RESPIRATION RATE. CHRONIC:SKIN:PROLONGED CONTACT MAY CAUSE
DERMATITIS. EXPOSURE TO HYDROQUINONE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:MAY CAUSE ALLERGIC SKIN REACTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . EYES:FLUSH W/WATER FOR @ LEAST 15 MINUTES. GET MED ATTN.
SKIN:REMOVE CONTAMD CLTHG & WASH AFFECTED AREAS W/SOAP & WATER. IF
IR RIT OR DERM PERSISTS, GET MED ATTN. WASH CONTAMD CLTHG BEFORE
REUSE. INGEST:IF CONSCIOUS, GIVE 3-4 GLASSES OF WATER. DO NOT
INDUCE VOMITING. GET MED ATTN.

Fire Fighting

Flash Point:NOT FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FIRE AND EXCESSIVE HEAT MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:FLUSH SM QTYS TO SEWER W/LG AMTS OF WATER.
CONTAIN & ABSORB LG SPILLS, SWEEP UP AND PLACE IN DOT APPRVD
RECEPTICLES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:TO USE PRODUCT SAFELY, READ MSDS,
LABELS & INSTRUCTIONS & CARRY OUT APPROP PRECAUT. STORE IN COOL DRY
AREA AWAY FROM ACIDS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NOT REQD. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL - GOOD ROOM VENT, 10-12 ROOM VOLUME CHANGES PER
HR.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1.285 (H*20=1)
pH:10.6
Evaporation Rate & Reference:SLOW
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT YELLOW COLOR WITH SLIGHT ODOR
Percent Volatiles by Volume:65(WT)

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:OXIDES OF SULFUR.

Disposal

Waste Disposal Methods:DISCHARGE, TREATMENT OR DISPOSAL MAY BE SUBJECT
TO LIMITATIONS IMPOSED BY FEDERAL, STATE OR LOCAL REGULATIONS. MAY
REQUIRE DISPOSAL BY AN APPROVED CONTRACTOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.