BWCRB - 1 SHOT LOW TEMP REDUCER 6001
- MSDS: BWCRB
- Manufacturer: CONSUMERS PAINT FACTORY INC
- Product Name: 1 SHOT LOW TEMP REDUCER 6001
- National Stock Number: 8010-00N055880
Product Identification
Product ID:1 SHOT LOW TEMP REDUCER 6001
MSDS Date:03/17/1994
FSC:8010
NIIN:00N055880
MSDS Number: BWCRB
Responsible Party
GARY, IN 46406-1563
US
Emergency Phone: 219-949-1684/800-424-9300(CHEMTREC)
Info Phone: 219-949-1684/POISON 800-854-6813
Cage: 13294
Contractor
Telephone: 219-949-1684/800-424-9300(CHEMTREC)
Cage: 13294
Ingredients
BENZENE, TRIMETHYL-(MIXED ISOMERS); (TRIMETHYLBENZENE)
CAS: 25551-13-7
RTECS: DC3220000
Fraction By Weight: 5-10%
OSHA PEL 25 PPM
ACGIH TLV: 25 PPM
BENZENE, 1,2,4-TRIMETHYL-; (1,2,4-TRIMETHYLBENZENE) (SARA
CAS: 95-63-6
RTECS: DC3325000
Fraction By Weight: 1-5%
OSHA PEL 25 PPM
ACGIH TLV: 25 PPM
VM & P NAPHTHA
CAS: 64742-89-8
Fraction By Weight: 75-85%
OSHA PEL N/K
ACGIH TLV: N/K
XYLENE (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM; 150 STEL
ACGIH TLV: 100 PPM; 150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PAINT MUST BE SHIPPED IN METAL CNTNRS & PACKED IN
RTECS: 9999999ZZ
OF THE MATERIAL & THE FLASH POINT MARKED ON THE
RTECS: 9999999ZZ
FLAMMABLE LIQUIDS AS SUGGESTED BY THE NFPA.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: CAN CAUSE IRRIT OF RESP
TRACT, HDCH, NAUS, CNS DEPRESS, FATIGUE OR UNCON. INGEST: SEVERE GI
DISTURBS CAN OCCUR INCLUDING NAUS, VOMIT, ANOREXIA & CONSTIP. ASPIR
OF PROD INTO LUNGS CAN CAU SE CHEM PNEUM WHICH MAY BE FATAL.
EYES:CAN CAUSE SEV IRRIT, REDNESS, TEARING & BLURRED VISION. CONJ &
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CORNEAL INJURY MAY ALSO RSLT. SKIN:
CAN CAUSE IRRIT & DRYING OF SKIN. MAY ALSO CAUSE DERM &
ULCERATIONS. CHRONIC: INHAL & INGEST: PRLNG OVEREXP TO SOLVS CAN
CAUSE KIDNEY, LIVER & OTHER SYSTE MIC DMG. EXPOS TO SOLVS FOR PRLNG
TIMESAT MODERATE LEVELS CAN AFFECT HIGHER BRAIN FUNCTIONS & MENTAL
CAPACITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: IF OVERCOME BY VAPORS, REMOVE TO FRESH AIR. IF NOT
BRTHG, RESTORE BRTHG. GET MED HELP OR MD IMMED. EYES: FLUSH W/LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MIN. GET MED HELP OR MD IMMED.
SKIN: R EMOVE EXCESS MATL W/PAPER TOWELS OR RAGS. WASH W/MILD SOAP
& WARM WATER. IF ANY REDNESS OR SWELLING PERSISTS, GET MED ATTN.
INGEST: DO NOT INDUCE VOMIT. GET MED HELP OR MD IMMED.
Fire Fighting
Flash Point Method:SCC
Flash Point:57.0F,13.9C
Lower Limits:1%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY SHOULD BE
USED TO COOL CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:AVOID SOURCES OF IGNIT, FLAME, STATIC
ELEC, HEAT OR ELEC SPARK. CNTNRS SHOULD BE GROUNDED WHEN POURING.
ALL ELEC EQUIP & INSTALLATIONS SHOULD BE MADE & (SUPDAT)
Accidental Release
Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES &
OTHER SOURCES OF IGNITION. ABSORB WITH SOLID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED, PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SECURE CLOSURES & KEEP CONTAINERS
UPRIGHT TO PREVENT LEAKAGE. STORE IN COOL, WELL VENTILATED AREA
AWAY FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:AVOID FREE FALL OF LIQ IN EXCESS OF FEW INCHES. DO
NOT FLAME CUT, BRAZE OR WELD W/OUT NIOSH/MSHA APPRVD MECH FILTER
RESP OR APPROP & ADEQ VENT. IF WORKERS ARE EXPOSED TO SPRAY
APPLICATION OR ABRASIVE BLAST CLEANING, ENGINEERING & (SUPDAT)
Exposure Controls
Respiratory Protection:ORGANIC VAPOR RESPIRATOR WITH PARTICULATE FILTER
APPROVED BY NIOSH/MSHA.
Ventilation:LOC EXHST: PREFERRED. PAINT SPRAY BOOTH. 150 PPM FACE
VELOCITY. MECHANICAL (GEN): ACCEPTABLE FOR SM VOLUME APPLICATIONS.
Protective Gloves:BUTYL RUBBER OR EQUIVALENT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 0.73-0.89 (H*2O=1). EXPLO HAZ: GROUNDED I/A/W NATL ELEC
CODE. WORKERS ARE REQD TO USE ONLY NON-FERROUS TOOLS & WEAR NON-SPK
SHOES IN AREAS WHERE EXPLOS HAZS EXIST. OTHER PREC: ADMIN CTLS MU
ST BE USED TO MAINTAIN EXPOS LEVEL BELOW OSHA REQD LEVEL OR USE
NIOSH/MSHA APPRVD MECH FILTER RESP FOR PROT. (ING 5)
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>240F,>116C
Vapor Pres:0.5-15
Vapor Density:4.1-5.4
Spec Gravity:SUPDAT
Evaporation Rate & Reference:9-151 (ETHER =1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE LIQUID AND CHARACTERISTIC PETROLEUM
ODOR.
Percent Volatiles by Volume:80-100
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, NO*X.
Disposal
Waste Disposal Methods:DISPOSE AS PAINT WASTE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.