Product ID:PRISMA-FIL
MSDS Date:01/01/1987
FSC:6520
NIIN:01-222-9948
MSDS Number: BWHBM

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511/800-532-2855

Cage: 11107

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

METHACRYLATE (STRUCTURE UNKNOWN)

ACRYLATE

URETHANE RESIN(EG.URETHANE ACRYLATE OR METHACRYLATE)

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PERSON SENSITIVE TO
METHACRYLATES,ACRYLATES AND URETHANES MAY DEVELOP AN ALLERGIC
RESPONSE.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:ALLERGIC RESPONSE:REDNESS,DIFFICULTY BREATHING.
Medical Cond Aggravated by Exposure:PERSONS WITH SENSITIVITY TO
METHACRYLATES,ACRYLATES AND URETHANES MAY BE AT INCREASED RISK FROM
EXPOSURE.

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH SOAP AND
WATER.EYES:FLUSH WITH WATER FOR 15 MINUTES.INHAL:UNLIKELY TO BE
NEEDED.INGEST:DO NOT INDUCE VOMITING.GET PROMPT QUALIFIED MEDICAL
ATTENTION.

Flash Point:NONE
Extinguishing Media:SAND,DRY CHEMICAL,CARBON DIOXIDE,FOAM.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:FIRE CONDITIONS MAY EVOLVE TOXIC FUMES.

Spill Release Procedures:**AVOID SKIN CONTACT** USE GLOVES;SCOOP INTO A
DRY CONTAINERS.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE BELOW 122F.AVOID VIASBLE LIGHT.
Other Precautions:KEEP AWAY FROM FOOD.

Respiratory Protection:NOT NEEDED IN NORMAL SERVICE.
Ventilation:NOT NEEDED IN NORMAL SERVICE.
Protective Gloves:LATEX OR VINYL
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:NOT NEEDED IN NORMAL SERVICE.
Work Hygienic Practices:USE REASONABLE CARE IN HANDLING THIS
PRODUCT.WASH HANDS AFTER USE AND BEFORE EATING.
Supplemental Safety and Health
NONE

HCC:N1
Spec Gravity:2.2
Solubility in Water:INSOLUBLE
Appearance and Odor:PASTE;OFF-WHITE TO YELLOW-GRAY;ACRYLATE ESTER ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:LIGHT IN THE VIABLE SPECTRUM(WHILE PRODUCT
IS A PASTE),TEMPERATURES ABOVE 122F.
Hazardous Decomposition Products:METHACRYLATES.
Conditions to Avoid Polymerization:VISBLE LIGHT CAUSES THIS PRODUCT TO
HARDEN.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.