BWLWD - S-930 ION EXCHANGE RESIN
- MSDS: BWLWD
- Manufacturer: THE PUROLITE CO
- Product Name: S-930 ION EXCHANGE RESIN
- National Stock Number: 6850-00N056726
Product Identification
Product ID:S-930 ION EXCHANGE RESIN
MSDS Date:01/01/1994
FSC:6850
NIIN:00N056726
MSDS Number: BWLWD
Responsible Party
BALA CYNWYD, PA 19004
US
Emergency Phone: 800-343-1500
Info Phone: 215-668-9090
Cage: IO957
Contractor
Telephone: 610-668-9090
Cage: 67168
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:LIKE OTHER FOREIGN BODIES,
PARTICLES MAY CAUSE MECHANICAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYE:FLUSH W/LARGE AMOUNTS OF WATER F OR
AT LEAST 15 MINUTES. CONSULT MD IF IRRITATION PERSISTS.
Fire Fighting
Extinguishing Media:CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP & TRANSFER
TO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP DRUMS & PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) & ABOVE 0C (32F).
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE.
Ventilation:LOCAL EXHAUST: NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE.
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
PH:5-7 (AQUEOUS SLURRY).
Chemical Properties
Spec Gravity:1.23 (H*2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER SPHERICAL BEADS W/OUT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/CONCENTRATED NITRIC ACID OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES >220C (428F).
Hazardous Decomposition Products:CO, CO*2, DIVINYLBENZENE, OXIDES OF
NITROGEN.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY TRASH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.